cldDot116GHz80211eMaxBandwidth
CISCO-LWAPP-DOT11-MIB ·
.1.3.6.1.4.1.9.9.612.1.1.23.11
Object
scalar
r/w
Integer32
This represents the maximum bandwidth allocated to 802.11e clients. It is expressed as percentage of the total bandwidth of 802.11 6GHz network. The value of this attribute can vary from 5 to 85.
Context
- MIB
- CISCO-LWAPP-DOT11-MIB
- OID
.1.3.6.1.4.1.9.9.612.1.1.23.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cldDot116GHzGlobalConfig
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 5-85
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldDot116GHzNetworkStatus Dot11 6GHz Network Status | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.612.1.1.23.1 |
| cldDot116GHzPowerUpdateCmdStatus After setting cldDot116GHzChannelUpdateCmdInvoke to
activate, the result of action can be monitored from here. It
takes 5 minutes for the command to complete. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.10 |
| cldDot116GHzDTPCSupport This attribute may be used to enable the DTPC support on all
802.11 6GHz radios. DTPC or Dynamic Transmit Power Control support
means that the radio's transmit power will be adver… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.612.1.1.23.12 |
| cldDot116GHzBeaconPeriod This attribute for 6GHz band shall specify the number of TU that
a AP Radio shall use for scheduling Beacon tranmissions.
This value is transmitted in Beacon and Probe Response
fr… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.2 |
| cldDot116GHzDynamicChannelAssignment This attribute for 6GHz band specifies the Dynamic channel assignment
(DCA) which has three modes. When the mode is auto, the channel
assignment will be periodically updated for a… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.3 |
| cldDot116GHzDynamicChannelUpdateInterval When Channel dynamic alogirthm is running, this interval(in
secs) for 6GHz band specifies how often Channel assignement
updates are attempted on an Cisco AP. NOTE: hysteresis is
b… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.4 |
| cldDot116GHzChannelUpdateCmdInvoke This attribute for 6GHz band, when set to activate,
starts a DCA calculation regardless of the dynamic update interval.
This command should be invoke on Group Leader Cisco Switch… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.5 |
| cldDot116GHzChannelUpdateCmdStatus After setting cldDot116GHzChannelUpdateCmdInvoke to
activate, the result of action can be monitored from here. It
takes 5 minutes for the command to complete. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.612.1.1.23.6 |
| cldDot116GHzDynamicTransmitPowerControl This attribute for 6GHz band represents the Dynamic transmit
power(DTP) mode, which is of three types. When the mode is auto,
the transmit power of each Cisco AP will be periodi… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.7 |
| cldDot116GHzCurrentTxPowerLevel This attribute for 6GHz band represents the TxPowerLevel N that is
is currently being used to transmit data. Some PHYs also use this
value to determine the receiver sensitivity r… | scalar | Integer32 | .1.3.6.1.4.1.9.9.612.1.1.23.8 |
| cldDot116GHzPowerUpdateCmdInvoke This attribute for 6GHz band, when set to activate, starts a DTP
calculation regardless of the dynamic update interval. This command
should be invoked on Group Leader Cisco Switc… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.23.9 |