ARRIS-ROUTER-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
59
Rows
59
Columns
414
.1.3.6.1.4.1.4115.1.20.1.1.1.7 · 1 row entry · 12 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWanCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWanCurrentTable'
Table contains information for a specific Static Wan IP address.  In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses.
arrisRouterWanCurrentEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.7.1
Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses.
Column Syntax OID
Index currently limit to 4.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.1
Static IP address type for Wan connection.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.2
Static IP address for Wan connection.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.3
Netmask (prefix) for Wan connection.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.4
Gateway address type for Wan connection.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.5
Gateway address for Wan connection.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.6
Type of IP address.
Enumeration
Enumerated Values:
0unknown
1dynamic
2static
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.7
The netmask for the WAN connection if it is IPv4.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.8
The prefix, or initial bits of the address, given to the router to delegate to its attached CPEs.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.9
The length for the prefix to be delegated to attached CPEs.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.10
The preferred lifetime for the assigned IPv6 address of the router.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.11
The valid lifetime for the assigned IPv6 address of the router.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.7.1.12
.1.3.6.1.4.1.4115.1.20.1.1.1.9 · 1 row entry · 9 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWanStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWanStaticTable'
Table contains information for a specific Static Wan IP address.  In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses.
arrisRouterWanStaticEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.9.1
Table contains information for a specific Static Wan IP address. In some environments, there may be both an IPv6 and IPv6 address or multiple IPv6 addresses.
Column Syntax OID
Index currently limit to 4.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.1
Static IP address type for Wan connection.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.2
Static IP address for Wan connection.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.3
Netmask (prefix) for Wan connection.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.4
Gateway address type for Wan connection.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.5
Gateway address for Wan connection.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.6
RowStatus used to add/remove rows from the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.7
Length of IPV6 delegated prefix.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.8
IPV6 delegated prefix.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4115.1.20.1.1.1.9.1.9
.1.3.6.1.4.1.4115.1.20.1.1.1.11.2 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWanCurrentDNSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWanCurrentDNSTable'
Table contains the IP addresses of the current DNS servers. These may be dynamically obtained from the WAN DHCP server or these may 
have been statically configured in arrisRouterWanStaticDNSTable.
arrisRouterWanCurrentDNSEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1
Table contains the IP addresses of the current DNS servers. These may be dynamically obtained from the WAN DHCP server or these may
have been statically configured in arrisRouterWanStaticDNSTable.
Column Syntax OID
Index which also indicates the order/priority for DNS lookups.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.1
Type of the IP address of the DNS server
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.2
The IP address of the DNS server.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.11.2.1.3
.1.3.6.1.4.1.4115.1.20.1.1.1.11.4 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWanStaticDNSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWanStaticDNSTable'
Table contains the IP addresses of the DNS servers that have been statically assigned.  
This table may be empty if arrisRouterWanUseAutoDNS is set to true
arrisRouterWanStaticDNSEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1
Table contains the IP addresses of the DNS servers that have been statically assigned. This table may be empty if arrisRouterWanUseAutoDNS is set to true
Column Syntax OID
Index which also indicates the order/priority for DNS lookups. There is a limit of 8 rows.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.1
Type of the IP address of the DNS server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.2
The IP address of the DNS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.3
The rowstatus used to add and remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.1.11.4.1.4
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1 · 1 row entry · 39 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterSoftGreWanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterSoftGreWanTable'
Table contains information for a specific SoftGreWan
arrisRouterSoftGreWanEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1
Table contains information for a specific SoftGreWan. ONLY Index of 1 currently Supported!
Indexes
Column Syntax OID
Enable or disable the SoftGRE WiFi Hotspot Client.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.1
Name of the member physical network interface (or virtual
network interface in the case of a wireless SSID) comprising
the logical interface, aka LAN subnet.
This mib object takes in an unsigned intege…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.2
The maximum number of roaming devices for this AP
Setting the number of concurrent SoftGre client sessions to
0 must cause the following actions to be performed by
the Gateway.
Disable broadcast of SoftGre SSID (No c…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.3
The FQDN of the WLAN GW that will terminate tunnels from this AP.
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.4
The type of internet address used for the secondary WLAN GW that will terminate tunnels from this AP.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.5
The IP address of the secondary WLAN GW that will terminate tunnels from this AP.
If the arrisRouterSoftGreWanControllerFqdn is FQDN format, this value will be ignored.
When the MIB arrisRouterSoftGreWanControllerProvis…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.6
Number of ICMP Pings sent at a regular interval for WLAN GW
reachability health check
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.7
Configured interval in seconds between WLAN GW reachability health checks
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.8
Number of consecutive un-acknowledged pings before it is determined
that the current WLAN GW is no longer available and will fail-over
to another WLAN GW if the DNS responded with more than one WLAN GW IP
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.9
Enable or disable the SoftGRE Circuit ID being added to DHCP
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.10
Enable or disable the SoftGRE RemoteId being added to DHCP
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.11
Enable or disable Radius Authentication for the SoftGRE Tunnel
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.12
The type of internet address used for arrisRouterRadiusAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.13
The internet address of the RADIUS server for this service set.
If not specified and Radius Enabled, will default to WLAN GW
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.14
The UDP port used to communicate with the RADIUS server for this
service set. Defaults to Port 1812
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.15
The RADIUS key.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.16
The network re-authentication interval. If set to zero, no
re-authentication will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.17
Enable or disable the VLan Q tag being added to the packet
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.18
This object allows the overwrite of the DSCP field per RFC 3260.
DIFFSERV-DSCP-TCDscpOrAnyr/w
Type Constraints:
range: -1..63
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.19
Retry timer(seconds) triggered when HHG is unable to resolve the WLAN GW
Unsigned32r/w
Constraints:
range: 30-1800
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.20
The type of internet address used for current active Hotspot WLAN GW controller.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.21
The internet address of current active Hotspot WLAN GW controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.22
The type of internet address used for Primary Hotspot WLAN GW controller in DNS SRV record of FQDN.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.23
The internet address of Primary Hotspot WLAN GW controller in DNS SRV record of FQDN.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.24
The type of internet address used for Secondary Hotspot WLAN GW controller in DNS SRV record of FQDN.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.25
The internet address of Secondary Hotspot WLAN GW controller in DNS SRV record of FQDN.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.26
This MIB object reports the current operational state of tunnel.
