ciscoAtmIfIlmiConfiguration
CISCO-ATM-IF-MIB ·
.1.3.6.1.4.1.9.10.14.1.1.1.16
Object
column
r/w
Enumeration
Enable/Disable ILMI configuration on this interface. The configuration takes effect only on the next interface restart. Disabling this object will also disable atmIfIlmiAddressRegistration and atmIfIlmiAutoConfiguration and atmIfIlmiKeepAlive
Context
- MIB
- CISCO-ATM-IF-MIB
- OID
.1.3.6.1.4.1.9.10.14.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ciscoAtmIfEntry
- Table
- ciscoAtmIfTable
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoAtmIfType The type of ATM interface which is either a UNI
(User to Network), PNNI, IISP or NNI PVC only.
To modify the ciscoAtmIftype, ifAdminStatus has
to be down and atmIfIlmiAutoConfig… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.1 |
| ciscoAtmIfPortType The type of physical layer medium on the port. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.10 |
| ciscoAtmIfXmitLed The transmit LED color of this port. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.11 |
| ciscoAtmIfRecvLed The receive LED color of this port. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.12 |
| ciscoAtmIfXmitCells The number of cells transmitted of this interface,
including p2p and p2mp cells. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.13 |
| ciscoAtmIfRecvCells The number of cells received of this interface,
including p2p and p2mp cells. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.14 |
| ciscoAtmIfSvcMinVci deprecated The minimum of the range of values from which VCI's
are assigned to new SVC connections. By this value
being larger, more VCI's are reserved for setting up
PVCs. This applies to … | column | Integer32 | .1.3.6.1.4.1.9.10.14.1.1.1.15 |
| ciscoAtmIfIlmiAddressRegistration Enable/Disable ILMI Address Registration on on
this interface. The configuration takes effect only
on the next interface restart. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.17 |
| ciscoAtmIfIlmiAutoConfiguration Enable/Disable ILMI link and interface type
determination. The configuration takes effect only on
the next interface restart. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.18 |
| ciscoAtmIfIlmiKeepAlive The amount of time that should elapse between
successive ILMI keepalive messages sent on this
interface. A value of 0 disables ILMI keepalive messages
on this interface. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.14.1.1.1.19 |
| ciscoAtmIfSide The side of ATM interface which is either a user or
network side.NotApplicable value implies that
ciscoAtmIftype is other than uni or iisp. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.2 |
| ciscoAtmIfSoftVcDestAddress The 20 byte ATM address of the destination ATM
interface for soft ATM PVC/PVP | column | NsapAtmAddr | .1.3.6.1.4.1.9.10.14.1.1.1.20 |
| ciscoAtmIfUniSignallingVersion The version of UNI signalling that is currently
being used on the interface. The appropriate
value, either atmfUni3Dot0, atmfUni3Dot1 or
atmfUni4Dot0, is used when the interfac… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.21 |
| ciscoAtmIfSvcUpcIntent deprecated Determines the policing (Usage Parameter Control or UPC)
action to take for SVCs established through this
interface. Values other than passing are allowed only if
policing is s… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.22 |
| ciscoAtmIfAddressType obsolete An indication of the type of the ATM
addresses on this interface. To configure a new
atm address, set ciscoAtmIfAddress to the
address, then set this object to ether nsap(1),
or … | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.23 |
| ciscoAtmIfAddress obsolete The ATM address of this interface, which
can be either nsap, esi or e164.
For the switch, the nsap/esi address can only
exist on the cpu port. | column | OctetString | .1.3.6.1.4.1.9.10.14.1.1.1.24 |
| ciscoAtmIfUniType The type of User to Network interface is either
private or public. If ciscoAtmIfType is not uni
then ciscoAtmIfUniType value should be ignored. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.3 |
| ciscoAtmIfWellKnownVcMode Indicates whether well-known VCs should be
automatically or manually created for the
interface.
In automatic(1) mode, well-known VCs will be
created with default… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.31 |
| ciscoAtmIfSignallingAdminStatus Enable/Disable signalling/sscop on this interface.The
disabled(2) action causes all the active SVCs on
this interface to be cleared. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.32 |
| ciscoAtmIfCdLed The Cd LED color of this port. | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.33 |
| ciscoAtmIfIlmiAccessFilter The access filter which allows or denies certain
ILMI registered addresses on this interface when
ciscoAtmIfIlmiAddressRegistration is set to enable(1).
permitAll - This permits… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.34 |
| ciscoAtmIfConfigAESA The ATM End System Address (AESA) of this interface
can be configured by entering the full 20 octet AESA,
or the 6 octet ESI and 1 octet Selector Byte.
