cipslaUdpJitterTmplNTPTolPct
CISCO-IPSLA-JITTER-MIB ·
.1.3.6.1.4.1.9.9.635.1.1.1.22
Object
column
r/w
Unsigned32
This object specifies the total clock synchronization error on source and responder that is considered tolerable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchronization error is sum of NTP offsets on source and responder. The value is expressed as the percentage of actual oneway latency that is measured. This value can be set only for UDP jitter operation with precision of microsecond.
Context
- MIB
- CISCO-IPSLA-JITTER-MIB
- OID
.1.3.6.1.4.1.9.9.635.1.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cipslaUdpJitterTmplEntry
- Table
- cipslaUdpJitterTmplTable
- Siblings
- 28
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipslaUdpJitterTmplName A string which specifies the UDP Jitter template name. | column | OctetString | .1.3.6.1.4.1.9.9.635.1.1.1.1 |
| cipslaUdpJitterTmplInterval This value represents the inter-packet delay between packets
and is in milliseconds. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.10 |
| cipslaUdpJitterTmplNumPkts This value represents the number of packets that need to be
transmitted. | column | packets Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.11 |
| cipslaUdpJitterTmplSrcAddrType An enumerated value which specifies the IP address type
of the source. It must be used along with the
cipslaUdpJitterTmplSrcAddr object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.635.1.1.1.12 |
| cipslaUdpJitterTmplSrcAddr This field specifies the IP address of the source. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.635.1.1.1.13 |
| cipslaUdpJitterTmplSrcPort This object represents the source's port number. If this
object is not specified, the application will get a
port allocated by the system. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.635.1.1.1.14 |
| cipslaUdpJitterTmplPrecision This object specifies the accuracy of jitter statistics in
rttMonJitterStatsTable that needs to be calculated.
milliseconds(1) - The accuracy of stats will be of milliseconds.
mic… | column | Enumeration | .1.3.6.1.4.1.9.9.635.1.1.1.15 |
| cipslaUdpJitterTmplReqDataSize This object represents the number of octets to be
placed into the ARR Data portion of the request
message, when using SNA protocols.
For non-ARR protocols' IP SLA r… | column | octets Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.16 |
| cipslaUdpJitterTmplPktPriority This object specifies the priority that will be assigned
to operation packet.
normal(1) - The packet is of normal priority.
high(2) - The packet is of high priori… | column | Enumeration | .1.3.6.1.4.1.9.9.635.1.1.1.17 |
| cipslaUdpJitterTmplTOS This object represents the type of service octet in an
IP header. | column | Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.18 |
| cipslaUdpJitterTmplVrfName This field is used to specify the VRF name in
which the IP SLA operation will be used. For regular IP SLA
operation this field should not be configured. The agent
will use this fi… | column | OctetString | .1.3.6.1.4.1.9.9.635.1.1.1.19 |
| cipslaUdpJitterTmplDescription A string which provides description of UDP Jitter
template. | column | OctetString | .1.3.6.1.4.1.9.9.635.1.1.1.2 |
| cipslaUdpJitterTmplThreshold This object defines an administrative threshold limit.
If the IP SLA operation time exceeds this limit, then
one threshold crossing occurrence will be counted. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.20 |
| cipslaUdpJitterTmplNTPTolAbs This object specifies the total clock synchronization error
on source and responder that is considered tolerable for
oneway measurement when NTP is used as clock synchronization … | column | microseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.21 |
| cipslaUdpJitterTmplNTPTolType This object specifies whether the value specified for oneway
NTP sync tolerance is absolute value or percent value.
percent(1) - The value for oneway NTP sync tole… | column | Enumeration | .1.3.6.1.4.1.9.9.635.1.1.1.23 |
| cipslaUdpJitterTmplIcpifFactor The advantage factor is dependant on the type of access and
how the service is to be used.
Conventional Wire-line 0
Mobility within Building 5
Mobility within geographic ar… | column | Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.24 |
| cipslaUdpJitterTmplStatsHours The maximum number of hours for which statistics are
maintained. Specifically this is the number of hourly
groups to keep before rolling over.
The value of one is n… | column | hours Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.25 |
| cipslaUdpJitterTmplDistBuckets The maximum number of statistical distribution
buckets to accumulate.
Since this index does not rollover, only the first
cipslaUdpJitterTmplDistBuckets will be kept… | column | Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.26 |
| cipslaUdpJitterTmplDistInterval The statistical distribution buckets interval.
Distribution Bucket Example:
cipslaUdpJitterTmplDistBuckets = 5 buckets
cipslaUdpJitterTmplDistInterva… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.27 |
| cipslaUdpJitterTmplStorageType The storage type of this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.635.1.1.1.28 |
| cipslaUdpJitterTmplControlEnable If this object is enabled, then the IP SLA application
will send control messages to a responder, residing on the
target router to respond to the data request packets being
sent b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.635.1.1.1.3 |
| cipslaUdpJitterTmplRowStatus The status of the conceptual UDP Jitter template control row.
When the status is active, all the read-create objects in that
row can be modified. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.635.1.1.1.30 |
| cipslaUdpJitterTmplTimeOut Specifies the duration to wait for a IP SLA operation
completion.
For connection oriented protocols, this may cause the
connection to be closed by the operation. … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.4 |
| cipslaUdpJitterTmplVerifyData When set to true, the resulting data in each IP SLA
operation is compared with the expected data. This
includes checking header information (if possible) and
exact packet size. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.635.1.1.1.5 |
| cipslaUdpJitterTmplCodecType Specifies the codec type to be used with UDP jitter operation.
If codec-type is configured the following parameters cannot be
configured.
cipslaUdpJitterReqDataSiz… | column | CISCO-IPSLA-TC-MIBIpSlaCodecType | .1.3.6.1.4.1.9.9.635.1.1.1.6 |
| cipslaUdpJitterTmplCodecInterval This field represents the inter-packet delay between
packets and is in milliseconds. This object is applicable
only to UDP jitter operation which uses codec type. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.7 |
| cipslaUdpJitterTmplCodecPayload This object represents the number of octets that needs to be
placed into the Data portion of the message. This value is
used only for UDP jitter operation which uses codec type. | column | octets Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.8 |
| cipslaUdpJitterTmplCodecNumPkts This value represents the number of packets that need to
be transmitted. This value is used only for UDP jitter
operation which uses codec type. | column | packets Unsigned32 | .1.3.6.1.4.1.9.9.635.1.1.1.9 |