cmplsTeP2mpTunnelBranchInIfIndex

CISCO-IETF-MPLS-TE-P2MP-STD-MIB · .1.3.6.1.4.1.9.10.142.2.4.1.12
Commands MIB view Table view

Object

column IF-MIBInterfaceIndexOrZero 
This is the index of incoming TE link physical I/F for the
P2MP ingress tunnel branch. It is non-zero when the P2MP 
tunnel's incoming branch has been signaled and it is 
applicable only on mid point routers for tunnels having 
out-segment up and running. This object is not part of the 
original draft

Context

MIB
CISCO-IETF-MPLS-TE-P2MP-STD-MIB
OID
.1.3.6.1.4.1.9.10.142.2.4.1.12
Type
column
Access
readonly
Status
current
Parent
cmplsTeP2mpTunnelBranchPerfEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex.<mplsTunnelIndex>.<mplsTunnelInstance>.<mplsTunnelIngressLSRId>.<mplsTunnelEgressLSRId>.<cmplsTeP2mpTunnelBranchPerfBranch>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647

Conformance

Member of
cmplsTeP2mpGeneralGroup cmplsTeP2mpGeneralGroupSup2