Standard view Table view

CISCO-IETF-MPLS-TE-P2MP-STD-MIB

        This MIB module contains managed object definitions
for Point-to-Multipoint (P2MP) MPLS Traffic Engineering (TE)
defined in:
1. Signaling Requirements for Point-to-Multipoint
   Traffic-Engineered MPLS Label Switched Paths (LSPs),
   S. Yasukawa, RFC 4461, April 2006.
2. Extensions to Resource Reservation Protocol - Traffic
   Engineering (RSVP-TE) for Point-to-Multipoint TE Label
   Switched Paths (LSPs), Aggarwal, R., Papadimitriou, D.,
   and Yasukawa, S., RFC 4875, May 2007.
Source file
CISCO-IETF-MPLS-TE-P2MP-STD-MIB
Last revised
Identity
cmplsTeP2mpStdMIB
Base OID
1.3.6.1.4.1.9.10.142
Imported Objects
CISCO-SMI ciscoExperiment
DIFFSERV-MIB IndexInteger IndexIntegerNextFree
IF-MIB InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType
MPLS-LSR-STD-MIB MplsIndexType
MPLS-TC-STD-MIB MplsLabel MplsPathIndexOrZero
MPLS-TE-STD-MIB mplsTunnelEgressLSRId mplsTunnelIndex mplsTunnelIngressLSRId mplsTunnelInstance
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC RowStatus StorageType TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (59)
cmplsTeP2mpStdMIB
.1.3.6.1.4.1.9.10.142
cmplsTeP2mpNotifications
.1.3.6.1.4.1.9.10.142.0
cmplsTeP2mpScalars
.1.3.6.1.4.1.9.10.142.1
cmplsTeP2mpTunnelConfigured
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.10.142.1.1
cmplsTeP2mpTunnelActive
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.10.142.1.2
cmplsTeP2mpTunnelTotalMaxHops
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.10.142.1.3
cmplsTeP2mpObjects
.1.3.6.1.4.1.9.10.142.2
cmplsTeP2mpTunnelTable
.1.3.6.1.4.1.9.10.142.2.1
cmplsTeP2mpTunnelEntry
MPLS-TE-STD-MIBmplsTunnelIndexMPLS-TE-STD-MIBmplsTunnelInstanceMPLS-TE-STD-MIBmplsTunnelIngressLSRIdMPLS-TE-STD-MIBmplsTunnelEgressLSRId
 .1.3.6.1.4.1.9.10.142.2.1.1
cmplsTeP2mpTunnelP2mpIntegrity r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.10.142.2.1.1.2
cmplsTeP2mpTunnelBranchRole r/w
Enumeration
 .1.3.6.1.4.1.9.10.142.2.1.1.3
cmplsTeP2mpTunnelP2mpXcIndex
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.9.10.142.2.1.1.4
cmplsTeP2mpTunnelRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.142.2.1.1.5
cmplsTeP2mpTunnelStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.9.10.142.2.1.1.6
cmplsTeP2mpTunnelSubGroupIDNext
Unsigned32
 .1.3.6.1.4.1.9.10.142.2.2
cmplsTeP2mpTunnelDestTable
.1.3.6.1.4.1.9.10.142.2.3
cmplsTeP2mpTunnelDestEntry
MPLS-TE-STD-MIBmplsTunnelIndexMPLS-TE-STD-MIBmplsTunnelInstanceMPLS-TE-STD-MIBmplsTunnelIngressLSRIdMPLS-TE-STD-MIBmplsTunnelEgressLSRIdcmplsTeP2mpTunnelDestSrcSubGroupOriginTypecmplsTeP2mpTunnelDestSrcSubGroupOrigincmplsTeP2mpTunnelDestSrcSubGroupIDcmplsTeP2mpTunnelDestSubGroupOriginTypecmplsTeP2mpTunnelDestSubGroupOrigincmplsTeP2mpTunnelDestSubGroupIDcmplsTeP2mpTunnelDestDestinationTypecmplsTeP2mpTunnelDestDestination
 .1.3.6.1.4.1.9.10.142.2.3.1
cmplsTeP2mpTunnelDestSrcSubGroupOriginType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.142.2.3.1.1
cmplsTeP2mpTunnelDestHopTableIndex r/w
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.3.1.10
cmplsTeP2mpTunnelDestPathInUse r/w
