ciscoAtmVclCrossVpi
CISCO-ATM-CONN-MIB ·
.1.3.6.1.4.1.9.10.13.1.2.1.1.16
Object
column
r/w
Integer32
This specifies the VPI value of the VCL to which this VCL is cross-connected. For point to multi-point connection, this is the root VCL's VPI for the leaf entry. Similarly it is the 1st leaf's VPI value for the root entry.
Context
- MIB
- CISCO-ATM-CONN-MIB
- OID
.1.3.6.1.4.1.9.10.13.1.2.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ciscoAtmVclEntry
- Table
- ciscoAtmVclTable
- Siblings
- 54
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoAtmVclCastType Vcl type is either a point to point connection or point
to multipoint root or leaf. | column | CastType | .1.3.6.1.4.1.9.10.13.1.2.1.1.1 |
| ciscoAtmVclOamAisEnable Enable Alarm Indication Signal OAM cell generation
if the interafce goes down on a crossconnect virtual
channel. | column | EnableStatus | .1.3.6.1.4.1.9.10.13.1.2.1.1.10 |
| ciscoAtmVclOamRdiEnable Enable Remote Defect Indication OAM cell generation
if an Alarm Indication Signal OAM cell is received. | column | EnableStatus | .1.3.6.1.4.1.9.10.13.1.2.1.1.11 |
| ciscoAtmVclInstallTime The time stamp derived from sysUpTime when this VCL gets
created. The VCL entries are created/deleted as a by-product
of creating and deleting entries in the atmVclTable defined… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.13.1.2.1.1.12 |
| ciscoAtmVclInCells The total number of cells received on
this VCL. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.13 |
| ciscoAtmVclOutCells The total number of cells transmitted on
this VCL. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.14 |
| ciscoAtmVclCrossIfIndex For point to point, this is the cross-connected VCL's
ifIndex of this VCL. For point to multi-point connection,
this will be the root VCL's ifIndex for a leaf VCL entry in
the … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.10.13.1.2.1.1.15 |
| ciscoAtmVclCrossVci This specifies the VCI value of the VCL to which this
VCL is cross-connected. For point to multi-point
connection, this is the root VCL's VCI for the leaf
entry. Similarly it i… | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.17 |
| ciscoAtmVclNextLeafIfIndex For point to point, this is zero i.e. not used.
For point to multi-point connection, this will be
the next leaf VCL's ifIndex on the multicast chain.
This will be 0 if this is … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.10.13.1.2.1.1.18 |
| ciscoAtmVclNextLeafVpi For point to point, this is zero i.e. not used.
This apply only to point to multi-point connection,
this will be the next leaf VCL's VPI on the multicast
chain. | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.19 |
| ciscoAtmVclSpanType Vcl span is either a transit one or a terminating one. | column | SpanType | .1.3.6.1.4.1.9.10.13.1.2.1.1.2 |
| ciscoAtmVclNextLeafVci For point to point, this is zero i.e. not used.
This apply only to point to multi-point connection,
this will be the next leaf VCL's VCI on the multicast
chain. | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.20 |
| ciscoAtmVclAalEncapFlag Encapsulation type for terminating VC. | column | Enumeration | .1.3.6.1.4.1.9.10.13.1.2.1.1.21 |
| ciscoAtmVclAalEncapProtocol Protocol for terminating VC if EncapFlag is aal5Mux. | column | Enumeration | .1.3.6.1.4.1.9.10.13.1.2.1.1.22 |
| ciscoAtmVclAalUserVcType Following is the list of user virtual circuit types in
case aal5Lane encapusation on this virtual channel.
boxConfigure -- The shared Server/Client end of a
Conf… | column | Enumeration | .1.3.6.1.4.1.9.10.13.1.2.1.1.23 |
| ciscoAtmVclAtmInArpInterval Time interval in minutes to send InArp on a PVC for
IP over ATM. 0 will disable the InArp for this pvc. | column | minutes Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.24 |
| ciscoAtmVclRemoteAddr Soft PVC target address if this is the calling side
Soft PVC source address if this is called side.