The up(0) state indicates the interface is able to transmit and receive network traffic.
The down(1) state indicates the interface is prevented from ent…
Enumeration
Enumerated Values:
0up
1down
2error
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.27
The GRE tunnel local IP address, 0 for GW IP, 1 for CM IP. The address type must be same to the
GRE tunnel server address configured by arrisRouterSoftGreWanControllerFqdn/arrisRouterSoftGreWanControllerProvisionedSeco…
Enumerationr/w
Enumerated Values:
0gwip
1cmip
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.29
The RADIUS local IP address, 0 for GW IP, 1 for CM IP.
Enumerationr/w
Enumerated Values:
0gwip
1cmip
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.30
The type of internet address used for arrisRouterSoftGreAcctServerAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.31
The internet address of the RADIUS accounting server for this service set.
If not specified and Radius Enabled, will default to RADIUS authentication server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.32
The UDP port used to communicate with the RADIUS accounting server for this
service set. Defaults to Port 1813
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.33
The RADIUS accounting key.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.34
The RADIUS accounting interim update interval. If set to zero, no
accounting update will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.35
The type of internet address used for arrisRouterRadiusSecondaryAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.36
The internet address of the Secondary RADIUS server for this service set.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.37
The UDP port used to communicate with the Secondary RADIUS server for this
service set. Defaults to Port 1812
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.38
The RADIUS key.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.39
The network re-authentication interval of the Secondary RADIUS server.
If set to zero, no re-authentication will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.1.1.40
.1.3.6.1.4.1.4115.1.20.1.1.1.19.2 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterSoftGreSSIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterSoftGreSSIDTable'
Table contains information to be assigned per SSID across GRE tunnel.
Table is 1 based
arrisRouterSoftGreSSIDEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1
Table contains the information to be assigned per SSID across GRE tunnel.
Index is the SSID
Indexes
Column Syntax OID
The VLan ID to be used for this managed SSID.
Set to zero to not use VLan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1.1
The VLan Priority to be used for this managed SSID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.1.19.2.1.2
.1.3.6.1.4.1.4115.1.20.1.1.1.20.1 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterDHCPRelayAgentSSIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterDHCPRelayAgentSSIDTable'
Table contains information to be assigned per SSID with DHCP Relay.
Table is 1 based
arrisRouterDHCPRelayAgentSSIDEntry row .1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1
Table contains the information to be assigned per SSID with DHCP Relay.
Index is the SSID.
Indexes
Column Syntax OID
Enable or disable the DHCPRelayAgent.
This DHCPRelayAgent feature is only working on bridge mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.1
Enable or disable the Circuit ID being added to DHCP
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.2
Enable or disable the RemoteId being added to DHCP
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.3
Enable or disable the SSID name being inserted to the beginning of DHCP Option 60
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.1.20.1.1.4
.1.3.6.1.4.1.4115.1.20.1.1.2.2 · 1 row entry · 34 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanSrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanSrvTable'
Table contains information for a specific Lan.
arrisRouterLanSrvEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.2.1
Table contains information for a specific Lan.
Indexes
Column Syntax OID
Textual name of this Lan.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.1
Ip Address Type of the SubnetMask for a specific Network.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.2
Ip Address of the SubnetMask for a specific Network.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.3
Ip Address Type of the Gateway for a specific Network.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.4
Ip Address of the Gateway for a specific Network.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.5
Ip Address Type of the Gateway for a specific Network.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.6
Ip Address of the Gateway for a specific Network.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.7
The VLan ID to be used for this Lan. Set to zero to not use VLan
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.8
Enable or disable the local DHCP server on this VLan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.9
The type of IP address for the start of the range of IP addresses to be handed out by this DHCP server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.10
The start of the range of IP addresses to be handed out by this DHCP server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.11
The type of IP address for the end of the range of IP addresses to be handed out by this DHCP server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.12
The end of the range of IP addresses to be handed out by this DHCP server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.13
The length of the lease time for dynamic (DHCP) IP addresses handed out by this device.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.14
Optional domain name for this lan
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.15
Enable or disable DNS relay
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.19
Get/set whether or not this Lan is in pass-thru mode or bridged/NAT.
To put the device into non-bridged mode with routing and NAT disabled -- pass-thru, use: passThru(1).
To put the device into bridged (routed) mode wit…
Enumerationr/w
Enumerated Values:
-1unknown
1passThru
2routedNAT
3routedNoNAT
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.21
Get/set whether or not the firewall is applied to this Lan
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.22
Get/set whether or not UPnP is enabled for this Lan
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.23
The timeout period in seconds for aging out
dynamically learned forwarding information.
The default value of zero means do not age
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.24
Enable or disable DNS override. If DNS override is true the IP addresses in arrisRouterLanDNSTable will be passed to LAN clients via DHCP.
Otherwise, the DNS servers received by the WAN connection will be passed to the…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.25
Specifies which NAT application layer gateway supplements are enabled
on this device. The default value for this object is for all ALG's
to be enabled. Reserved bits are for ALGs that are currently not supported.
Bitsr/w
Enumerated Values:
0rsvp
1ftp
2tftp
3kerb88
4netBiosDgm
5ike
6rtsp
7kerb1293
8h225
9pptp
10msn
11sip
12icq
13irc6667
14icqTalk
15net2Phone
16irc7000
17irc8000
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.26
Name of the member physical network interface (or virtual
network interface in the case of a wireless SSID) comprising the logical
interface, aka LAN subnet. This mib object takes in an unsigned integer with the
followi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.27
Controls whether or not the settings which define the
operating environment of
the logical interface, aka LAN subnet, are changeable via
the GUI.

When equal to unlocked, the environment se…
Enumerationr/w
Enumerated Values:
0unlocked
1locked
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.28
IPV6 The length indicating the routable portion of the prefix.
This length is advertised to the host either through DHCP or
router advertisement. The host uses this length as a clue to generate
the rest of the bi…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.29
IPV6 Enable or disable the local DHCPv6 server on this VLan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.30
IPV6 The start of the range of IP addresses to be handed out by this DHCP server.
NOTE - Only 128 - prefix_length(arrisRouterLanPrefixLengthV6) bits should be configured.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.31
IPV6 The end of the range of IP addresses to be handed out by this DHCP instace.
