CISCO-ATM-IF-MIB

        A MIB module for an ATM interface configuration.
    
Source file
CISCO-ATM-IF-MIB
Last revised
Identity
ciscoAtmIfMIB
Base OID
1.3.6.1.4.1.9.10.14
Imported Objects
ATM-MIB atmInterfaceConfEntry
CISCO-SMI ciscoExperiment
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ATM-IF-MIB::ciscoAtmIfMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-IF-MIB::ciscoAtmIfMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (53)
.1.3.6.1.4.1.9.10.14
.1.3.6.1.4.1.9.10.14.0
.1.3.6.1.4.1.9.10.14.1
.1.3.6.1.4.1.9.10.14.1.1
.1.3.6.1.4.1.9.10.14.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.10
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.11
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.12
.1.3.6.1.4.1.9.10.14.1.1.1.13
.1.3.6.1.4.1.9.10.14.1.1.1.14
ciscoAtmIfSvcMinVci deprecated
Integer32
.1.3.6.1.4.1.9.10.14.1.1.1.15
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.16
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.17
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.18
secondsInteger32
.1.3.6.1.4.1.9.10.14.1.1.1.19
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.2
.1.3.6.1.4.1.9.10.14.1.1.1.20
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.21
ciscoAtmIfSvcUpcIntent deprecated r/w
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.22
ciscoAtmIfAddressType obsolete r/w
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.23
ciscoAtmIfAddress obsolete r/w
OctetString
.1.3.6.1.4.1.9.10.14.1.1.1.24
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.3
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.31
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.32
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.33
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.34
OctetString
.1.3.6.1.4.1.9.10.14.1.1.1.35
.1.3.6.1.4.1.9.10.14.1.1.1.36
.1.3.6.1.4.1.9.10.14.1.1.1.37
.1.3.6.1.4.1.9.10.14.1.1.1.38
.1.3.6.1.4.1.9.10.14.1.1.1.39
Integer32
.1.3.6.1.4.1.9.10.14.1.1.1.4
.1.3.6.1.4.1.9.10.14.1.1.1.40
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.41
.1.3.6.1.4.1.9.10.14.1.1.1.42
Enumeration
.1.3.6.1.4.1.9.10.14.1.1.1.43
.1.3.6.1.4.1.9.10.14.1.1.1.44
.1.3.6.1.4.1.9.10.14.1.1.1.45
.1.3.6.1.4.1.9.10.14.1.1.1.46
.1.3.6.1.4.1.9.10.14.1.1.1.47
.1.3.6.1.4.1.9.10.14.1.1.1.48
.1.3.6.1.4.1.9.10.14.1.1.1.49
Integer32
.1.3.6.1.4.1.9.10.14.1.1.1.5
.1.3.6.1.4.1.9.10.14.1.1.1.6
.1.3.6.1.4.1.9.10.14.1.1.1.7
.1.3.6.1.4.1.9.10.14.1.1.1.8
Integer32
.1.3.6.1.4.1.9.10.14.1.1.1.9
Enumeration
.1.3.6.1.4.1.9.10.14.1.2
.1.3.6.1.4.1.9.10.14.1.3
.1.3.6.1.4.1.9.10.14.3
.1.3.6.1.4.1.9.10.14.3.1
.1.3.6.1.4.1.9.10.14.3.2
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ATM-TC-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. ATM-MIBrfc
  9. CISCO-SMIcisco
  10. CISCO-ATM-IF-MIBciscoselected
Type Definitions (3)
OctetString range: 0range: 8range: 13range: 20
OctetString range: 20
Enumeration
passing(1)
tagging(2)
dropping(3)
Conformance Groups (11)
A collection of objects providing the information
about ATM interface related information also an
ability to configure certain parameters of
ATM interface.
.1.3.6.1.4.1.9.10.14.3.2.1
Additional collection of objects providing
ATM interface related information.
.1.3.6.1.4.1.9.10.14.3.2.2
Additional collection of objects providing ATM
interface related information.
.1.3.6.1.4.1.9.10.14.3.2.3
Additional collection of objects providing ATM
switch and interface related information on Access
Filter for ILMI Address Registration.
.1.3.6.1.4.1.9.10.14.3.2.4
Additional collection of objects providing ATM
switch and interface related information for ATM Addresses.
.1.3.6.1.4.1.9.10.14.3.2.5
Additional collection of objects providing ATM
interface related information.
.1.3.6.1.4.1.9.10.14.3.2.6
Additional collection of objects providing ATM switch
interface Resource Manager, ILMI and Signalling related
information.
.1.3.6.1.4.1.9.10.14.3.2.7
Additional collection of objects providing
ATM interface related information.
.1.3.6.1.4.1.9.10.14.3.2.8
A collection of objects providing the information
about ATM interface related information also an
ability to configure certain parameters of
ATM interface.
.1.3.6.1.4.1.9.10.14.3.2.9
Additional objects providing means to enable/disable
notifications related to the interface ILMI and
SSCOP state
.1.3.6.1.4.1.9.10.14.3.2.10
Interface ILMI and SSCOP FSM notifications
.1.3.6.1.4.1.9.10.14.3.2.11
Compliance Statements (8)

OID .1.3.6.1.4.1.9.10.14.3.1.1
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.2
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.3
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.4
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.5
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.6
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.7
The compliance statement for the Cisco ATM
interface group.
Required groups

OID .1.3.6.1.4.1.9.10.14.3.1.8
The compliance statement for the Cisco ATM
interface group.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.9.10.14.0.1
This notification is generated when ever ILMI or SSCOP
FSM state changes