Atomically set ConnState, RemoteAddr, RemoteVpi
and RemoteVci will create or d… | column | CISCO-ATM-IF-MIBNsapAtmAddr | .1.3.6.1.4.1.9.10.13.1.2.1.1.25 |
| ciscoAtmVclRemoteVpi Soft PVC target VPI in calling side. 0 in called side. | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.26 |
| ciscoAtmVclRemoteVci Soft PVC target VCI in calling side. 0 in called side. | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.27 |
| ciscoAtmVclLocation Indicate calling or called side of a soft PVC.
If ciscoAtmVclConfigType is not soft then
ciscoAtmVclLocation value should be ignored. | column | Location | .1.3.6.1.4.1.9.10.13.1.2.1.1.28 |
| ciscoAtmVclSlowRetryIntv Soft PVC slow retry interval in seconds. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.29 |
| ciscoAtmVclConfigType Vcl type is either a PVC, SVC, Soft PVC or Soft Passive half leg.
The half leg can be set to Passive through user configuration only. | column | ConfigType | .1.3.6.1.4.1.9.10.13.1.2.1.1.3 |
| ciscoAtmVclNumAttempts Number of retries made to install this soft PVC
connection. If ciscoAtmVclConfigType is not soft then
ciscoAtmVclNumAttempts value should be ignored. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.30 |
| ciscoAtmVclLastReleaseCause Value of the Cause field of the Cause
Information Element in the last Release
Signalling message received for this SPVC.
Indicates the reason for the Release.
ciscoAtmVclConfigTyp… | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.31 |
| ciscoAtmVclUpcViolations The total number of nonconforming cells detected
by Usage Parameter Control (UPC) for cells received
on this VCL.
On LS1010 systems, this counter is valid only on those
equipped w… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.32 |
| ciscoAtmVclEpdTpdCellDrops obsolete Never implemented. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.33 |
| ciscoAtmVclEpdTpdPacketDrops The total number of EPD/TPD packet drops of
packets received on this VCL.
This counter is valid only:
- if EPD is enabled on this VCL.
- on LS1010 systems, only those equipped w… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.34 |
| ciscoAtmVclEpdTpdPacketsIn The total number of packets received in their
entirety on this VPL.
This counter is valid only:
- if EPD is enabled on this VCL.
- on LS1010 systems, only those equipped with
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.35 |
| ciscoAtmVclClp1Drops obsolete Never implemented. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.37 |
| ciscoAtmVclDefaultRxUpcTolerance If the tolerance (CDVT for CBR, ABR, UBR connections, Maximum
Burst Size for VBR connectons) requested for Usage
Parameter Control is not explicitly specified in VCL creation,
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.38 |
| ciscoAtmVclDefaultRxUpcVbrCdvt If the Cell Delay Variation Tolerance (CDVT) requested for
Usage Parameter Control for a VBR connection is not explicitly
specified in VCL creation, this object contains the def… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.39 |
| ciscoAtmVclRxUpcMode Usage Parameter Control opeartion is pass,tag,drop or
local shaping at this connection. | column | UpcStatus | .1.3.6.1.4.1.9.10.13.1.2.1.1.4 |
| ciscoAtmVclLsPerVcqWrrWeight Configure the weighting specified for a VC half-leg
within a service class to make the scheduling decision
among other active VCLs in the service class. This
is for transmit on th… | column | Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.40 |
| ciscoAtmVclLsPerVcqXmtQueuedCells Number of cells received on this VCL and
residing on the per-connection queue. Note that
this value is not valid until the VCL is in an
active cross-connect. This object
is defi… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.41 |
| ciscoAtmVclLsPerVcQThreshGrp The Threshold Group to which the cell-queue
for cells received by this VC are queued.
Note that this value is not valid until the
VCL is in an active cross-connect. This object… | column | CISCO-ATM-RM-MIBLsPerVcqThresholdGroup | .1.3.6.1.4.1.9.10.13.1.2.1.1.42 |
| ciscoAtmVclInClp0Cells The total number of cells with the CLP bit clear
received on this VCL. Note that these cells may
subsequently be discarded.
