dsx3PCV24HrThreshold
CISCO-MGX82XX-DSX3-MIB ·
.1.3.6.1.4.1.351.110.4.4.1.2.1.1.17
Object
column
r/w
Integer32
The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval This object is not supported in CESM-T3/E3. This object is not applicable for E3 interface.
Context
- MIB
- CISCO-MGX82XX-DSX3-MIB
- OID
.1.3.6.1.4.1.351.110.4.4.1.2.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dsx3AlarmConfigEntry
- Table
- dsx3AlarmConfigTable
- Siblings
- 38
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx3RedSeverity This variable is used to setup the severity of RED
alarm. So when LOS/LOF alarm is detected the card will
send the alarm with appropriate severity status.
A major alarm will cause… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.1 |
| dsx3LCV15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.10 |
| dsx3LCV24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.11 |
| dsx3LES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.12 |
| dsx3LES24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.13 |
| dsx3LSES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.14 |
| dsx3LSES24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.15 |
| dsx3PCV15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared.
This object is not supported in CESM-T3/E3… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.16 |
| dsx3PES15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared.
This object is not supported in CESM-T3/E3… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.18 |
| dsx3PES24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 mi… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.19 |
| dsx3RAISeverity This variable is used to setup the severity of RAI
alarm. So when RAI alarm is detected the card will
send the alarm with appropriate severity status.
A major alarm will cause the… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.2 |
| dsx3PSES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
This object does not apply to… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.20 |
| dsx3PSES24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 m… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.21 |
| dsx3SEFS15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
This object is not supported in CESM-T3/E3 | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.22 |
| dsx3SEFS24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.23 |
| dsx3AISS15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
This object is not supported in CESM-T3/E3 | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.24 |
| dsx3AISS24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.25 |
| dsx3UAS15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.26 |
| dsx3UAS24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.27 |
| dsx3E3BIP8CV15MinThreshold G.832 BIP-8 error monitoring byte. 15 minute
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS
This object is not supported in CESM-T3/E… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.28 |
| dsx3E3BIP8CV24HrThreshold G.832 BIP-8 error monitoring byte. 24 hour
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS.
This object … | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.29 |
| dsx3NEAlarmUpCount This parameter specifies the increment to the
Near End alarm integration counters. The local
alarms are LOS and LOF. The Default value is 6
and the integration counter is increme… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.3 |
| dsx3E3BIP8ES15MinThreshold G.832 BIP-8 error monitoring byte. 15 minute
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS.
This objec… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.30 |
| dsx3E3BIP8ES24HrThreshold G.832 BIP-8 error monitoring byte. 24 hour
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS
This object is not supported in CESM-T3/E3 | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.31 |
| dsx3E3BIP8SES15MinThreshold G.832 BIP-8 error monitoring byte. 15 minute
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS
This object is not supported in CESM-T3/E3 | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.32 |
| dsx3E3BIP8SES24HrThreshold G.832 BIP-8 error monitoring byte. 24 hour
threshold value.
This has no significance to E3 with G.751 framing
which is used in FRSM-VHS
This object is not supported in CESM-T3/E3 | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.33 |
| dsx3CCV15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared.
This object is not applicab… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.34 |
| dsx3CCV24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 mi… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.35 |
| dsx3CES15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared.
This object is not applicab… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.36 |
| dsx3CES24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
This object is not ap… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.37 |
| dsx3CSES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
This object is not applicable… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.38 |
| dsx3CSES24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared.
This object is not appl… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.39 |
| dsx3NEAlarmDownCount This parameter specifies the decrement to the
Near End alarm integration counters. The local
alarms are LOS and LOF. The Default value is 1 and
the integration counter is decre… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.4 |
| dsx3NEAlarmThreshold The value set in this object determines the value that
the alarm integration counter must reach for an near end
Alarm to be declared. If the up count is 6, the down count
is 1 and… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.5 |
| dsx3FEAlarmUpCount This parameter specifies the increment to the
Far End alarm integration counters. The local alarms
are RAI and AIS. The Default value is 6 and the
integration counter is increm… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.6 |
| dsx3FEAlarmDownCount This parameter specifies the decrement to the
Far End alarm integration counters. The local alarms
are AIS and RAI. The Default value is 1. The integration
counter is decrement… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.7 |
| dsx3FEAlarmThreshold The value set in this object determines the value that
the alarm integration counter must reach for an far end
Alarm to be declared. If the up count is 6, the down count
is 1 and … | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.8 |
| dsx3StatisticalAlarmSeverity This variable is used to setup the severity of
any of the Statistical alarms. So when a
Statistical Counter exceeds its specified threshold
the card will send the alarm with ap… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.1.2.1.1.9 |