CISCO-IPSLA-JITTER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
45
cipslaUdpJitterTmplTable
table.1.3.6.1.4.1.9.9.635.1.1
·
1 row entry
·
29 columns
A table that contains UDP jitter template specific definitions.
A row entry representing an IPSLA UDP jitter template.
Indexes
cipslaUdpJitterTmplName
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cipslaUdpJitterTmplName
A string which specifies the UDP Jitter template name.
|
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.9.9.635.1.1.1.1 |
||||||||||||||
|
cipslaUdpJitterTmplDescription
A string which provides description of UDP Jitter
template. |
OctetStringr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.9.9.635.1.1.1.2 |
||||||||||||||
|
cipslaUdpJitterTmplControlEnable
If this object is enabled, then the IP SLA application
will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.3 |
||||||||||||||
|
cipslaUdpJitterTmplTimeOut
Specifies the duration to wait for a IP SLA operation
completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the… |
millisecondsUnsigned32r/w Constraints: range: 0-604800000 |
.1.3.6.1.4.1.9.9.635.1.1.1.4 |
||||||||||||||
|
cipslaUdpJitterTmplVerifyData
When set to true, the resulting data in each IP SLA
operation is compared with the expected data. This includes checking header information (if possible) and exact packet size. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.5 |
||||||||||||||
|
cipslaUdpJitterTmplCodecType
Specifies the codec type to be used with UDP jitter operation.
If codec-type is configured the following parameters cannot be configured. cipslaUdpJitterReqDataSize cipslaUdpJitterInterval cipslaUdpJitte… |
CISCO-IPSLA-TC-MIBIpSlaCodecTyper/w Textual Convention: CISCO-IPSLA-TC-MIBIpSlaCodecType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.6 |
||||||||||||||
|
cipslaUdpJitterTmplCodecInterval
This field represents the inter-packet delay between
packets and is in milliseconds. This object is applicable only to UDP jitter operation which uses codec type. |
millisecondsUnsigned32r/w Constraints: range: 4-60000 |
.1.3.6.1.4.1.9.9.635.1.1.1.7 |
||||||||||||||
|
cipslaUdpJitterTmplCodecPayload
This object represents the number of octets that needs to be
placed into the Data portion of the message. This value is used only for UDP jitter operation which uses codec type. |
octetsUnsigned32r/w Constraints: range: 0-16384 |
.1.3.6.1.4.1.9.9.635.1.1.1.8 |
||||||||||||||
|
cipslaUdpJitterTmplCodecNumPkts
This value represents the number of packets that need to
be transmitted. This value is used only for UDP jitter operation which uses codec type. |
packetsUnsigned32r/w Constraints: range: 1-60000 |
.1.3.6.1.4.1.9.9.635.1.1.1.9 |
||||||||||||||
|
cipslaUdpJitterTmplInterval
This value represents the inter-packet delay between packets
and is in milliseconds. |
millisecondsUnsigned32r/w Constraints: range: 4-60000 |
.1.3.6.1.4.1.9.9.635.1.1.1.10 |
||||||||||||||
|
cipslaUdpJitterTmplNumPkts
This value represents the number of packets that need to be
transmitted. |
packetsUnsigned32r/w Constraints: range: 1-60000 |
.1.3.6.1.4.1.9.9.635.1.1.1.11 |
||||||||||||||
|
cipslaUdpJitterTmplSrcAddrType
An enumerated value which specifies the IP address type
of the source. It must be used along with the cipslaUdpJitterTmplSrcAddr object. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.12 |
||||||||||||||
|
cipslaUdpJitterTmplSrcAddr
This field specifies the IP address of the source.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.635.1.1.1.13 |
||||||||||||||
|
cipslaUdpJitterTmplSrcPort
This object represents the source's port number. If this
object is not specified, the application will get a port allocated by the system. |
INET-ADDRESS-MIBInetPortNumberr/w Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.9.9.635.1.1.1.14 |
||||||||||||||
|
cipslaUdpJitterTmplPrecision
This object specifies the accuracy of jitter statistics in