This counter is valid only:
- on LS1010 systems, only … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.43 |
| ciscoAtmVclInClp1Cells The total number of cells with the CLP bit set
received on this VCL. Note that these cells may
subsequently be discarded.
This counter is valid only:
- on LS1010 systems, only th… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.44 |
| ciscoAtmVclOutClp0Cells The total number of cells with the CLP bit clear
transmitted on this VCL.
This counter is valid only:
- on LS1010 systems, only those equipped with
Feature Card - Per Flow Qu… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.45 |
| ciscoAtmVclOutClp1Cells The total number of cells with the CLP bit set
transmitted on this VCL.
This counter is valid only:
- on LS1010 systems, only those equipped with
Feature Card - Per Flow Queu… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.46 |
| ciscoAtmVclCellDrops The total number of cells received on this
VCL, but discarded.
This counter is valid only:
- on LS1010 systems, only those equipped with
Feature Card - Per Flow Queueing. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.47 |
| ciscoAtmVclClp0VcqFullCellDrops The total number of cells received on this
VCL with the CLP bit clear, discarded because
the per-VC queue limit is exceeded.
This counter is valid only:
- if EPD is disabled on t… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.48 |
| ciscoAtmVclVcqClpThreshCellDrops The total number of cells received on this
VCL, discarded because the discard threshold
(as opposed to the queue-limit) is exceeded
on the per-VC queue, and the CLP bit is set.
Th… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.49 |
| ciscoAtmVclEpdEnable Early Packet Discard option used for this VCL.
The use is as follows:
enable(1)
Packet-discard is enabled.
disable(2)
Packet-discard is disabled.
useTrafficDescr(3)
Packe… | column | Enumeration | .1.3.6.1.4.1.9.10.13.1.2.1.1.5 |
| ciscoAtmVclRxNegTraffDescrIndex Identifies the entry in the atmTrafficDescrParamTable which
contains negotiated traffic parameters applied to the receive
direction of this VCL.
This object is not … | column | - | .1.3.6.1.4.1.9.10.13.1.2.1.1.50 |
| ciscoAtmVclTxNegTraffDescrIndex Identifies the entry in the atmTrafficDescrParamTable which
contains negotiated traffic parameters applied to the transmit
direction of this VCL.
This object is not… | column | - | .1.3.6.1.4.1.9.10.13.1.2.1.1.51 |
| ciscoAtmVclSwFabOutCells The total number of cells transmitted on
this VCL by the Switch Fabric. This object is not
instantiated on systems that do not have support for
collecting such statistics. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.52 |
| ciscoAtmVclSwFabOutClp0Cells The total number of cells with the CLP bit clear
transmitted on this VCL by the Switch Fabric.
This object is not instantiated on systems
that do not have support for collecting … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.53 |
| ciscoAtmVclSwFabOutClp1Cells The total number of cells with the CLP bit set
transmitted on this VCL by the Switch Fabric.
This object is not instantiated on systems that
do not have support for collecting su… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.54 |
| ciscoAtmVclConnName A human readable string that identifies this connection.
This object will return a zero-length string if value is
not set. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.13.1.2.1.1.55 |
| ciscoAtmVclConnType This object represent the PVC Type for this connection.
- local connection within the node
- endToEnd across several nodes.
This object serves as an information object for a
… | column | Enumeration | .1.3.6.1.4.1.9.10.13.1.2.1.1.56 |
| ciscoAtmVclConnState The connection state of this VCL. | column | ConnState | .1.3.6.1.4.1.9.10.13.1.2.1.1.6 |
| ciscoAtmVclOamLoopbkTxInterval Frequency of OAM loopback cell are generated on this
virtual channel. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.13.1.2.1.1.7 |
| ciscoAtmVclOamSegmentLoopback Enable segment loopback on this virtual channel. | column | EnableStatus | .1.3.6.1.4.1.9.10.13.1.2.1.1.8 |
| ciscoAtmVclOamEndLoopback Enable end to end loopback on this virtual channel. | column | EnableStatus | .1.3.6.1.4.1.9.10.13.1.2.1.1.9 |