cldDot116GHzGlobalConfig
CISCO-LWAPP-DOT11-MIB ·
.1.3.6.1.4.1.9.9.612.1.1.23
Object
node
No description available.
Context
- MIB
- CISCO-LWAPP-DOT11-MIB
- OID
.1.3.6.1.4.1.9.9.612.1.1.23- Type
- node
- Parent
- cldConfig
- Siblings
- 23
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldHtMacOperationsTable This table represents the operational parameters
at the MAC layer for the 802.11n networks managed
through the controller. An agent adds an entry to
this table for every 802.11n… | table | - | .1.3.6.1.4.1.9.9.612.1.1.1 |
| cld11axConfigTable This table represents the operational parameters
at the MAC layer for the 802.11ax networks managed
through the controller. An agent adds an entry to
this table for every 802.11ax… | table | - | .1.3.6.1.4.1.9.9.612.1.1.10 |
| cld11axMcsTable This table represents the operational parameters
at the MAC layer for the 802.11ax networks managed
through the controller. An agent adds an entry to
this table for every 802.11… | table | - | .1.3.6.1.4.1.9.9.612.1.1.11 |
| cldDot11axHeCapTable This table represents the HE capabilities
at the MAC layer for the 802.11ax networks managed
through the controller. An agent adds an entry to
this table for every 802.11ax band o… | table | - | .1.3.6.1.4.1.9.9.612.1.1.12 |
| cld11axMbssidTable This table represents the configuration of 802.11ax
specific Mbssid settings on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.13 |
| cldDot11RxsopThreshold | node | - | .1.3.6.1.4.1.9.9.612.1.1.14 |
| cld11axTargetWakeupTimeTable This table represents the configuration of 802.11ax
specific target wake-up time settings on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.15 |
| cld11axTargetWakeupTimeBroadcastTable This table represents the 802.11ax target wake-up time broadcast
configurations on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.16 |
| cld11axBssColorConfigTable This table represents the configuration of network
802.11ax BSS Color settings on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.17 |
| cld11axBssColorRadioTable This table represents AP radio-specific 802.11ax
BSS Color capability and configuration. | table | - | .1.3.6.1.4.1.9.9.612.1.1.18 |
| cldConfiguredCountryTable This table provides the list of all configured
countries on the wlc. | table | - | .1.3.6.1.4.1.9.9.612.1.1.19 |
| cldMultipleCountryCode This object represents the countries in which the
controller is operating. Multiple countries can be set.
The countries are displayed using a 3 letter code
for each country separ… | scalar | OctetString | .1.3.6.1.4.1.9.9.612.1.1.2 |
| cld11axObssPdConfigTable This table represents the configuration of network
802.11ax OBSS PD settings on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.20 |
| cldDot11NdpMode | node | - | .1.3.6.1.4.1.9.9.612.1.1.21 |
| cldDot116GHzPhy | node | - | .1.3.6.1.4.1.9.9.612.1.1.22 |
| cld11beMcsTable This table represents the operational parameters
at the MAC layer for the 802.11be networks managed
through the controller. An agent adds an entry to
this table for every 802.11be… | table | - | .1.3.6.1.4.1.9.9.612.1.1.24 |
| cldRegulatoryDomain This object represents the regulatory domains for
the controller.
Regulatory domain specifies allowed 802.11 chanels.
Multiple domains can be listed seperated with spaces. | scalar | OctetString | .1.3.6.1.4.1.9.9.612.1.1.3 |
| cld11nMcsTable This table lists the MCS data rates used on the
802.11n networks managed by this controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.4 |
| cld11acConfig | node | - | .1.3.6.1.4.1.9.9.612.1.1.5 |
| cld11acMcsTable This table is used to configure 802.11ac specific MCS
data rate settings on a controller. | table | - | .1.3.6.1.4.1.9.9.612.1.1.6 |
| cldCountryChangeNotifEnable This object is used to control the generation of
ciscoLwappDot11CountryChangeNotif notification.
A value of 'true' indicates that the agent generates
ciscoLwappDot11Cou… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.612.1.1.7 |
| cldLoadBalancing | node | - | .1.3.6.1.4.1.9.9.612.1.1.8 |
| cldBandSelect | node | - | .1.3.6.1.4.1.9.9.612.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldDot116GHzNetworkStatus Dot11 6GHz Network Status | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.612.1.1.23.1 |
| cldDot116GHzPowerUpdateCmdStatus After setting cldDot116GHzChannelUpdateCmdInvoke to
activate, the result of action can be monitored from here. It
takes 5 minutes for the command to complete. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.10 |
| cldDot116GHz80211eMaxBandwidth This represents the maximum bandwidth allocated to 802.11e
clients. It is expressed as percentage of the total bandwidth
of 802.11 6GHz network. The value of this attribute can … | scalar | Integer32 | .1.3.6.1.4.1.9.9.612.1.1.23.11 |
| cldDot116GHzDTPCSupport This attribute may be used to enable the DTPC support on all
802.11 6GHz radios. DTPC or Dynamic Transmit Power Control support
means that the radio's transmit power will be adver… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.612.1.1.23.12 |
| cldDot116GHzBeaconPeriod This attribute for 6GHz band shall specify the number of TU that
a AP Radio shall use for scheduling Beacon tranmissions.
This value is transmitted in Beacon and Probe Response
fr… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.2 |
| cldDot116GHzDynamicChannelAssignment This attribute for 6GHz band specifies the Dynamic channel assignment
(DCA) which has three modes. When the mode is auto, the channel
assignment will be periodically updated for a… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.3 |
| cldDot116GHzDynamicChannelUpdateInterval When Channel dynamic alogirthm is running, this interval(in
secs) for 6GHz band specifies how often Channel assignement
updates are attempted on an Cisco AP. NOTE: hysteresis is
b… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.4 |
| cldDot116GHzChannelUpdateCmdInvoke This attribute for 6GHz band, when set to activate,
starts a DCA calculation regardless of the dynamic update interval.
This command should be invoke on Group Leader Cisco Switch… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.5 |
| cldDot116GHzChannelUpdateCmdStatus After setting cldDot116GHzChannelUpdateCmdInvoke to
activate, the result of action can be monitored from here. It
takes 5 minutes for the command to complete. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.6 |
| cldDot116GHzDynamicTransmitPowerControl This attribute for 6GHz band represents the Dynamic transmit
power(DTP) mode, which is of three types. When the mode is auto,
the transmit power of each Cisco AP will be periodi… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.7 |
| cldDot116GHzCurrentTxPowerLevel This attribute for 6GHz band represents the TxPowerLevel N that is
is currently being used to transmit data. Some PHYs also use this
value to determine the receiver sensitivity r… | scalar | Integer32 | .1.3.6.1.4.1.9.9.612.1.1.23.8 |
| cldDot116GHzPowerUpdateCmdInvoke This attribute for 6GHz band, when set to activate, starts a DTP
calculation regardless of the dynamic update interval. This command
should be invoked on Group Leader Cisco Switc… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.9 |