rttMonJitterStatsTable that needs to be calculated. milliseconds(1) - The accuracy of stats will be of milliseconds. microseconds(2) - The accuracy of stats wil… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.15 |
||||||||||||||
|
cipslaUdpJitterTmplReqDataSize
This object represents the number of octets to be
placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' IP SLA request/responses, this value represents … |
octetsUnsigned32r/w Constraints: range: 16-65024 |
.1.3.6.1.4.1.9.9.635.1.1.1.16 |
||||||||||||||
|
cipslaUdpJitterTmplPktPriority
This object specifies the priority that will be assigned
to operation packet. normal(1) - The packet is of normal priority. high(2) - The packet is of high priority. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.17 |
||||||||||||||
|
cipslaUdpJitterTmplTOS
This object represents the type of service octet in an
IP header. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.9.9.635.1.1.1.18 |
||||||||||||||
|
cipslaUdpJitterTmplVrfName
This field is used to specify the VRF name in
which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VPN routing table fo… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.9.9.635.1.1.1.19 |
||||||||||||||
|
cipslaUdpJitterTmplThreshold
This object defines an administrative threshold limit.
If the IP SLA operation time exceeds this limit, then one threshold crossing occurrence will be counted. |
millisecondsUnsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.635.1.1.1.20 |
||||||||||||||
|
cipslaUdpJitterTmplNTPTolAbs
This object specifies the total clock synchronization error
on source and responder that is considered tolerable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchroniza… |
microsecondsUnsigned32r/w Constraints: range: 0-100000 |
.1.3.6.1.4.1.9.9.635.1.1.1.21 |
||||||||||||||
|
cipslaUdpJitterTmplNTPTolPct
This object specifies the total clock synchronization error
on source and responder that is considered tolerable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchroniza… |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.9.9.635.1.1.1.22 |
||||||||||||||
|
cipslaUdpJitterTmplNTPTolType
This object specifies whether the value specified for oneway
NTP sync tolerance is absolute value or percent value. percent(1) - The value for oneway NTP sync tolerance is absolute value. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.23 |
||||||||||||||
|
cipslaUdpJitterTmplIcpifFactor
The advantage factor is dependant on the type of access and
how the service is to be used. Conventional Wire-line 0 Mobility within Building 5 Mobility within geographic area 10 Access to hard-to-reach location … |
Unsigned32r/w Constraints: range: 0-20 |
.1.3.6.1.4.1.9.9.635.1.1.1.24 |
||||||||||||||
|
cipslaUdpJitterTmplStatsHours
The maximum number of hours for which statistics are
maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group wi… |
hoursUnsigned32r/w Constraints: range: 0-25 |
.1.3.6.1.4.1.9.9.635.1.1.1.25 |
||||||||||||||
|
cipslaUdpJitterTmplDistBuckets
The maximum number of statistical distribution
buckets to accumulate. Since this index does not rollover, only the first cipslaUdpJitterTmplDistBuckets will be kept. The last bucket will co… |
Unsigned32r/w Constraints: range: 1-20 |
.1.3.6.1.4.1.9.9.635.1.1.1.26 |
||||||||||||||
|
cipslaUdpJitterTmplDistInterval
The statistical distribution buckets interval.
Distribution Bucket Example: cipslaUdpJitterTmplDistBuckets = 5 buckets cipslaUdpJitterTmplDistInterval = 10 milliseconds | Buc… |
millisecondsUnsigned32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.9.9.635.1.1.1.27 |
||||||||||||||
|
cipslaUdpJitterTmplStorageType
The storage type of this conceptual row.
|
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.28 |
||||||||||||||
|
cipslaUdpJitterTmplRowStatus
The status of the conceptual UDP Jitter template control row.
When the status is active, all the read-create objects in that row can be modified. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.1.1.30 |
.1.3.6.1.4.1.9.9.635.1.2
·
1 row entry
·
16 columns
A table that contains ICMP jitter template specific definitions.
