cldDot116GHzDynamicChannelAssignment

CISCO-LWAPP-DOT11-MIB · .1.3.6.1.4.1.9.9.612.1.1.23.3
MIB view Table view

Object

scalar r/w Enumeration 
This attribute for 6GHz band specifies the Dynamic channel assignment
(DCA) which has three modes. When the mode is auto, the channel
assignment will be periodically updated for all Cisco APs that permit
this operation. When the DCA is runOnce, channel assignments are updated 
based on the UPDATE_CMD received from the management. When the DCA is
static, no dynamic channel assignments occurs and value are
set to their global default. Default is auto.

Context

MIB
CISCO-LWAPP-DOT11-MIB
OID
.1.3.6.1.4.1.9.9.612.1.1.23.3
Type
scalar
Access
readwrite
Status
current
Parent
cldDot116GHzGlobalConfig
Siblings
11

Syntax

Enumeration

Values & Constraints

Enumerated Values
1automatic
2runOnce
3static

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cldDot116GHzNetworkStatus
Dot11 6GHz Network Status
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.612.1.1.23.1
cldDot116GHzPowerUpdateCmdStatus
After setting cldDot116GHzChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.612.1.1.23.10
cldDot116GHz80211eMaxBandwidth
This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11 6GHz network. The value of this attribute can …
scalarInteger32.1.3.6.1.4.1.9.9.612.1.1.23.11
cldDot116GHzDTPCSupport
This attribute may be used to enable the DTPC support on all 802.11 6GHz radios. DTPC or Dynamic Transmit Power Control support means that the radio's transmit power will be adver…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.612.1.1.23.12
cldDot116GHzBeaconPeriod
This attribute for 6GHz band shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response fr…
scalarUnsigned32.1.3.6.1.4.1.9.9.612.1.1.23.2
cldDot116GHzDynamicChannelUpdateInterval
When Channel dynamic alogirthm is running, this interval(in secs) for 6GHz band specifies how often Channel assignement updates are attempted on an Cisco AP. NOTE: hysteresis is b…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.612.1.1.23.4
cldDot116GHzChannelUpdateCmdInvoke
This attribute for 6GHz band, when set to activate, starts a DCA calculation regardless of the dynamic update interval. This command should be invoke on Group Leader Cisco Switch…
scalarEnumeration.1.3.6.1.4.1.9.9.612.1.1.23.5
cldDot116GHzChannelUpdateCmdStatus
After setting cldDot116GHzChannelUpdateCmdInvoke to activate, the result of action can be monitored from here. It takes 5 minutes for the command to complete.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.612.1.1.23.6
cldDot116GHzDynamicTransmitPowerControl
This attribute for 6GHz band represents the Dynamic transmit power(DTP) mode, which is of three types. When the mode is auto, the transmit power of each Cisco AP will be periodi…
scalarEnumeration.1.3.6.1.4.1.9.9.612.1.1.23.7
cldDot116GHzCurrentTxPowerLevel
This attribute for 6GHz band represents the TxPowerLevel N that is is currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity r…
scalarInteger32.1.3.6.1.4.1.9.9.612.1.1.23.8
cldDot116GHzPowerUpdateCmdInvoke
This attribute for 6GHz band, when set to activate, starts a DTP calculation regardless of the dynamic update interval. This command should be invoked on Group Leader Cisco Switc…
scalarEnumeration.1.3.6.1.4.1.9.9.612.1.1.23.9