CISCO-LWAPP-DOT11-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
57

cldHtMacOperationsTable

table
.1.3.6.1.4.1.9.9.612.1.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldHtMacOperationsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cldHtMacOperationsTable' 
This table represents the operational parameters
at the MAC layer for the 802.11n networks managed 
through the controller. An agent adds an entry to 
this table for every 802.11n band on startup.
cldHtMacOperationsEntry row .1.3.6.1.4.1.9.9.612.1.1.1.1
Each entry represents the operational parameters
at the MAC layer for 802.11n networks.
Indexes
Column Syntax OID
cldHtDot11nBand
This object identifies the 802.11n band the parameters
correspond to.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.1.1.1
cldHtDot11nChannelBandwidth
This object represents the channel bandwidth for
the 802.11n networks in the particular band.
CISCO-LWAPP-TC-MIBCLDot11ChannelBandwidthr/w
Type Values:
1five
2ten
3twenty
4aboveforty
5belowforty
 .1.3.6.1.4.1.9.9.612.1.1.1.1.2
cldHtDot11nRifsEnable
This object is used to indicate the support for RIFS on
this band. A value of 'true' indicates that RIFS is
enabled for this band. A value of 'false' indicates that
RIFS is disabled for this band.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.1.1.3
cldHtDot11nAmsduEnable
This object is used to indicate the support for 802.11n
A-MSDU on this band. A value of 'true' indicates that
A-MSDU is enabled for this band. A value of 'false'
indicates that A-MSDU is disabled for this band.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.1.1.4
cldHtDot11nAmpduEnable
This object is used to indicate the support for 802.11n
A-MPDU on this band. A value of 'true' indicates that
A-MPDU is enabled for this band. A value of 'false'
indicates that A-MPDU is disabled for this band.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.1.1.5
cldHtDot11nGuardIntervalEnable
This object is used to indicate the support for 802.11n
guard interval on this band. A value of 'true' indicates
that guard interval is enabled for this band. A value of
'false' indicates that guard interval is disabl…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.1.1.6
cldHtDot11nEnable
This object is used to enable the controller to manage
802.11n networks. A value of 'true' means the 802.11n
network is enabled. A value of 'false' means the 802.11n
network is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.1.1.7

cld11nMcsTable

table
.1.3.6.1.4.1.9.9.612.1.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11nMcsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11nMcsTable' 
This table lists the MCS data rates used on the
802.11n networks managed by this controller.
cld11nMcsEntry row .1.3.6.1.4.1.9.9.612.1.1.4.1
An entry in this table represents a MCS data rate for 802.11n
band which is uniquely identified by cld11nMcsDataRateIndex
and cld11nMcsBand.
All entries are added by the controller at startup.
cld11nMcsDataRate are cal…
Indexes
Column Syntax OID
cld11nMcsBand
This object identifies the 802.11n band to which
the data rate is applicable.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.4.1.1
cld11nMcsDataRateIndex
This object uniquely identifies the data rate
for a particular band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.4.1.2
cld11nMcsDataRate
The object represents the data rate value for this
band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.4.1.3
cld11nMcsSupportEnable
This object is used to enable or disable the data
rate. When this object is set to 'true' the MCS
support is enabled. When this object is set
to 'false' the MCS support is disabled..
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.4.1.4
cld11nMcsChannelWidth
The object represents the channel width for which
cld11nMcsDataRate has been calculated.
MHzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.4.1.5
cld11nMcsGuardInterval
The object represents the guard interval for which
cld11nMcsDataRate has been calculated.
nsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.4.1.6
cld11nMcsModulation
The object represents the modulation used to calculate
cld11nMcsDataRate.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.612.1.1.4.1.7

cld11acMcsTable

table
.1.3.6.1.4.1.9.9.612.1.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11acMcsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11acMcsTable' 
This table is used to configure 802.11ac specific MCS
data rate settings on a controller.
cld11acMcsEntry row .1.3.6.1.4.1.9.9.612.1.1.6.1
An entry in this table represents the additional MCS data
rate for 802.11ac band which is uniquely identifies by
cld11acMcsSpatialStreamIndex and cld11acMcsDataRateIndex.
All entries are added by the controller at st…
Indexes
Column Syntax OID
cld11acMcsSpatialStreamIndex
The object represents the spatial stream number
related to MCS data rate settings on the 802.11ac
band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.6.1.1
cld11acMcsDataRateIndex
This object uniquely identifies the data rate
for a particular band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.6.1.2
cld11acMcsSupportEnable
This object is used to enable or disable the data
rate. When this object is set to 'true' the MCS
support is enabled. When this object is set
to 'false' the MCS support is disabled..
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.6.1.3