NOTE - Only 128 - prefix_length(arrisRouterLanPrefixLengthV6) bits should be configured.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.32
IPV6 lease time for dynamic (DHCP) IP addresses handed out by this DHCP server.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.33
IPV6 Link local IPV6 address
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.34
IPV6 Enable or disable DNS relay.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.35
IPV6 Enable or disable DNS override. If DNS override is true the IPv6 addresses in
arrisRouterLanDNSTable will be passed to LAN clients via DHCPv6. Otherwise, the DNS
servers received by the WAN connection will be p…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.36
The length of the lease time for dynamic (DHCP) IP addresses handed out by this device prior
to Gateway provisioning.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.37
Enable or disable the Parent Control to this subnet.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.2.1.39
.1.3.6.1.4.1.4115.1.20.1.1.2.3 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanDNSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanDNSTable'
Table contains DSN server information for a specific Lan.
arrisRouterLanDNSEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.3.1
Table contains DNS server information for a specific Lan.
Column Syntax OID
Table index, also corresponds to the order/priority of the DNS servers for lookups.
Current implementation only supports 3 IPv4 and 3 IPv6 DNS servers
Unsigned32
Constraints:
range: 1-6
.1.3.6.1.4.1.4115.1.20.1.1.2.3.1.1
Internet address type for the DNS server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.3.1.2
Internet address for the DNS server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.3.1.3
RowStatus used to add or remove DNS row entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.3.1.4
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2 · 1 row entry · 16 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanClientTable'
Table contains the set of DHCP clients for this Lan.
arrisRouterLanClientEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1
Table contains the set of DHCP clients for this Lan.
Column Syntax OID
Current IP address type for the DHCP client.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.1
Current IP address for the DHCP client.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.2
Hostname for the DHCP client.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.3
MAC address of the DHCP client.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.4
The type of the adapter.
Enumeration
Enumerated Values:
0unknown
1ethernet
2usb
3moca
4dsg
5wireless1
6wireless2
7wireless3
8wireless4
9wireless5
10wireless6
11wireless7
12wireless8
13wireless9
14wireless10
15wireless11
16wireless12
17wireless13
18wireless14
19wireless15
20wireless16
21ethernet2
22ethernet3
23ethernet4
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.6
Type of IP address. Value list:
1: unknown(0) ( No client should use this value)
2: dynamic(1) ( The client IP address is in DHCPv6 or DHCPv6 lease file, but it don't configured as Reserved client on WebGUI)
3: stat…
Enumeration
Enumerated Values:
0unknown
1dynamic
5static
6dynamicReserved
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.7
The time and date when this lease expires. If arrisRouterLanClientType is static this is meaningless and will return an unspecified date/time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.9
To create or remove static clients. It is not possible to remove rows that correspond to dynamic IP addresses.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.13
Returns the if the client is currently online (connected/active) or offline.
Enumeration
Enumerated Values:
0offline
1online
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.14
Comment field for the client.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.15
Organizationally unique identifier of the Device manufacturer as provided to the Gateway by the Device.
Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possibl…
OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.17
Serial number of the Device as provided to the Gateway by the Device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.18
Identifier of the class of product for which the Device's serial number applies as provided to the Gateway by the Device.
If the Device does not provide a Product Class, then this parameter MUST be an empty string.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.19
Device name.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.20
Returns the time from last change state to now.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.24
Returns the time since connected in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.4.2.1.25
.1.3.6.1.4.1.4115.1.20.1.1.2.4.3 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterDeviceUpDownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterDeviceUpDownTable'
This table contains information on when client devices connected to this Router are up and accessible.
arrisRouterDeviceUpDownEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1
This table contains information on when client devices connected to this Router are up and accessible.
Column Syntax OID
Index used to order the arrisRouterClientsUpDownTable entries.
Integer32
Constraints:
range: 1-30
.1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.1
MAC address of the client. This is used to index the table.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.2
The IP address type for the client during the time period specified by this row.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.3
This is ONLY used to remove rows/items from this table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.4.3.1.7
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5 · 1 row entry · 9 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanCustomTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanCustomTable'
Table contains the set of mapping of LAN clients to friendly names and other attributes.  
The table can be used to look up clients by IP address or MAC address or both. 
The only field the system will fill-in automaticaly is arrisRouterLanCustomMACMfg.
arrisRouterLanCustomEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1
Table contains the set of mapping of LAN clients to friendly names and other attributes.
The table can be used to look up clients by IP address or MAC address or both.
The only field the system will fill-in automatic…
Column Syntax OID
Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.1
MAC address of the client. This is used to index the table.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.2
The IP address. This is optional but either the IP or MAC should be present.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.3
The IP address. This is optional but either the IP or MAC should be present.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.4
The 'friendly' name for this client. The default is the host name.
Users can edit this via a user interface.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.5
Hostname for the client.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.6
The manufacturer of the hardware adapter.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.7
Additional comments.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.8
Set to true(1) to remove this device from the list/table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.4.5.1.9
.1.3.6.1.4.1.4115.1.20.1.1.2.4.8 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanClientDHCPOptionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanClientDHCPOptionsTable'
Table contains the set of DHCP clients for this Lan.
arrisRouterLanClientDHCPOptionsEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1
Table contains the set of DHCP clients for this Lan.
Column Syntax OID
Table index
Unsigned32
Constraints:
range: 1-4
.1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.1
DHCP Option Number
Unsigned32
Constraints:
range: 1-254
.1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.2
DHCP Option Value.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.3
RowStatus used to add or remove DHCP Options row entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.4.8.1.4
.1.3.6.1.4.1.4115.1.20.1.1.2.8 · 1 row entry · 7 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanEtherPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanEtherPortTable'
Table contains configuration information for the physical Ethernet ports.
arrisRouterLanEtherPortEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.8.1
Table contains configuration information for the physical Ethernet ports.
Column Syntax OID
Table index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.1
Corresponding IF Index in the MIB-2 IFTable
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.2
Get and set if this Ethernet port is enabled.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.3
Get and set the duplex setting for this Ethernet port.
The device may need to be rebooted to apply this settings
Enumerationr/w
Enumerated Values:
0halfDuplex
1fullDuplex
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.4
Get and set the speed setting for this Ethernet port. This is the configured speed of the port if auto-negotiate is OFF.
