arrisRouterRIPObjects

ARRIS-ROUTER-DEVICE-MIB · .1.3.6.1.4.1.4115.1.20.1.1.2.5
MIB view Table view

Object

node

No description available.

Context

MIB
ARRIS-ROUTER-DEVICE-MIB
OID
.1.3.6.1.4.1.4115.1.20.1.1.2.5
Type
node
Parent
arrisRouterLanConfig
Siblings
13
Children
18

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arrisRouterLanSrvDHCPOptionsTable
Table contains DHCP server option information for a specific Lan.
table-.1.3.6.1.4.1.4115.1.20.1.1.2.11
arrisRouterLanMaxIPv6RAInterval
The maximum interval between IPv6 router advertisements. Must be positive and no less than minimum IPv6 RA interval.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.2.13
arrisRouterLanMinIPv6RAInterval
The minimum interval between IPv6 router advertisements. Must be positive and no more than maximum IPv6 RA interval.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.2.14
arrisRouterLanBridgeType
Control the behavior of switching NAT Mode among 'RoutedWithNAT', 'RoutedWithoutNAT' and 'Bridged' on LAN Setup WEB GUI page. subnetBridge(0): When switch NAT mode from 'RoutedWi…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.2.15
arrisRouterLanUSBPortTable
Table contains configuration information for the physical USB ports.
table-.1.3.6.1.4.1.4115.1.20.1.1.2.16
arrisRouterLanFileSharingObjsnode-.1.3.6.1.4.1.4115.1.20.1.1.2.17
arrisRouterLanIPv6RALifetime
The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertMaxInterval and 9000…
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.2.19
arrisRouterLanSrvTable
Table contains information for a specific Lan.
table-.1.3.6.1.4.1.4115.1.20.1.1.2.2
arrisRouterLanDNSTable
Table contains DSN server information for a specific Lan.
table-.1.3.6.1.4.1.4115.1.20.1.1.2.3
arrisRouterClientObjectsnode-.1.3.6.1.4.1.4115.1.20.1.1.2.4
arrisRouterLanSettings
This always returns doNothing(0) when read. This applies settings for the primary LAN if applyPrimaryLan(1) is used. The network will be restarted. The network(s) will be restart…
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.2.6
arrisRouterLanEtherPortTable
Table contains configuration information for the physical Ethernet ports.
table-.1.3.6.1.4.1.4115.1.20.1.1.2.8
arrisRouterRIPngObjectsnode-.1.3.6.1.4.1.4115.1.20.1.1.2.9
Child Objects
ObjectTypeSyntaxOID
arrisRouterRIPEnable
Enable/disable RIP authentication.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.1
arrisRouterRIPRoutedSubnetIPType
The IP address type for arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.10
arrisRouterRIPRoutedSubnetIP
The specific network in the configured subnet that will be adverstised and routed. This feature allows for the configuration of a public LAN-side subnet of hosts which is not ne…
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.11
arrisRouterRIPRoutedSubnetGWNetIPType
The IP address type for arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.12
arrisRouterRIPRoutedSubnetGWNetIP
See the description of arrisRouterRIPRoutedNetIP. This is the Gateway IP address for the routable subnet.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.13
arrisRouterRIPRoutedSubnetMask
The subnet mask used for the routed subnet. This value will match arrisRouterRIPPrefixLen. Usually prefixes are used with IPv6 and Netmasks are used with IPv4.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.14
arrisRouterRIPRoutedSubnetEnabled
If this is enabled, then we will advertise the RIP routed subnet network IP address with the next hop as the CM IP address.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.15
arrisRouterRIPSendCMInterface
If this is true/enabled, then RIP advertisements will be sent via the CM IP interface. If this is false/disabled then RIP advertisements will be sent via the eRouter WAN IP inter…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.16
arrisRouterRIPRoutedSubnetDHCP
If this is true/enabled, then a DHCP server will be started on the device for the routed subnet. If this is false/disabled then the DHCP server will not be started and all LAN-bas…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.17
arrisRouterRIPRoutedSubnetNAT
If this is true/enabled, then a the Routed Subnet will be NATed using the Gateway Ip Address If this is false/disabled then the NAT will be disabled for the routed subnet.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4115.1.20.1.1.2.5.18
arrisRouterRIPAuthEnable
Enable/disable RIP authentication and type.
scalarEnumeration.1.3.6.1.4.1.4115.1.20.1.1.2.5.2
arrisRouterRIPReportTime
RIP reporting interval.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4115.1.20.1.1.2.5.3
arrisRouterRIPAuthKeyString
RIP authentication key.
scalarOctetString.1.3.6.1.4.1.4115.1.20.1.1.2.5.4
arrisRouterRIPAuthKeyID
RIP authentication key identifier.
scalarInteger32.1.3.6.1.4.1.4115.1.20.1.1.2.5.5
arrisRouterRIPIPAddrType
RIP destination IP address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4115.1.20.1.1.2.5.6
arrisRouterRIPIPAddr
RIP unicast reporting destination IP address. If this is configured to an ip address other than 0.0.0.0, then the RIP messaging ( which is generally multicasted upstream ) will b…
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4115.1.20.1.1.2.5.7
arrisRouterRIPPrefixLen
The prefix for the routed subnet. This value can be set or the value: arrisRouterRIPSubnetMask. For additional details see the description for: arrisRouterRIPRoutedNetIP
scalarINET-ADDRESS-MIBInetAddressPrefixLength.1.3.6.1.4.1.4115.1.20.1.1.2.5.8
arrisRouterRIPAuthKeyChain
RIP authentication key chain.
scalarOctetString.1.3.6.1.4.1.4115.1.20.1.1.2.5.9