arrisRouterRIPRoutedSubnetNAT

ARRIS-ROUTER-DEVICE-MIB · .1.3.6.1.4.1.4115.1.20.1.1.2.5.18
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
If this is true/enabled, then a the Routed Subnet will be NATed using the Gateway Ip Address
If this is false/disabled then the NAT will be disabled for the routed subnet.

Context

MIB
ARRIS-ROUTER-DEVICE-MIB
OID
.1.3.6.1.4.1.4115.1.20.1.1.2.5.18
Type
scalar
Access
readwrite
Status
current
Parent
arrisRouterRIPObjects
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arrisRouterRIPEnable
Enable/disable RIP authentication.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.1
arrisRouterRIPRoutedSubnetIPType
The IP address type for arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.10
arrisRouterRIPRoutedSubnetIP
The specific network in the configured subnet that will be adverstised and routed. This feature allows for the configuration of a public LAN-side subnet of hosts which is not ne…
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.11
arrisRouterRIPRoutedSubnetGWNetIPType
The IP address type for arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.12
arrisRouterRIPRoutedSubnetGWNetIP
See the description of arrisRouterRIPRoutedNetIP. This is the Gateway IP address for the routable subnet.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.13
arrisRouterRIPRoutedSubnetMask
The subnet mask used for the routed subnet. This value will match arrisRouterRIPPrefixLen. Usually prefixes are used with IPv6 and Netmasks are used with IPv4.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.14
arrisRouterRIPRoutedSubnetEnabled
If this is enabled, then we will advertise the RIP routed subnet network IP address with the next hop as the CM IP address.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.15
arrisRouterRIPSendCMInterface
If this is true/enabled, then RIP advertisements will be sent via the CM IP interface. If this is false/disabled then RIP advertisements will be sent via the eRouter WAN IP inter…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.16
arrisRouterRIPRoutedSubnetDHCP
If this is true/enabled, then a DHCP server will be started on the device for the routed subnet. If this is false/disabled then the DHCP server will not be started and all LAN-bas…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.17
arrisRouterRIPAuthEnable
Enable/disable RIP authentication and type.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.2.5.2
arrisRouterRIPReportTime
RIP reporting interval.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.2.5.3
arrisRouterRIPAuthKeyString
RIP authentication key.
scalarOctetString.1.3.6.1.4.1.4115.1.20.1.1.2.5.4
arrisRouterRIPAuthKeyID
RIP authentication key identifier.
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.2.5.5
arrisRouterRIPIPAddrType
RIP destination IP address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.6
arrisRouterRIPIPAddr
RIP unicast reporting destination IP address. If this is configured to an ip address other than 0.0.0.0, then the RIP messaging ( which is generally multicasted upstream ) will b…
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.7
arrisRouterRIPPrefixLen
The prefix for the routed subnet. This value can be set or the value: arrisRouterRIPSubnetMask. For additional details see the description for: arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressPrefixLength.1.3.6.1.4.1.4115.1.20.1.1.2.5.8
arrisRouterRIPAuthKeyChain
RIP authentication key chain.
scalarOctetString.1.3.6.1.4.1.4115.1.20.1.1.2.5.9