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.3.1.11
cmplsTeP2mpTunnelDestCHopTableIndex
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.3.1.12
cmplsTeP2mpTunnelDestARHopTableIndex
MPLS-TC-STD-MIBMplsPathIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.3.1.13
cmplsTeP2mpTunnelDestTotalUpTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.9.10.142.2.3.1.14
cmplsTeP2mpTunnelDestInstanceUpTime
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.9.10.142.2.3.1.15
cmplsTeP2mpTunnelDestPathChanges
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.10.142.2.3.1.16
cmplsTeP2mpTunnelDestLastPathChange
SNMPv2-SMITimeTicks
 .1.3.6.1.4.1.9.10.142.2.3.1.17
cmplsTeP2mpTunnelDestCreationTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.10.142.2.3.1.18
cmplsTeP2mpTunnelDestStateTransitions
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.10.142.2.3.1.19
cmplsTeP2mpTunnelDestSrcSubGroupOrigin
OctetString
 .1.3.6.1.4.1.9.10.142.2.3.1.2
cmplsTeP2mpTunnelDestDiscontinuityTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.10.142.2.3.1.20
cmplsTeP2mpTunnelDestAdminStatus r/w
Enumeration
 .1.3.6.1.4.1.9.10.142.2.3.1.21
cmplsTeP2mpTunnelDestOperStatus
Enumeration
 .1.3.6.1.4.1.9.10.142.2.3.1.22
cmplsTeP2mpTunnelDestRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.142.2.3.1.23
cmplsTeP2mpTunnelDestStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.9.10.142.2.3.1.24
cmplsTeP2mpTunnelDestSrcSubGroupID
Unsigned32
 .1.3.6.1.4.1.9.10.142.2.3.1.3
cmplsTeP2mpTunnelDestSubGroupOriginType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.142.2.3.1.4
cmplsTeP2mpTunnelDestSubGroupOrigin
OctetString
 .1.3.6.1.4.1.9.10.142.2.3.1.5
cmplsTeP2mpTunnelDestSubGroupID
Unsigned32
 .1.3.6.1.4.1.9.10.142.2.3.1.6
cmplsTeP2mpTunnelDestDestinationType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.10.142.2.3.1.7
cmplsTeP2mpTunnelDestDestination
OctetString
 .1.3.6.1.4.1.9.10.142.2.3.1.8
cmplsTeP2mpTunnelDestBranchOutSegment
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.9.10.142.2.3.1.9
cmplsTeP2mpTunnelBranchPerfTable
.1.3.6.1.4.1.9.10.142.2.4
cmplsTeP2mpTunnelBranchPerfEntry
MPLS-TE-STD-MIBmplsTunnelIndexMPLS-TE-STD-MIBmplsTunnelInstanceMPLS-TE-STD-MIBmplsTunnelIngressLSRIdMPLS-TE-STD-MIBmplsTunnelEgressLSRIdcmplsTeP2mpTunnelBranchPerfBranch
 .1.3.6.1.4.1.9.10.142.2.4.1
cmplsTeP2mpTunnelBranchPerfBranch
MPLS-LSR-STD-MIBMplsIndexType
 .1.3.6.1.4.1.9.10.142.2.4.1.1
cmplsTeP2mpTunnelBranchOutLabel
MPLS-TC-STD-MIBMplsLabel
 .1.3.6.1.4.1.9.10.142.2.4.1.10
cmplsTeP2mpTunnelBranchSignalArea
OctetString
 .1.3.6.1.4.1.9.10.142.2.4.1.11
cmplsTeP2mpTunnelBranchInIfIndex
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.4.1.12
cmplsTeP2mpTunnelBranchPerfPackets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.10.142.2.4.1.2
cmplsTeP2mpTunnelBranchPerfHCPackets
SNMPv2-SMICounter64
 .1.3.6.1.4.1.9.10.142.2.4.1.3
cmplsTeP2mpTunnelBranchPerfErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.10.142.2.4.1.4
cmplsTeP2mpTunnelBranchPerfBytes
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.10.142.2.4.1.5
cmplsTeP2mpTunnelBranchPerfHCBytes