cld11axConfigTable

table
.1.3.6.1.4.1.9.9.612.1.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axConfigTable' 
This table represents the operational parameters
at the MAC layer for the 802.11ax networks managed
through the controller. An agent adds an entry to
this table for every 802.11ax band on startup.
cld11axConfigEntry row .1.3.6.1.4.1.9.9.612.1.1.10.1
Each entry represents the configurational parameters
of 802.11ax networks.
Indexes
Column Syntax OID
cldDot11axBandId
This object represents the 802.11ax band the parameters
correspond to.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.10.1.1
cldDot11axEnable
This object specifies the status of 802.11ax networks
in controller. A value of 'true' means the 802.11ax
network is enabled. A value of 'false' means the 802.11ax
network is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.10.1.2

cld11axMcsTable

table
.1.3.6.1.4.1.9.9.612.1.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axMcsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axMcsTable' 
This table represents the operational parameters
at the MAC layer for the 802.11ax networks managed 
through the controller. An agent adds an entry to 
this table for every 802.11ax band on startup.
cld11axMcsEntry row .1.3.6.1.4.1.9.9.612.1.1.11.1
Each entry represents the configurational parameters
of 802.11ax networks.
Indexes
Column Syntax OID
cldDot11axBand
This object represents the 802.11ax band the parameters
correspond to.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.11.1.1
cld11axMcsSpatialStreamIndex
The object represents the spatial stream number
related to MCS data rate settings on the 802.11ax
band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.11.1.2
cld11axMcsDataRateIndex
This object represents the data rate for a
particular band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.11.1.3
cld11axMcsSupportEnable
This object specifies a option to enable or disable the data
rate.
A value of 'true' indicates the MCS support is enabled.
A value of 'false' indicates the MCS support is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.11.1.4

cldDot11axHeCapTable

table
.1.3.6.1.4.1.9.9.612.1.1.12 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldDot11axHeCapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cldDot11axHeCapTable' 
This table represents the HE capabilities
at the MAC layer for the 802.11ax networks managed
through the controller. An agent adds an entry to
this table for every 802.11ax band on startup.
cldDot11axHeCapEntry row .1.3.6.1.4.1.9.9.612.1.1.12.1
Each entry represents the configurational HE parameters
of 802.11ax networks.
Indexes
Column Syntax OID
cldDot11IsHeCapable
The object represents the HE capability of
802.11ax radio.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.12.1.1
cldDot11IsHeEnable
The object represents status of HE mode of
802.11ax radio.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.12.1.2
cldDot11HeSuBF
The object represents the AP operation as a
SU beamformer in HE mode status.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.12.1.3
cldDot11HeMuBF
The object represents the AP operation as a
MU beamformer in HE mode status.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.12.1.4
cldDot11HeStbcMode
The object represents the HE STBC TX-RX mode
status of the AP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.12.1.5
cldDot11HeAmpduTidBmap
The object represents the number of TIDs. The value
is number of TIDs minus 1 of QoS Data frames that an
HE STA can aggregate in a multi-TID AMPDU.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.12.1.6
cldDot11HeCapTxRxMcsNss
The object represents Tx Rx HE MCS NSS Support of AP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.12.1.7

cld11axMbssidTable

table
.1.3.6.1.4.1.9.9.612.1.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axMbssidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axMbssidTable' 
This table represents the configuration of 802.11ax
specific Mbssid settings on a controller.
cld11axMbssidEntry row .1.3.6.1.4.1.9.9.612.1.1.13.1
An entry in this table represents the Mbssid parameters
on a controller.
Indexes
Column Syntax OID
cldBand
This object represents the 802.11ax band the parameters
correspond to.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.13.1.1
cld11axMbssidCap
This object specifies the state of the Mbssid support on
802.11ax networks. A value of 'true' means Mbssid in the
network is enabled. A value of 'false' means Mbssid in the
network is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.13.1.2