To query the actual current speed of the interface use the MIB-2 OID: .iso.org.dod.internet.mgm…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.5
Get and set the 'auto-negotiate' setting for this Ethernet port.
If the port is set to 'autoNegotiate', the settings for 'arrisRouterLanEtherPortDuplex'
and 'arrisRouterLanEtherPortSpeed' are not used.
The device may…
Enumerationr/w
Enumerated Values:
0manualConfigure
1autoNegotiate
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.6
Get if the Ethernet port has 'link' or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.8.1.7
.1.3.6.1.4.1.4115.1.20.1.1.2.11 · 1 row entry · 6 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanSrvDHCPOptionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanSrvDHCPOptionsTable'
Table contains DHCP server option information for a specific Lan.
arrisRouterLanSrvDHCPOptionsEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.11.1
Table contains DHCP server option information for a specific Lan.
Column Syntax OID
Table index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.1
DHCP Option Enable
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.2
Internet address type for the DHCP server
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.3
DHCP Option Number
Unsigned32
Constraints:
range: 1-254
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.4
DHCP Option Value.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.5
RowStatus used to add or remove DHCP Options row entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.11.1.6
.1.3.6.1.4.1.4115.1.20.1.1.2.16 · 1 row entry · 12 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanUSBPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanUSBPortTable'
Table contains configuration information for the physical USB ports.
arrisRouterLanUSBPortEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.16.1
Table contains configuration information for the physical USB ports.
Column Syntax OID
Table index
Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.1
Get whether the USB port has 'link' or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.2
Description of the connected USB device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.3
Serial number of the connected USB device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.4
Get the speed for the USB port.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.5
Get manufacturer information of the connected USB device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.6
Get/Set storage name of the connected USB device.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.7
Get file system used by the connected USB device.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.8
Space available of the connected USB device.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.9
Total space of the connected USB device.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.10
save file name, the file is used to save first-level folders on USB
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.11
Set to true to delete the USB storage.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.16.1.12
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3 · 1 row entry · 10 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanFileSharingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanFileSharingTable'
Table contains the information of the sharing.
arrisRouterLanFileSharingEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1
Table contains information of the sharing.
Column Syntax OID
Table index
Unsigned32
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.1
RowStatus used to add/remove rows from the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.2
USB port
Unsigned32r/w
Constraints:
range: 1-2
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.3
share directory
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.4
share name
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.5
enable/disable http for this share
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.6
enable/disable ftp for this share
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.7
whether permit everyone to access the share
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.8
everyone permission, it is available only when arrisRouterLanFilesharingVisibility is set to TRUE
Enumerationr/w
Enumerated Values:
0noAccess
1readOnly
2writeOnly
3readandWrite
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.9
description for the share
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.4115.1.20.1.1.2.17.3.1.10
.1.3.6.1.4.1.4115.1.20.1.1.2.17.4 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanLocalUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanLocalUserTable'
Table contains the user permissions for share .
arrisRouterLanLocalUserEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1
Table contains the user permissions for share.
Column Syntax OID
Table index
Unsigned32
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.1
RowStatus used to add/remove rows from the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.2
Local user name
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.3
Local user password
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.2.17.4.1.4
.1.3.6.1.4.1.4115.1.20.1.1.2.17.5 · 1 row entry · 1 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterLanFilesharingPermitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterLanFilesharingPermitTable'
Table contains the user permissions for share .
arrisRouterLanFilesharingPermitEntry row .1.3.6.1.4.1.4115.1.20.1.1.2.17.5.1
Table contains the user permissions for share.
Column Syntax OID
User permission, it is available only when arrisRouterLanFilesharingVisibility is set to FALSE
Enumerationr/w
Enumerated Values:
0noAccess
1readOnly
2writeOnly
3readandWrite
.1.3.6.1.4.1.4115.1.20.1.1.2.17.5.1.1
.1.3.6.1.4.1.4115.1.20.1.1.3.22 · 1 row entry · 16 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterBSSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterBSSTable'
Table contains settings for individual wireless networks (SSID).
arrisRouterBSSEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.22.1
Table contains settings for individual wireless networks (SSID).
Indexes
Column Syntax OID
The physical address associated with this service set
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.1
The SSID for this BSS.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.2
Select to enable/make active this SSID
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.3
Select to broadcast or not this SSID. It is somewhat more secure to NOT broadcast the SSID.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.4
The security mode. The arrisRouterWpsMode or arrisRouterWps50Mode will be set to disabled(0) when the primary SSID security mode set to wep(1).
Enumerationr/w
Enumerated Values:
0disabled
1wep
2wpaPsk
3wpa2Psk
4wpaEnterprise
5wpa2Enterprise
6wepEnterprise
7wpaWpa2Psk
8wpaWpa2Enterprise
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.5
Controls what stations will be given access to the device. If set to
allowAny(1), then any station will be allowed to connect. If set
to restrictToList(2), then only stations whose MAC address appears in
the arrisRout…
Enumerationr/w
Enumerated Values:
1allowAny
2allowList
3denyList
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.6
If set to true, this service set will
have access to the wide area internet, but will have restricted access
to the local area network. If set to false, this service set will be authorized as a full member of
the local…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.7
Current count of items in the MACAccessTable
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.8
Set to clear(1) to clear the entire list of MAC addresses in arrisRouterMACAccessTable
Enumerationr/w
Enumerated Values:
1clear
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.9
Sets the ARP audit interval for periodical checking all ARP entries under this SSID whether the entry is still valid.
If set to zero, periodicical checking is disabled for this SSID.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.10
The maximum number of concurrent wifi clients for this AP.
0 means no limit
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.11
Enable/disable WMM(Wi-Fi Multimedia) based on SSID.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.12
Enable/disable WMM APSD(Wi-Fi Multimedia Automatic Power Save Delivery) based on SSID.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.13
Indicates the time and date when the BSS will be disabled. The configured time and date must be after the current TOD.The format is: dd/mm/yyyy-hh:mm.(e.g: 29/10/2014-18:36)
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.14
The default SSID (Service Set Identifier) set from the factory.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.15
Enable/disable STA Steering for this BSS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.22.1.16
.1.3.6.1.4.1.4115.1.20.1.1.3.23 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWEPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWEPTable'
Table contains settings for wireless networks.
arrisRouterWEPEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.23.1
Table contains settings for wireless networks.
