dsx3CounterEntry
CISCO-MGX82XX-DSX3-MIB ·
.1.3.6.1.4.1.351.110.4.4.1.4.1.1
Object
row
An entry in the table. Statistics are gathered for each ds3/e3 interface. An entry is created automatically for each ds3/e3 interface that is activated.
Context
- MIB
- CISCO-MGX82XX-DSX3-MIB
- OID
.1.3.6.1.4.1.351.110.4.4.1.4.1.1- Type
- row
- Status
- current
- Parent
- dsx3CounterTable
- Table
- dsx3CounterTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx3RcvLOSCount The number of times the Loss of Signal was detected
with or without integrating to LOS alarm. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.1 |
| dsx3RcvPERRCounter The number of P-bit parity error.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.10 |
| dsx3RcvFEBECounter The number of Far-end block error.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.11 |
| dsx3RcvEXZCounter The number of excessive zeros
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.12 |
| dsx3LCVCount The counter associated with the number of Line
Coding Violations encountered by a DS3/E3 interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.13 |
| dsx3RcvOOFCount The number of times the Out of Frame was detected
with or without integrating to OOF alarm.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.2 |
| dsx3RAICount The number of times Yellow Alarms was detected with
or without integrating to RAI alarm.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.3 |
| dsx3CCVCount The counter associated with the number of C Bit
Coding Violations encountered by a DS3/E3 interface.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.4 |
| dsx3FECount The number of Framing Pattern Errors encountered by
a DS3/E3 interface.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.5 |
| dsx3AtmHECCount The number of Header Check Sequence(HCS) Errors.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.6 |
| dsx3AtmHECSecCount The number of HEC errored seconds.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.7 |
| dsx3AtmSEHECSecCount The number of Severely HEC error seconds.
This object is not supported in CESM-T3/E3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.8 |
| dsx3CounterClrButton This variable is used to clear all the counters. | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.1.4.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx3LineNum This object is the identifier of a DS3/E3
Interface on a managed device.
The range supported depends upon the type of
the card(controller card, service module).
… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.1.1.1.1.1 |