cld11axTargetWakeupTimeTable

table
.1.3.6.1.4.1.9.9.612.1.1.15 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axTargetWakeupTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axTargetWakeupTimeTable' 
This table represents the configuration of 802.11ax
specific target wake-up time settings on a controller.
cld11axTargetWakeupTimeEntry row .1.3.6.1.4.1.9.9.612.1.1.15.1
An entry in this table represents the target wake-up time
parameters on a controller.
Indexes
Column Syntax OID
cld11axTargetWakeupTimeEnable
This object specifies whether 802.11ax target wake-up time is enabled
or disabled.
Target wake-up time is a function that permits an AP to
define a specific time or set of times for individual stations
to access the me…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.15.1.1

cld11axTargetWakeupTimeBroadcastTable

table
.1.3.6.1.4.1.9.9.612.1.1.16 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axTargetWakeupTimeBroadcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axTargetWakeupTimeBroadcastTable' 
This table represents the 802.11ax target wake-up time broadcast 
configurations on a controller.
cld11axTargetWakeupTimeBroadcastEntry row .1.3.6.1.4.1.9.9.612.1.1.16.1
An entry in this table represents the target wake-up time broadcast
parameters on a controller.
Indexes
Column Syntax OID
cld11axTargetWakeupTimeBroadcastEnable
This object specifies whether 802.11ax target wake-up time broadcast
is enabled or disabled.

A value of 'true' indicates that 802.11ax target wake-up time broadcast
is enabled.
A value of 'false' indica…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.16.1.1

cld11axBssColorConfigTable

table
.1.3.6.1.4.1.9.9.612.1.1.17 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axBssColorConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axBssColorConfigTable' 
This table represents the configuration of network
802.11ax BSS Color settings on a controller.
cld11axBssColorConfigEntry row .1.3.6.1.4.1.9.9.612.1.1.17.1
An entry in this table represents the 802.11ax
BSS Color network parameters on a controller.
Indexes
Column Syntax OID
cld11axBssColorState
This object specifies the state of the BSS Color support on
802.11ax networks. A value of 'true' means BSS Color in the
network is enabled. A value of 'false' means BSS Color in the
network is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.17.1.1

cld11axBssColorRadioTable

table
.1.3.6.1.4.1.9.9.612.1.1.18 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axBssColorRadioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axBssColorRadioTable' 
This table represents AP radio-specific 802.11ax
BSS Color capability and configuration.
cld11axBssColorRadioEntry row .1.3.6.1.4.1.9.9.612.1.1.18.1
Each entry represents an 802.11ax BSS color parameter
for the given AP radio.
Indexes
Column Syntax OID
cld11axIsBssColorCapable
The object represents the 802.11ax BSS color capability
of the radio.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.18.1.1
cld11axBssColor
The object represents the configured BSS color of the
802.11ax radio. Valid values are between 0 and 63, where
0 means disabled. This attribute can be set only if
cld11axBssColorConfigType is set to customized.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.9.9.612.1.1.18.1.2
cld11axBssColorConfigType
If this value is 1 (automatic), then cld11axBssColor is
assigned by dynamic algorithm and read-only. If this value
is 2 (customized), then cld11axBssColor is read-write and
allowed to be set
Enumerationr/w
Enumerated Values:
1automatic
2customized
 .1.3.6.1.4.1.9.9.612.1.1.18.1.3

cldConfiguredCountryTable

table
.1.3.6.1.4.1.9.9.612.1.1.19 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldConfiguredCountryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cldConfiguredCountryTable' 
This table provides the list of all configured
countries on the wlc.
cldConfiguredCountryEntry row .1.3.6.1.4.1.9.9.612.1.1.19.1
A conceptual row in cldConfiguredCountryTable.
Each entry in this table corresponds to a country
configured on wlc which is identified by cldConfiguredCountryCode.
Entries can be added/deleted by explicit management act…
Indexes
Column Syntax OID
cldConfiguredCountryCode
This object represents the country configured on the wlc.
Unsigned32
Constraints:
range: 1-252
 .1.3.6.1.4.1.9.9.612.1.1.19.1.1
cldConfiguredCountryRowStatus
This object specifies the row to be added or
deleted in this table.
r/w .1.3.6.1.4.1.9.9.612.1.1.19.1.2