If the ESI and Selector B… | column | OctetString | .1.3.6.1.4.1.9.10.14.1.1.1.35 |
| ciscoAtmIfDerivedAESA The ATM End System Address (AESA) of this interface.
The AESA is configured using ciscoAtmIfConfigAESA
or can be automatically generated.
A length of zero indicates that no AESA i… | column | AtmAddr | .1.3.6.1.4.1.9.10.14.1.1.1.36 |
| ciscoAtmIfE164Address The ATM E164 address of this interface.
When a native E.164 number is configured for this
inteface, only native E.164 numbers are
transmitted/received as the called/calling part… | column | AtmAddr | .1.3.6.1.4.1.9.10.14.1.1.1.37 |
| ciscoAtmIfE164AutoConversionOnly Enable/Disable E164 auto conversion only on this
interface.
The E164 auto-conversion allows for algorithmic
translation between the native E164 number and E164
AESA address form… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.14.1.1.1.38 |
| ciscoAtmIfRxCellUpcViolations The total number of nonconforming cells detected by
Usage Parameter Control (UPC) for cells received on
this interface. This object is not instantiated on
systems that do not ha… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.39 |
| ciscoAtmIfPVPs The number of permanent virtual paths at this
interface. | column | Integer32 | .1.3.6.1.4.1.9.10.14.1.1.1.4 |
| ciscoAtmIfRxCellDiscards The total number of cells that were discarded
within the switch. The cells can be discarded
due to non conformance detected by Usage Parameter
Control (UPC) or queue overflows wi… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.40 |
| ciscoAtmIfIlmiFSMState The ILMI states meaningful when the value of
ciscoAtmIfIlmiConfiguration indicates that the ILMI
is enabled for an ATM interface:
down -- Stopped or just booted or… | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.41 |
| ciscoAtmIfIlmiUpDownChanges The number of times ILMI enters and leaves
the state of upAndNormal. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.42 |
| ciscoAtmIfSscopFSMState The SSCOP state for an ATM interface as
defined by the ITU-T. The state is idle
when the interface is down or SSCOP is
not enabled on the ATM interface | column | Enumeration | .1.3.6.1.4.1.9.10.14.1.1.1.43 |
| ciscoAtmIfSscopUpDownChanges The number of times SSCOP enters and leaves
the state of DataTransferReady. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.14.1.1.1.44 |
| ciscoAtmIfSvcUpcIntentCbr Determines the policing (Usage Parameter Control or UPC)
action to take for Constant Bit Rate SVCs established
through this interface. Values other than passing are
allowed only… | column | UpcMethod | .1.3.6.1.4.1.9.10.14.1.1.1.45 |
| ciscoAtmIfSvcUpcIntentVbrRt Determines the policing (Usage Parameter Control or UPC)
action to take for Variable Bit Rate - Real Time SVCs
established through this interface. Values other than
passing are … | column | UpcMethod | .1.3.6.1.4.1.9.10.14.1.1.1.46 |
| ciscoAtmIfSvcUpcIntentVbrNrt Determines the policing (Usage Parameter Control or UPC)
action to take for Variable Bit Rate - Non Real Time SVCs
established through this interface. Values other than
passing … | column | UpcMethod | .1.3.6.1.4.1.9.10.14.1.1.1.47 |
| ciscoAtmIfSvcUpcIntentAbr Determines the policing (Usage Parameter Control or UPC)
action to take for Available Bit Rate SVCs established
through this interface. Values other than passing are
allowed onl… | column | UpcMethod | .1.3.6.1.4.1.9.10.14.1.1.1.48 |
| ciscoAtmIfSvcUpcIntentUbr Determines the policing (Usage Parameter Control or UPC)
action to take for Unspecified Bit Rate SVCs established
through this interface. Values other than passing are
allowed o… | column | UpcMethod | .1.3.6.1.4.1.9.10.14.1.1.1.49 |
| ciscoAtmIfPVCs The number of permanent virtual channels at this
interface. | column | Integer32 | .1.3.6.1.4.1.9.10.14.1.1.1.5 |
| ciscoAtmIfActiveSVPs The number of active switched virtual paths at
this interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.14.1.1.1.6 |
| ciscoAtmIfActiveSVCs The number of active switched virtual channels at
this interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.14.1.1.1.7 |
| ciscoAtmIfTotalConnections The total number of existing connections at
this interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.14.1.1.1.8 |
| ciscoAtmIfConfVplIf The number of configured VP interfaces at this physical
interface. | column | Integer32 | .1.3.6.1.4.1.9.10.14.1.1.1.9 |