Indexes
Column Syntax OID
Controls and reflects the default key which will be used when 64 or
128 bit encryption is enabled. Indicates the entry from the
arrisRouterWEP64BitKeyTable if arrisRouterWEPEncryptionMode is set to wep64(1), or
the en…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.23.1.1
Selects the WEP encryption method used by this service set.
If set to wep64(1), then 64 bit WEP encryption will be
used with the keys from the arrisRouterWEP64BitKeyTable. If set to
wep128(2), then 128 bit WEP encrypt…
Enumerationr/w
Enumerated Values:
1wep64
2wep128
.1.3.6.1.4.1.4115.1.20.1.1.3.23.1.2
.1.3.6.1.4.1.4115.1.20.1.1.3.24 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWEP64BitKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWEP64BitKeyTable'
A table of 40 bit key values used when operating in WEP 64 mode.
arrisRouterWEP64BitKeyEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.24.1
A key to be used by the row in the arrisRouterBSSTable identified by the
value of ifIndex in the row index.
Column Syntax OID
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4115.1.20.1.1.3.24.1.1
A 40 bit key to be used when the corresponding instance of
arrisRouterWiFiSecurityMode is set to wep(1) and the corresponding instance
of arrisRouterWEPEncryptionMode is set to wep64(1).
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.24.1.2
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.3.24.1.3
.1.3.6.1.4.1.4115.1.20.1.1.3.25 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWEP128BitKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWEP128BitKeyTable'
A table of 104 bit key values used when operating in WEP 128 mode.
arrisRouterWEP128BitKeyEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.25.1
A key to be used by the row in the arrisRouterBSSTable identified by the
value of ifIndex in the row index.
Column Syntax OID
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4115.1.20.1.1.3.25.1.1
A 104 bit key to be used when the corresponding instance of
arrisRouterWiFiSecurityMode is set to wep(1) and the corresponding instance
of arrisRouterWEPEncryptionMode is set to wep128(128).
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.25.1.2
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.3.25.1.3
.1.3.6.1.4.1.4115.1.20.1.1.3.26 · 1 row entry · 5 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWPATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWPATable'
A table used to configure settings related to the WPA security modes.
arrisRouterWPAEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.26.1
An entry defining the WPA characteristics of an individual service set.
A row exists in this table for each row in the arrisRouterBSSTable for which
arrisRouterWiFiSecurityMode is set to wpaPsk(2), wpa2Psk(3), wpaEnterp…
Indexes
Column Syntax OID
Controls and reflects the WPA encryption mode used by the service set.
The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either
tkip(1) or aes(2).

The WPA algorithm for WPA2-PSK and WPA2…
Enumerationr/w
Enumerated Values:
1tkip
2aes
3tkipPlusAes
.1.3.6.1.4.1.4115.1.20.1.1.3.26.1.1
Sets the WPA Pre-Shared Key (PSK) used by this service set. This
value MUST be either a 64 byte hexadecimal number, OR an 8 to 63
character ASCII string.
OctetStringr/w
Constraints:
range: 8-64
.1.3.6.1.4.1.4115.1.20.1.1.3.26.1.2
Sets the WPA Group reauthentication interval for this service set. If set to zero,
it is disabled for this service set.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.26.1.4
Enable or disable WPA2 pre-authentication.
In preauthentication, a WPA2 wireless client can perform an 802.1X authentication with other wireless access points
in its range when it is still connected to its current wir…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.26.1.5
The default SSID (Service Set Identifier) set from the factory.
OctetString
Constraints:
range: 8-64
.1.3.6.1.4.1.4115.1.20.1.1.3.26.1.6
.1.3.6.1.4.1.4115.1.20.1.1.3.27 · 1 row entry · 5 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterRadiusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterRadiusTable'
A table used to configure settings related to the RADIUS security 
modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP.
arrisRouterRadiusEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.27.1
An entry defining the RADIUS characteristics of an individual service
set. A row exists in this table for each row in the arrisRouterBSSTable
for which arrisRouterWiFiSecurityMode is set to wpaEnterprise(4),
wpa2Ent…
Indexes
Column Syntax OID
The type of internet address used for arrisRouterRadiusAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.3.27.1.1
The internet address of the RADIUS server for this service set.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.3.27.1.2
The UDP port used to communicate with the RADIUS server for this
service set.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.27.1.3
The RADIUS key.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.3.27.1.4
The network re-authentication interval. If set to zero, no
re-authentication will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.27.1.5
.1.3.6.1.4.1.4115.1.20.1.1.3.28 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterMACAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterMACAccessTable'
A table of MAC addresses which defines the MAC address based access 
restrictions for the system.
arrisRouterMACAccessEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.28.1
A row in the table which specifies a single MAC address for a given
service set.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.3.28.1.1
A MAC address of a station which will be allowed to connect to the
service set if arrisRouterBssAccessMode is set to restrictToList(2), or
forbidden if arrisRouterBssAccessMode is set to denyList(3).
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.3.28.1.2
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.3.28.1.3
A name associated with device MAC which will be allowed to connect to the
service set if arrisRouterBssAccessMode is set to restrictToList(2), or
forbidden if arrisRouterBssAccessMode is set to denyList(3).
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.28.1.4
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4 · 1 row entry · 8 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWMMEDCAAPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWMMEDCAAPTable'
A table of for setting WMM EDCA values for the access point. 
This affects traffic flowing from the access point to the client station
arrisRouterWMMEDCAAPEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1
A table of for setting WMM EDCA values for the access point.
This affects traffic flowing from the access point to the client station
Column Syntax OID
The index into the table will be one of the parameters: 1=ACBE (best effort), 2=ACBK (background), 3=ACVI (video), 4=ACVO (voice)
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.1
Minimum Contention Window.
This parameter is input to the algorithm that determines the initial random backoff wait time (window) for retry of a transmission.