cld11axObssPdConfigTable

table
.1.3.6.1.4.1.9.9.612.1.1.20 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11axObssPdConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11axObssPdConfigTable' 
This table represents the configuration of network
802.11ax OBSS PD settings on a controller.
cld11axObssPdConfigEntry row .1.3.6.1.4.1.9.9.612.1.1.20.1
An entry in this table represents the 802.11ax
OBSS PD network parameters on a controller.
Indexes
Column Syntax OID
cld11axObssPdEnable
This object specifies the state of the OBSS PD spatial reuse
support on 802.11ax networks. A value of 'true' means OBSS PD
in the network is enabled. A value of 'false' means OBSS PD in
the network is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.20.1.1
cld11axNonSrgObssPdMax
This object specifies the non-SRG OBSS PD max threshold in dBm on
802.11ax networks.
Integer32r/w
Constraints:
range: -82--62
 .1.3.6.1.4.1.9.9.612.1.1.20.1.2
cld11axSrgObssPdEnable
This object specifies the state of the SRG OBSS PD spatial reuse
support on 802.11ax networks. A value of 'true' means SRG OBSS PD
in the network is enabled. A value of 'false' means SRG OBSS PD in
the network is disabl…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.20.1.3
cld11axSrgObssPdMin
This object specifies the SRG OBSS PD min threshold in dBm on
802.11ax networks.
Integer32r/w
Constraints:
range: -82--62
 .1.3.6.1.4.1.9.9.612.1.1.20.1.4
cld11axSrgObssPdMax
This object specifies the SRG OBSS PD max threshold in dBm on
802.11ax networks.
Integer32r/w
Constraints:
range: -82--62
 .1.3.6.1.4.1.9.9.612.1.1.20.1.5

cld11beMcsTable

table
.1.3.6.1.4.1.9.9.612.1.1.24 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cld11beMcsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cld11beMcsTable' 
This table represents the operational parameters
at the MAC layer for the 802.11be networks managed
through the controller. An agent adds an entry to
this table for every 802.11be band on startup.
cld11beMcsEntry row .1.3.6.1.4.1.9.9.612.1.1.24.1
Each entry represents the configurational parameters
of 802.11be networks.
Indexes
Column Syntax OID
cldDot11beBand
This object represents the 802.11be band the parameters
correspond to.
CISCO-LWAPP-TC-MIBCLDot11Band
Type Values:
1band2dot4
2band5
3maui-6ghz
 .1.3.6.1.4.1.9.9.612.1.1.24.1.1
cld11beMcsSpatialStreamIndex
The object represents the spatial stream number
related to 802.11be MCS data rate index for a
particular band
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.24.1.2
cld11beMcsDataRateIndex
This object represents the 802.11be MCS data
rate index for a particular band
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.612.1.1.24.1.3
cld11beMcsSupportEnable
This object specifies a option to enable or disable
the 802.11be MCS data rate.
A value of 'true' indicates the MCS support is enabled.
A value of 'false' indicates the MCS support is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.612.1.1.24.1.4

cldCountryTable

table
.1.3.6.1.4.1.9.9.612.1.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cldCountryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-DOT11-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-DOT11-MIB::cldCountryTable' 
This table provides the list of countries and the
network parameters specific to the respective 
countries. It shows the 802.11 networks, managed by
this controller, where controller can operate.
cldCountryEntry row .1.3.6.1.4.1.9.9.612.1.2.1.1
A conceptual row in cldCountryTable. There is an
entry in this table for each country available at
the agent, as identified by a value of cldCountryCode.
Each entry also displays the corresponding channels
supported by …
Indexes
Column Syntax OID
cldCountryCode
This object identifies the country for this entry.
The 3 letter country code for this index.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.1
cldCountryName
This object represents the name of the country for
this entry.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.2
cldCountryDot11aChannels
This object represents the 802.11a channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.3
cldCountryDot11bChannels
This object represents the 802.11b channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.4
cldCountryDot11aDcaChannels
This object represents the 802.11a DCA channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.5
cldCountryDot11bDcaChannels
This object represents the 802.11b DCA channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.6
cldCountryDot116GHzChannels
This object represents the 802.11 6GHz channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.7
cldCountryDot116GHzDcaChannels
This object represents the 802.11 6GHz DCA channels
separated by comma.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.612.1.2.1.1.8