A row entry representing an IP SLA ICMP Jitter template.
Indexes
cipslaIcmpJitterTmplName
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cipslaIcmpJitterTmplName
A string which specifies the ICMP jitter template name.
|
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.9.9.635.1.2.1.1 |
||||||||||||||
|
cipslaIcmpJitterTmplDescription
A string which provides description of ICMP Jitter
template. |
OctetStringr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.9.9.635.1.2.1.2 |
||||||||||||||
|
cipslaIcmpJitterTmplTimeOut
Specifies the duration to wait for a IP SLA operation
completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the … |
millisecondsUnsigned32r/w Constraints: range: 0-604800000 |
.1.3.6.1.4.1.9.9.635.1.2.1.3 |
||||||||||||||
|
cipslaIcmpJitterTmplVerifyData
When set to true, the resulting data in each IP SLA
operation is compared with the expected data. This includes checking header information (if possible) and exact packet size. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.2.1.4 |
||||||||||||||
|
cipslaIcmpJitterTmplNumPkts
This value represents the number of packets that need to be
transmitted. |
packetsUnsigned32r/w Constraints: range: 1-60000 |
.1.3.6.1.4.1.9.9.635.1.2.1.5 |
||||||||||||||
|
cipslaIcmpJitterTmplInterval
This value represents the inter-packet delay between packets
and is in milliseconds. |
millisecondsUnsigned32r/w Constraints: range: 4-60000 |
.1.3.6.1.4.1.9.9.635.1.2.1.6 |
||||||||||||||
|
cipslaIcmpJitterTmplSrcAddrType
An enumerated value which specifies the IP address type
of the source. It must be used along with the cipslaIcmpJitterTmplSrcAddr object. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.2.1.7 |
||||||||||||||
|
cipslaIcmpJitterTmplSrcAddr
A string which specifies the IP address of the source.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.635.1.2.1.8 |
||||||||||||||
|
cipslaIcmpJitterTmplTOS
This object represents the type of service octet in an
IP header. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.9.9.635.1.2.1.9 |
||||||||||||||
|
cipslaIcmpJitterTmplVrfName
This field is used to specify the VRF name in
which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VPN routing Table fo… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.9.9.635.1.2.1.10 |
||||||||||||||
|
cipslaIcmpJitterTmplThreshold
This object defines an administrative threshold limit.
If the IP SLA operation time exceeds this limit, then one threshold crossing occurrence will be counted. |
millisecondsUnsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.9.9.635.1.2.1.11 |
||||||||||||||
|
cipslaIcmpJitterTmplStatsHours
The maximum number of hourss for which statistics are
maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group w… |
hoursUnsigned32r/w Constraints: range: 0-25 |
.1.3.6.1.4.1.9.9.635.1.2.1.12 |
||||||||||||||
|
cipslaIcmpJitterTmplDistBuckets
The maximum number of statistical distribution
buckets to accumulate. Since this index does not rollover, only the first cipslaIcmpJitterTmplDistBuckets will be kept. The last bucket will c… |
Unsigned32r/w Constraints: range: 1-20 |
.1.3.6.1.4.1.9.9.635.1.2.1.13 |
||||||||||||||
|
cipslaIcmpJitterTmplDistInterval
The statistical distribution buckets interval.
Distribution Bucket Example: cipslaIcmpJitterTmplDistBuckets = 5 buckets cipslaIcmpJitterTmplDistInterval = 10 milliseconds | B… |
millisecondsUnsigned32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.9.9.635.1.2.1.14 |
||||||||||||||
|
cipslaIcmpJitterTmplStorageType
The storage type of this conceptual row.
|
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.2.1.15 |
||||||||||||||
|
cipslaIcmpJitterTmplRowStatus
The status of the conceptual ICMP jitter template control row.
When the status is active, all the read-create objects in that row can be modified. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.635.1.2.1.16 |