The value specified here in the Minimum Contention Window …
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.2
Maximum Contention Window. The value specified here in the Maximum Contention Window is the upper limit for the
doubling of the random backoff value. This doubling continues until either the data frame is sent or the
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.3
The Arbitration Inter-Frame Spacing Number specifies a wait time for data frames
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.4
Transmission Opportunity for b mode is an interval of time when a WME AP has the right to initiate
transmissions onto the wireless medium (WM). This value specifies the Transmission Opportunity (TXOP) for AP;
that is,…
microsecondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.5
Transmission Opportunity for A and G mode is an interval of time when a WME AP has the right to initiate
transmissions onto the wireless medium (WM). This value specifies the Transmission Opportunity (TXOP) for AP;
th…
microsecondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.6
Enable/disable admission control for specific category of traffic.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.7
Discard oldest packet first enable/disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.29.4.1.8
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3 · 1 row entry · 12 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWiFiScanResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWiFiScanResultTable'
A table of any WiFi Access points in the vicinity of the Arris product.
arrisRouterWiFiScanResultEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1
A table of any WiFi Access points in the vicinity of the Arris product.
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.1
The SSID for the wireless access point (WAP)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.2
The channel that the WAP is broadcasting on.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.3
The secondary channel that the WAP is broadcasting on. This may be 0 if the AP is only using 1 channel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.4
The Received Signal Strength Indication (RSSI) for the WAP.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.5
The 'noise' meausured for the WAP.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.6
The MAC identifier (AKA BSSID) of the WAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.7
The manufacturuer of the detected WAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.8
The supported rates of the WAP.
i.e. 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.9
The operating standards of the WAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.10
The security mode of the WAP.
Enumeration
Enumerated Values:
0unknow
1disabled
2wep
3wpa
4wpa2
5wpaWpa2
6wpaEnterprise
7wpa2Enterprise
8wpaWpa2Enterprise
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.11
The operating channel bandwidth of the WAP.
Enumeration
Enumerated Values:
0auto
1n20Mhz
2n40Mhz
3ac80Mhz
4ac160Mhz
.1.3.6.1.4.1.4115.1.20.1.1.3.39.3.1.12
.1.3.6.1.4.1.4115.1.20.1.1.3.42 · 1 row entry · 22 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWiFiClientInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWiFiClientInfoTable'
This table contains detailed information about currently connected wireless client devices.
arrisRouterWiFiClientInfoEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.42.1
Entry in the arrisRouterWiFiClientInfoTable.
Column Syntax OID
Index for the table.
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.1
Current IP address type for the wireless client device.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.2
Current IP address for the wireless client device.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.3
A human-readable textual representation of the arrisRouterWiFiClientInfoIPAddr.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.4
Hostname for the wireless client device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.5
MAC address of the wireless client device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.6
The manufacturer of the hardware adapter on the wireless client device.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.7
The most recent known status of the wireless client device.
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.8
The time, if known, when this client was first seen. For 'dynamic' clients,
this will usually be when the first DHCP lease was given out to this client since the last
boot. For 'staticDiscover' clients, this value will…
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.9
The time, if known, when this client was most recently (last) seen. If the device
has been disconnected or powered off this value will reflect that. If the device is currently
active, this value should match the current…
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.10
The number of seconds that this wireless client device has been idle.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.11
The number of seconds that this wireless client device has been in the network.
This value will be reset when the wireless client device is disconnected or powered off.
Thus this may not be equal to the elapsed time sin…
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.12
A string representing the current connection state of this wireless client device.
It will indicate if the device is: AUTHENTICATED, ASSOCIATED, and/or AUTHORIZED.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.13
A string representing the current various capability flags for this wireless
client device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.14
The number packets transmitted from this wireless client device since it was last connected.
packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.15
The number transmit packet failures from this wireless client device since it was last connected.
packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.16
The number of unicast packets received by this wireless client device since it was last connected.
packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.17
The number of multicast/broadcast packets received by this wireless client device since it was last connected.
packetsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.18
The transmission rate of the last packet transmitted from this wireless client device in kilobits-per-second.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.19
The reception rate of the last packet received by this wireless client device in kilobits-per-second.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.20
The supported rate set for this wireless client device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.21
The Received Signal Strength Indicator (RSSI) of the wireless client device. This value usually
displays as a negative, so a value closer to zero indicates more power.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.42.1.22
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4 · 1 row entry · 9 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterChannelStatsMeasurementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterChannelStatsMeasurementTable'
Table contains measurements for individual radio interfaces.
arrisRouterChannelStatsMeasurementEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1
Table contains measurements for individual radio interfaces.
Indexes
Column Syntax OID
The minimum noise floor (dBm) on the serving channel
across the measurement interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.1
The maximum noise floor(dBm) on the serving channel across
the measurement interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.2
The median noise floor (dBm) on the serving channel across
the measurement interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.3
Total number of packets transmitted out of the radio
across the measurement interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.4
Total number of packets received on the radio across the
measurement interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.5
Percentage of time the CST was exceeded across the radio
across the measurement interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.6
Percentage of air time the radio was actively utilizing
the channel across the measurement interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.7
Percentage of time the medium was utilized on the channel
across the measurement interval
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.8
Percentage of packets that had to be retransmitted the
measurement interval
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.4.1.9
.1.3.6.1.4.1.4115.1.20.1.1.3.62.5 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterChannelStatsRSSITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterChannelStatsRSSITable'
Table contains a histogram of client RSSI Values across 
the measurement interval.
arrisRouterChannelStatsRSSITableEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1
Column Syntax OID
Index used to order the ChannelStatsRSSITable entries.
Integer32
Constraints:
range: 1-40
.1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1.1
The RSSI Count for this 'bin'.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.62.5.1.2
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4 · 1 row entry · 8 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWMM50EDCAAPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWMM50EDCAAPTable'
A table of for setting WMM EDCA values for the access point. 
This affects traffic flowing from the access point to the client station
arrisRouterWMM50EDCAAPEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1
A table of for setting WMM EDCA values for the access point.
This affects traffic flowing from the access point to the client station
Column Syntax OID
The index into the table will be one of the parameters: 1=ACBE (best effort), 2=ACBK (background), 3=ACVI (video), 4=ACVO (voice)
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.1
Minimum Contention Window.
This parameter is input to the algorithm that determines the initial random backoff wait time (window) for retry of a transmission.
