CISCO-IETF-MPLS-TE-P2MP-STD-MIB Table View

The cmplsTeP2mpTunnelTable allows new P2MP MPLS tunnels to be
created between an LSR and one or more remote end-points,
and existing P2MP tunnels to be reconfigured or removed.
          
This table sparse augments mplsTunnelTable in
MPLS-TE-STD-MIB such that entries in that table can be
flagged as point-to-multipoint, and can be configured and
monitored appropriately.

cmplsTeP2mpTunnelEntry row .1.3.6.1.4.1.9.10.142.2.1.1

An entry in this table represents a P2MP MPLS tunnel.
An entry can be created by a network administrator or by an
SNMP agent as instructed by an MPLS signaling protocol.

An entry in this table MUST correspo…

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId

Column	Syntax	OID
cmplsTeP2mpTunnelP2mpIntegrity Denotes whether or not P2MP Integrity is required for this tunnel. If P2MP integrity is operational on a P2MP tunnel then the failure of the path to any of the tunnel destinations should cause the teardow…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.142.2.1.1.2
cmplsTeP2mpTunnelBranchRole This value supplements the value in the object mplsTunnelRole in MPLS-TE-STD-MIB that indicates the role of this LSR in the tunnel represented by this entry in cmplsTeP2mpTunnelTable. mplsTunnelRole may t…	Enumerationr/w Enumerated Values: 1 notBranch 2 branch 3 bud	.1.3.6.1.4.1.9.10.142.2.1.1.3
cmplsTeP2mpTunnelP2mpXcIndex This object contains the value of mplsXCIndex, the primary index of the mplsXCTable for all cross-connect entries for this P2MP LSP. If no XC entries have been created yet, this object must return zero. …	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.9.10.142.2.1.1.4
cmplsTeP2mpTunnelRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except cmplsTeP2mpTunnelRowStatus and cmpl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.142.2.1.1.5
cmplsTeP2mpTunnelStorageType The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.142.2.1.1.6

The cmplsTeP2mpTunnelDestTable allows new destinations of
P2MP MPLS tunnels to be added to and removed from P2MP
tunnels.

cmplsTeP2mpTunnelDestEntry row .1.3.6.1.4.1.9.10.142.2.3.1

An entry in this table represents a destination of a P2MP
MPLS tunnel. An entry can be created by a network
administrator or by an SNMP agent as instructed by an MPLS
signaling protocol.

Entries in this tab…

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId cmplsTeP2mpTunnelDestSrcSubGroupOriginType cmplsTeP2mpTunnelDestSrcSubGroupOrigin cmplsTeP2mpTunnelDestSrcSubGroupID cmplsTeP2mpTunnelDestSubGroupOriginType cmplsTeP2mpTunnelDestSubGroupOrigin cmplsTeP2mpTunnelDestSubGroupID cmplsTeP2mpTunnelDestDestinationType cmplsTeP2mpTunnelDestDestination

Column	Syntax	OID
cmplsTeP2mpTunnelDestSrcSubGroupOriginType This object identifies the type of address carried in cmplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object cmplsTeP2mpTunnelDestSrcSubGroupOrigin must conform to the protocol specification, this objec…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.142.2.3.1.1
cmplsTeP2mpTunnelDestSrcSubGroupOrigin The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a transit or egress LSR. This object is interpreted in the context of cmplsTeP2m…	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.142.2.3.1.2
cmplsTeP2mpTunnelDestSrcSubGroupID The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on ou…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.142.2.3.1.3
cmplsTeP2mpTunnelDestSubGroupOriginType This object identifies the type of address carried in cmplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1) or ipv6(2) in keeping with the protocol specification.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.142.2.3.1.4
cmplsTeP2mpTunnelDestSubGroupOrigin The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingress LSR of the P2MP tunnel and will be the received signaled value as available in cmplsTeP…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.142.2.3.1.5
cmplsTeP2mpTunnelDestSubGroupID The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this object during row creation when the sub-group origin in cmplsTeP2mpTunnelDe…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.142.2.3.1.6
cmplsTeP2mpTunnelDestDestinationType This object identifies the type of address carried in cmplsTeP2mpTunnelDestDestination. This object forms part of the index of this table and can, therefore, not return the value unknown(0). Similarly, si…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.142.2.3.1.7
cmplsTeP2mpTunnelDestDestination A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the leaf, but can be any interface address. When a signaling protocol is used, th…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.9.10.142.2.3.1.8
cmplsTeP2mpTunnelDestBranchOutSegment This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel. If MPLS-LSR-STD-MIB is imp…	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.9.10.142.2.3.1.9
cmplsTeP2mpTunnelDestHopTableIndex Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This object represents the configured route for the branch of the P2MP tree to this …	MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.10
cmplsTeP2mpTunnelDestPathInUse This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value reflects the secondary index into mplsTunnelHopTable where the primary index comes from cmp…	MPLS-TC-STD-MIBMplsPathIndexOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.11
cmplsTeP2mpTunnelDestCHopTableIndex Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based on the chosen configured path identified by cmplsTeP2mpTunnelDestHopTableIn…	MPLS-TC-STD-MIBMplsPathIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.12
cmplsTeP2mpTunnelDestARHopTableIndex Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If …	MPLS-TC-STD-MIBMplsPathIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.13
cmplsTeP2mpTunnelDestTotalUpTime This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is available. If this information is not available, this object MUST return a value of…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.14
cmplsTeP2mpTunnelDestInstanceUpTime This value identifies the total time that the currently active tunnel instance to this destination has had its operational status (mplsTeP2mpTunnelDestOperStatus) set to up(1) since it was last previously not up(1).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.15
cmplsTeP2mpTunnelDestPathChanges This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object should be read in conjunction with cmplsTeP2mpTunnelDestDiscontinuityTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.16
cmplsTeP2mpTunnelDestLastPathChange Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.17
cmplsTeP2mpTunnelDestCreationTime Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when the value of cmplsTeP2mpTunnelDestOperStatus was first set to up(1).	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.142.2.3.1.18
cmplsTeP2mpTunnelDestStateTransitions This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination has changed. This object should be read in conjunction with cmplsTeP2mpTunnelDestDiscontinui…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.3.1.19
cmplsTeP2mpTunnelDestDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the loca…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.142.2.3.1.20
cmplsTeP2mpTunnelDestAdminStatus Indicates the desired operational status of this destination of this P2MP tunnel.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.10.142.2.3.1.21
cmplsTeP2mpTunnelDestOperStatus Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperStatus that includes two other values: dormant(5) -- some component is missing notPres…	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown 7 lowerLayerDown	.1.3.6.1.4.1.9.10.142.2.3.1.22
cmplsTeP2mpTunnelDestRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by SET operations except cmplsTeP2mpTunnelDestAdminStatus …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.142.2.3.1.23
cmplsTeP2mpTunnelDestStorageType The storage type for this table entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.142.2.3.1.24