SNMPv2-SMICounter64
 .1.3.6.1.4.1.9.10.142.2.4.1.6
cmplsTeP2mpTunnelBranchDiscontinuityTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.10.142.2.4.1.7
cmplsTeP2mpTunnelBranchLocalLabel
MPLS-TC-STD-MIBMplsLabel
 .1.3.6.1.4.1.9.10.142.2.4.1.8
cmplsTeP2mpTunnelBranchOutIfIndex
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.4.1.9.10.142.2.4.1.9
cmplsTeP2mpTunnelNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.10.142.2.5
cmplsTeP2mpConformance
.1.3.6.1.4.1.9.10.142.3
cmplsTeP2mpGroups
.1.3.6.1.4.1.9.10.142.3.1
cmplsTeP2mpCompliances
.1.3.6.1.4.1.9.10.142.3.2
Dependencies (16) 10 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. DIFFSERV-DSCP-TCrfc
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. INET-ADDRESS-MIBrfc
  10. INTEGRATED-SERVICES-MIBrfc
  11. DIFFSERV-MIBrfc
  12. IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
  13. MPLS-TC-STD-MIBrfc
  14. MPLS-LSR-STD-MIBrfc
  15. SNMP-FRAMEWORK-MIBrfc
  16. MPLS-TE-STD-MIBrfc
  17. CISCO-IETF-MPLS-TE-P2MP-STD-MIBciscoselected
Conformance Groups (5)
cmplsTeP2mpGeneralGroup
cmplsTeP2mpTunnelConfigured cmplsTeP2mpTunnelActive cmplsTeP2mpTunnelTotalMaxHops cmplsTeP2mpTunnelP2mpIntegrity cmplsTeP2mpTunnelBranchRole cmplsTeP2mpTunnelP2mpXcIndex cmplsTeP2mpTunnelRowStatus cmplsTeP2mpTunnelStorageType cmplsTeP2mpTunnelSubGroupIDNext cmplsTeP2mpTunnelDestBranchOutSegment cmplsTeP2mpTunnelDestHopTableIndex cmplsTeP2mpTunnelDestPathInUse cmplsTeP2mpTunnelDestCHopTableIndex cmplsTeP2mpTunnelDestARHopTableIndex cmplsTeP2mpTunnelDestTotalUpTime cmplsTeP2mpTunnelDestInstanceUpTime cmplsTeP2mpTunnelDestPathChanges cmplsTeP2mpTunnelDestLastPathChange cmplsTeP2mpTunnelDestCreationTime cmplsTeP2mpTunnelDestStateTransitions cmplsTeP2mpTunnelDestDiscontinuityTime cmplsTeP2mpTunnelDestAdminStatus cmplsTeP2mpTunnelDestOperStatus cmplsTeP2mpTunnelDestRowStatus cmplsTeP2mpTunnelDestStorageType cmplsTeP2mpTunnelBranchPerfPackets cmplsTeP2mpTunnelBranchPerfHCPackets cmplsTeP2mpTunnelBranchPerfErrors cmplsTeP2mpTunnelBranchPerfBytes cmplsTeP2mpTunnelBranchPerfHCBytes cmplsTeP2mpTunnelBranchDiscontinuityTime cmplsTeP2mpTunnelBranchLocalLabel cmplsTeP2mpTunnelBranchOutIfIndex cmplsTeP2mpTunnelBranchOutLabel cmplsTeP2mpTunnelBranchSignalArea cmplsTeP2mpTunnelBranchInIfIndex cmplsTeP2mpTunnelNotificationEnable
Collection of objects needed for MPLS P2MP.
 .1.3.6.1.4.1.9.10.142.3.1.1
cmplsTeP2mpNotifGroup
cmplsTeP2mpTunnelDestUp cmplsTeP2mpTunnelDestDown
Notifications implemented in this module.
 .1.3.6.1.4.1.9.10.142.3.1.2
cmplsTeP2mpScalarGroup
cmplsTeP2mpTunnelConfigured cmplsTeP2mpTunnelActive cmplsTeP2mpTunnelTotalMaxHops
Scalar objects needed to implement P2MP MPLS tunnels.
 .1.3.6.1.4.1.9.10.142.3.1.3
cmplsTeP2mpGeneralGroupSup1
cmplsTeP2mpTunnelBranchLocalLabel cmplsTeP2mpTunnelBranchOutIfIndex cmplsTeP2mpTunnelBranchOutLabel cmplsTeP2mpTunnelBranchSignalArea
Addition to collection of objects needed for MPLS P2MP.
 .1.3.6.1.4.1.9.10.142.3.1.4
cmplsTeP2mpGeneralGroupSup2
cmplsTeP2mpTunnelBranchInIfIndex
Addition to collection of objects needed for MPLS P2MP.
 .1.3.6.1.4.1.9.10.142.3.1.5
Compliance Statements (6)