The value specified here in the Minimum Contention Window …
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.2
Maximum Contention Window. The value specified here in the Maximum Contention Window is the upper limit for the
doubling of the random backoff value. This doubling continues until either the data frame is sent or the
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.3
The Arbitration Inter-Frame Spacing Number specifies a wait time for data frames
millisecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.4
Transmission Opportunity for b mode is an interval of time when a WME AP has the right to initiate
transmissions onto the wireless medium (WM). This value specifies the Transmission Opportunity (TXOP) for AP;
that is,…
microsecondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.5
Transmission Opportunity for A and G mode is an interval of time when a WME AP has the right to initiate
transmissions onto the wireless medium (WM). This value specifies the Transmission Opportunity (TXOP) for AP;
th…
microsecondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.6
Enable/disable admission control for specific category of traffic.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.7
Discard oldest packet first enable/disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.3.63.4.1.8
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4 · 1 row entry · 5 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterBssStaSteeringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterBssStaSteeringTable'
Table containing BSS Steering Entries indexed by ifIndex.
arrisRouterBssStaSteeringEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1
Table containing STA Steering BSS Group entries.
Indexes
Column Syntax OID
Table index
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.1
0 - No Action
1 - Reset Table to defaults
2 - Clear ifIndex Client List
Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.2
Number of Association tries before allowing a STA
to join another BSS (Local config for this list).
Integer32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.3
Number of Seconds before Deny Count is reset (local config for list).
0 = Deny Window is disabled
Integer32r/w
Constraints:
range: 0-120
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.4
The status of this conceptual row.
To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are appropriately
configured, t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.3.69.4.1.5
.1.3.6.1.4.1.4115.1.20.1.1.3.69.5 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterBssStaSteeringClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterBssStaSteeringClientTable'
Station Entries Applied to the BSS Group
arrisRouterBssStaSteeringClientEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1
Station Entries for the BSS Group
Column Syntax OID
Table index
Integer32
Constraints:
range: 1-64
.1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.1
A MAC address of a station which has joined the BSS and should be steered to this BSS.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.2
The date and time when this Client Last Associated.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.3
Number of Times the Client was allowed to join another BSS
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.3.69.5.1.4
.1.3.6.1.4.1.4115.1.20.1.1.3.99.2 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterAirtimeCtrlBSSIDWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterAirtimeCtrlBSSIDWeightTable'
This table assigns bandwidth allocation percentage to the BSSID.
arrisRouterAirtimeCtrlBSSIDWeightEntry row .1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1
A row in the table of the arrisRouterAirtimeCtrlBSSIDMappingTable.
Indexes
Column Syntax OID
The minimum percentage of airtime allocated to the BSSID during periods of congestion.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1.1
The maximum percentage of airtime allocated to the BSSID during periods of non-congestion.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.4115.1.20.1.1.3.99.2.1.2
.1.3.6.1.4.1.4115.1.20.1.1.4.12 · 1 row entry · 11 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWVirtSrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWVirtSrvTable'
A table of 'virtual servers'. This allows for incoming requests on specific port numbers to reach web servers, 
FTP servers, mail servers, etc. so they can be accessible from the public internet.
arrisRouterFWVirtSrvEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.12.1
A table of 'virtual servers'. This allows for incoming requests on specific port numbers to reach web servers,
FTP servers, mail servers, etc. so they can be accessible from the public internet.
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.1
A textual description or name for this virtual server, i.e. My FTP
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.2
The beginning of the port range to forward to this virtual server.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.3
The end of the port range to forward to this virtual server.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.4
Specifies which protocol(s) are forwarded
Enumerationr/w
Enumerated Values:
0udp
1tcp
2both
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.5
Type of IP address on private network to forward to
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.6
IP address on private network to forward to
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.7
The beginning of the port range to forward to this virtual server.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.9
The end of the port range to forward to this virtual server.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.10
Row status to add/remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.11
The unique ID of Table
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.12.1.14
.1.3.6.1.4.1.4115.1.20.1.1.4.13 · 1 row entry · 13 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWIPFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWIPFilterTable'
A table of IP addresses to filter to block internet traffic to specific devices on the network.
arrisRouterFWIPFilterEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.13.1
A table of IP addresses to filter to block internet traffic to specific devices on the network.
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.1
A textual description or name for this filtering rule/row
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.2
Type of IP address for beginning of range on private network to filter
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.3
Beginning of IP address range on private network to filter. To block ports on all IPs use 0.0.0.0 (IPv4)
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.4
Type of IP address for end of range on private network to filter
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.5
End of IP address range on private network to filter. To block ports on all IPs use 0.0.0.0 (IPv4)
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.6
The beginning of the port range to filter.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.7
The end of the port range to filter.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.8
Specifies which protocol(s) are filtered
Enumerationr/w
Enumerated Values:
0udp
1tcp
2both
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.9
This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule.
Bits 0-6 correspond to Sunday-Saturday. Set the bit high (1) to enable this rule for the day of the week.
Bits 7-30 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.10
Row status to add/remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.11
Does rule allow or deny access
Enumerationr/w
Enumerated Values:
0allow
1deny
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.12
Does rule apply to incoming or outgoing packets
Enumerationr/w
Enumerated Values:
0incoming
1outgoing
.1.3.6.1.4.1.4115.1.20.1.1.4.13.1.13
.1.3.6.1.4.1.4115.1.20.1.1.4.15 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWMACFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWMACFilterTable'
A table of MAC addresses which are filtered/blocked by the firewall.
arrisRouterFWMACFilterEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.15.1
A table of MAC addresses which are blocked or allowed by the firewall. The behavior depends on arrisRouterFWAllowAll.
The ifIndex usually to be the Lan interface ifIndex, like 200.
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.4.15.1.1
A MAC address of a device on the local network which is filtered/blocked by the firewall.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.4.15.1.2
This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule.
Bits 0-6 correspond to Sunday-Saturday. Set the bit high (1) to enable this rule for the day of the week.
Bits 7-30 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.4.15.1.3
Row status to add/remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.15.1.4
.1.3.6.1.4.1.4115.1.20.1.1.4.16 · 1 row entry · 8 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWPortTrigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWPortTrigTable'
A table of port Trigs.  This allows configuration of dynamic triggers to specific devices on the Lan
This allows for special applications that require specific port numbers with bi-directional traffic to function properly. 