This table provides per-tunnel branch MPLS performance
information.
          
This table is not valid for switching types other than
packet.

cmplsTeP2mpTunnelBranchPerfEntry row .1.3.6.1.4.1.9.10.142.2.4.1

An entry in this table is created by the LSR for each
downstream branch (out-segment) from this LSR for this P2MP
tunnel.

More than one destination as represented by an entry in the
cmplsTeP2mpTunnelDestTab…

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId cmplsTeP2mpTunnelBranchPerfBranch

Column	Syntax	OID
cmplsTeP2mpTunnelBranchPerfBranch This object identifies an outgoing branch from this LSR for this tunnel. Its value is unique within the context of the tunnel. If MPLS-LSR-STD-MIB is implemented, this object should contain an index into …	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.9.10.142.2.4.1.1
cmplsTeP2mpTunnelBranchPerfPackets Number of packets forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both cmplsTeP2mpTunnelBranchPerfHCPackets is returned. This…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.4.1.2
cmplsTeP2mpTunnelBranchPerfHCPackets High capacity counter for number of packets forwarded by the tunnel onto this branch. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityTime.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.142.2.4.1.3
cmplsTeP2mpTunnelBranchPerfErrors Number of packets dropped because of errors or for other reasons, that were supposed to be forwarded onto this branch for this tunnel. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityT…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.4.1.4
cmplsTeP2mpTunnelBranchPerfBytes Number of bytes forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both cmplsTeP2mpTunnelBranchPerfHCBytes is returned. This obj…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.4.1.5
cmplsTeP2mpTunnelBranchPerfHCBytes High capacity counter for number of bytes forwarded by the tunnel onto this branch. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityTime.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.142.2.4.1.6
cmplsTeP2mpTunnelBranchDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initializatio…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.142.2.4.1.7
cmplsTeP2mpTunnelBranchLocalLabel The local MPLS label for this branch. This object is not part of the original draft	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.4.1.8
cmplsTeP2mpTunnelBranchOutIfIndex This is the index of outgoing TE link physical I/F for the P2MP egress tunnel branch. It is non-zero when the P2MP tunnel's outgoing branch has been signaled. This object is not part of the original draft	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.142.2.4.1.9
cmplsTeP2mpTunnelBranchOutLabel The outgoing MPLS label for this branch.	MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.142.2.4.1.10
cmplsTeP2mpTunnelBranchSignalArea This is the IGP area instance name/number that the outgoing tunnel branch is signaled in. TE can allow (currently not supported for P2MP tunnels but could be in the future) the operator to restrict path computation to…	OctetString	.1.3.6.1.4.1.9.10.142.2.4.1.11
cmplsTeP2mpTunnelBranchInIfIndex This is the index of incoming TE link physical I/F for the P2MP ingress tunnel branch. It is non-zero when the P2MP tunnel's incoming branch has been signaled and it is applicable only on mid point routers for tunnels…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.142.2.4.1.12