OID .1.3.6.1.4.1.9.10.142.3.2.1
Compliance statement for agents that provide full support
for MPLS-TE-P2MP-STD-MIB. Such devices can be monitored and
also be configured using this MIB module.
The Module is implemented with support for read-create and
read-write. In other words, both monitoring and
configuration are available when using this
MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpNotifGroup
mandatory cmplsTeP2mpScalarGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not
required.

OID .1.3.6.1.4.1.9.10.142.3.2.2
Compliance statement for agents that provide read-only
support for MPLS-TE-P2MP-STD-MIB. Such devices can only be
monitored using this MIB module.
The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing
this MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpScalarGroup
mandatory cmplsTeP2mpNotifGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelP2mpIntegrity readonly
Write access is not required.
cmplsTeP2mpTunnelBranchRole readonly
Write access is not required.
cmplsTeP2mpTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelStorageType readonly
Write access is not required.
cmplsTeP2mpTunnelDestHopTableIndex readonly
Write access is not required.
cmplsTeP2mpTunnelDestPathInUse readonly
Write access is not required.
cmplsTeP2mpTunnelDestAdminStatus readonly
Write access is not required.
cmplsTeP2mpTunnelDestRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelDestStorageType readonly
Write access is not required.

OID .1.3.6.1.4.1.9.10.142.3.2.3
Compliance statement for agents that provide full support
for MPLS-TE-P2MP-STD-MIB. Such devices can be monitored and
also be configured using this MIB module.
The Module is implemented with support for read-create and
read-write. In other words, both monitoring and
configuration are available when using this
MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpGeneralGroupSup1
mandatory cmplsTeP2mpNotifGroup
mandatory cmplsTeP2mpScalarGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not
required.

OID .1.3.6.1.4.1.9.10.142.3.2.4
Compliance statement for agents that provide read-only
support for MPLS-TE-P2MP-STD-MIB. Such devices can only be
monitored using this MIB module.
The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing
this MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpGeneralGroupSup1
mandatory cmplsTeP2mpScalarGroup
mandatory cmplsTeP2mpNotifGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelP2mpIntegrity readonly
Write access is not required.
cmplsTeP2mpTunnelBranchRole readonly
Write access is not required.
cmplsTeP2mpTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelStorageType readonly
Write access is not required.
cmplsTeP2mpTunnelDestHopTableIndex readonly
Write access is not required.
cmplsTeP2mpTunnelDestPathInUse readonly
Write access is not required.
cmplsTeP2mpTunnelDestAdminStatus readonly
Write access is not required.
cmplsTeP2mpTunnelDestRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelDestStorageType readonly
Write access is not required.

OID .1.3.6.1.4.1.9.10.142.3.2.5
Compliance statement for agents that provide full support
for MPLS-TE-P2MP-STD-MIB. Such devices can be monitored and
also be configured using this MIB module.
The Module is implemented with support for read-create and
read-write. In other words, both monitoring and
configuration are available when using this
MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpGeneralGroupSup1
mandatory cmplsTeP2mpGeneralGroupSup2
mandatory cmplsTeP2mpNotifGroup
mandatory cmplsTeP2mpScalarGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not
required.

OID .1.3.6.1.4.1.9.10.142.3.2.6
Compliance statement for agents that provide read-only
support for MPLS-TE-P2MP-STD-MIB. Such devices can only be
monitored using this MIB module.
The Module is implemented with support for read-only. In
other words, only monitoring is available by implementing
this MODULE-COMPLIANCE.
Required groups
mandatory cmplsTeP2mpGeneralGroup
mandatory cmplsTeP2mpGeneralGroupSup1
mandatory cmplsTeP2mpGeneralGroupSup2
mandatory cmplsTeP2mpScalarGroup
mandatory cmplsTeP2mpNotifGroup
Object refinements
ObjectAccessSyntaxDescription
cmplsTeP2mpTunnelP2mpIntegrity readonly
Write access is not required.
cmplsTeP2mpTunnelBranchRole readonly
Write access is not required.
cmplsTeP2mpTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelStorageType readonly
Write access is not required.
cmplsTeP2mpTunnelDestHopTableIndex readonly
Write access is not required.
cmplsTeP2mpTunnelDestPathInUse readonly
Write access is not required.
cmplsTeP2mpTunnelDestAdminStatus readonly
Write access is not required.
cmplsTeP2mpTunnelDestRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active(1) is the
only status that needs to be supported.
cmplsTeP2mpTunnelDestStorageType readonly
Write access is not required.
Notifications / Traps (2)
NameOIDDescription
cmplsTeP2mpTunnelDestUp
cmplsTeP2mpTunnelDestAdminStatus cmplsTeP2mpTunnelDestOperStatus
.1.3.6.1.4.1.9.10.142.0.1
This notification is generated when a
cmplsTeP2mpTunnelDestOperStatus object for one of the
destinations of one of the configured tunnels is about to
leave the down(2) state and transition into some other
state. This other state is indicated by the included value
of cmplsTeP2mpTunnelDestOperStatus.

This reporting of state transitions mirrors mplsTunnelUp.
cmplsTeP2mpTunnelDestDown
cmplsTeP2mpTunnelDestAdminStatus cmplsTeP2mpTunnelDestOperStatus
.1.3.6.1.4.1.9.10.142.0.2
This notification is generated when a
cmplsTeP2mpTunnelDestOperStatus object for one of the
destinations of one of the configured tunnels is about to
enter the down(2) state from some other state. This other
state is indicated by the included value of
cmplsTeP2mpTunnelDestOperStatus.

This reporting of state transitions mirrors mplsTunnelDown.