CISCO-IPSLA-JITTER-MIB
This MIB module defines templates for IP SLA operations of UDP
Jitter and ICMP Jitter.
The UDP Jitter operation is designed to measure the delay
variance and packet loss in IP networks by generating synthetic
UDP traffic.
The ICMP Jitter operation provides capability to measure metrics
such as RTT (Round Trip Time), jitter, packet loss, one-way
latency by sending ICMP Timestamp stream to the destination
devices.
- Source file
CISCO-IPSLA-JITTER-MIB- Last revised
- Identity
ciscoIpSlaJitterMIB- Base OID
1.3.6.1.4.1.9.9.635
Imported Objects
| CISCO-IPSLA-TC-MIB | IpSlaCodecType |
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IPSLA-JITTER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IPSLA-JITTER-MIB::ciscoIpSlaJitterMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IPSLA-JITTER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IPSLA-JITTER-MIB::ciscoIpSlaJitterMIB'
Objects (55)
Showing 55 of 55 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.635 |
||
.1.3.6.1.4.1.9.9.635.0 |
||
.1.3.6.1.4.1.9.9.635.1 |
||
.1.3.6.1.4.1.9.9.635.1.1 |
||
.1.3.6.1.4.1.9.9.635.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.1.1.1 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.10 |
|
|
packetsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.11 |
|
.1.3.6.1.4.1.9.9.635.1.1.1.12 |
||
.1.3.6.1.4.1.9.9.635.1.1.1.13 |
||
.1.3.6.1.4.1.9.9.635.1.1.1.14 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.635.1.1.1.15 |
|
|
octetsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.16 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.635.1.1.1.17 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.18 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.1.1.19 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.1.1.2 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.20 |
|
|
microsecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.21 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.22 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.635.1.1.1.23 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.24 |
|
|
hoursUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.25 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.26 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.27 |
|
.1.3.6.1.4.1.9.9.635.1.1.1.28 |
||
.1.3.6.1.4.1.9.9.635.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.635.1.1.1.30 |
||
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.4 |
|
.1.3.6.1.4.1.9.9.635.1.1.1.5 |
||
.1.3.6.1.4.1.9.9.635.1.1.1.6 |
||
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.7 |
|
|
octetsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.8 |
|
|
packetsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.1.1.9 |
|
.1.3.6.1.4.1.9.9.635.1.2 |
||
.1.3.6.1.4.1.9.9.635.1.2.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.2.1.1 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.2.1.10 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.11 |
|
|
hoursUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.12 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.13 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.14 |
|
.1.3.6.1.4.1.9.9.635.1.2.1.15 |
||
.1.3.6.1.4.1.9.9.635.1.2.1.16 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.635.1.2.1.2 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.3 |
|
.1.3.6.1.4.1.9.9.635.1.2.1.4 |
||
|
packetsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.5 |
|
|
millisecondsUnsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.6 |
|
.1.3.6.1.4.1.9.9.635.1.2.1.7 |
||
.1.3.6.1.4.1.9.9.635.1.2.1.8 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.635.1.2.1.9 |
|
.1.3.6.1.4.1.9.9.635.2 |
||
.1.3.6.1.4.1.9.9.635.2.1 |
||
.1.3.6.1.4.1.9.9.635.2.2 |
Dependencies (7) 7 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-IPSLA-TC-MIBcisco
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-IPSLA-JITTER-MIBciscoselected
Conformance Groups (2)
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.635.2.1.1The compliance statement for IP SLA
(1) UDP Jitter Template
(2) ICMP Jitter Template
(1) UDP Jitter Template
(2) ICMP Jitter Template
Required groups
| mandatory | ciscoIpSlaUdpJitterTmplGroup | |
| mandatory | ciscoIpSlaIcmpJitterTmplGroup |