Applications such as video conferencing, voice, gaming, and some messenging program features may require these special settings
arrisRouterFWPortTrigEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.16.1
A table of port Trigs. This allows configuration of dynamic triggers to specific devices on the Lan
This allows for special applications that require specific port numbers with bi-directional traffic to function proper…
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.1
A textual description or name for this port trigger
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.2
The beginning of the trigger port range.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.3
The end of the trigger port range.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.4
The beginning of the target port range.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.5
The end of the target port range.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.6
Specifies which protocol(s) are filtered
Enumerationr/w
Enumerated Values:
0udp
1tcp
2both
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.7
Row status to add/remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.16.1.9
.1.3.6.1.4.1.4115.1.20.1.1.4.20.10 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterKeywordBlkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterKeywordBlkTable'
A table of keywords to block when web surfing
arrisRouterKeywordBlkEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1
A table of keywords to block when web surfing
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-50
.1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.1
The keyword to block.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.2
This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule.
Bits 0-6 correspond to Sunday-Saturday. Set the bit high (1) to enable this rule for the day of the week.
Bits 7-30 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.3
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.20.10.1.4
.1.3.6.1.4.1.4115.1.20.1.1.4.20.12 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterBlackListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterBlackListTable'
A table of domain names to block when web surfing
arrisRouterBlackListEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1
A table of domain names to block when web surfing
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.1
The domain to alway block - black listed.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.2
This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule.
Bits 0-6 correspond to Sunday-Saturday. Set the bit high (1) to enable this rule for the day of the week.
Bits 7-30 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.3
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.20.12.1.4
.1.3.6.1.4.1.4115.1.20.1.1.4.20.14 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWhiteListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWhiteListTable'
A table of domains to NEVER block when web surfing.
arrisRouterWhiteListEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1
A table of domains to NEVER block when web surfing.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.1
The domain to alway allow - White listed.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.2
This is a 32-bit bitmask that sets the time of day to apply and days of the week to apply this rule.
Bits 0-6 correspond to Sunday-Saturday. Set the bit high (1) to enable this rule for the day of the week.
Bits 7-30 …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.3
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.20.14.1.4
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16 · 1 row entry · 6 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterTrustedDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterTrustedDeviceTable'
A table of trusted devices which bypass parental controls.
arrisRouterTrustedDeviceEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1
A table of trusted devices which bypass parental controls.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-30
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.1
The MAC address of a device on the local network that bypasses parental controls.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.2
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.3
The name of a device on the local network that bypasses parental controls.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.4
IP address type for a device on the local network that bypasses parental controls.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.5
IP address for a device on the local network that bypasses parental controls.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.4.20.16.1.6
.1.3.6.1.4.1.4115.1.20.1.1.4.20.25 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterExceptionListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterExceptionListTable'
A table of domains to NEVER block when web surfing.
arrisRouterExceptionListEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1
A table of domains to NEVER block when web surfing.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.1
The domain to allow which is blocked by keyword - Exception listed.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.2
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.20.25.1.3
.1.3.6.1.4.1.4115.1.20.1.1.4.43 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWMacBridgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWMacBridgingTable'
A table of bridged device MAC addresses. Packets from or to these MACs are bridged directly from LAN to WAN, bypassing the normal routing.
arrisRouterFWMacBridgingEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.43.1
A table of MAC addresses. Device of these MACs in LAN are bridged directly from LAN to WAN, bypassing the normal routing.
Column Syntax OID
The index into the Mac Bridging table.
Integer32
Constraints:
range: 1-6
.1.3.6.1.4.1.4115.1.20.1.1.4.43.1.1
A textual description or name for this MAC.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.4.43.1.2
The MAC Address of LAN Device to be bridged directly from LAN to WAN.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.4.43.1.3
Row status to add/remove an arrisRouterFWMacBridgingTable entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.43.1.4
.1.3.6.1.4.1.4115.1.20.1.1.4.44 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFWPortAllowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFWPortAllowTable'
A table to allow IPV6 client to receive tcp packets with specified port
arrisRouterFWPortAllowEntry row .1.3.6.1.4.1.4115.1.20.1.1.4.44.1
A table to allow IPV6 client to receive tcp packets with specified port
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.4.44.1.1
The inbound tcp port which allowed to forward to v6 client
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4115.1.20.1.1.4.44.1.2
Row status to add/remove rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.4.44.1.3
.1.3.6.1.4.1.4115.1.20.1.1.5.16 · 1 row entry · 5 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterAuthTable'
Table contains information about web UI users, roles, and passwords.
arrisRouterAuthEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.16.1
Table contains information about web UI users, roles, and passwords.
Column Syntax OID
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.5.16.1.1
The user name.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.5.16.1.2
The password for the user.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.5.16.1.3
A string describing the type of user, i.e. technician, admin, standard, etc..
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4115.1.20.1.1.5.16.1.4
Get/set whether this account is disabled or enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4115.1.20.1.1.5.16.1.6
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4 · 1 row entry · 5 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterSNTPServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterSNTPServerTable'
A table of SNTP servers.
arrisRouterSNTPServerEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1
A table of SNTP servers.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.1
IP address type of Network Time Server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.2
IP address of Network Time Server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.3
Host name of Network Time Server.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.4
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.5.17.4.1.5
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFirewallLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFirewallLogTable'
A table of where each row represents an entry in the firewall log
arrisRouterFirewallLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1
A table of where each row represents an entry in the firewall log
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-30
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.1
Date and time when this event occurred.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.2
Event/log entry
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.1.1.3
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterParentalContLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterParentalContLogTable'
A table of where each row represents an entry in the parental control log
arrisRouterParentalContLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1
A table of where each row represents an entry in the parental control log
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-30
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.1
Date and time when this event occurred.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.2
Event/log entry
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.3
Indicates the type of log.
Integer32r/w
Constraints:
range: 0-3
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.2.1.4
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterChangeLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterChangeLogTable'
A table of where each row represents an entry in the user change log.  This is a log of configuration changes by the user.
arrisRouterChangeLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1
A table of where each row represents an entry in the user change log. This is a log of configuration changes by the user.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-40
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.1
Date and time when this event occurred.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.2
Event/log entry
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.3.1.3
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterDebugLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterDebugLogTable'
A table of where each row represents a debug log item.
arrisRouterDebugLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1
A table of where each row represents a debug log item.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.1
Date and time when this event occurred.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.2
Event/log entry
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.4.1.3
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFirewallLogExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFirewallLogExtTable'
An extended firewall log entry, it is only used for LGI at present.
arrisRouterFirewallLogExtEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1
An extended firewall log entry, it is only used for LGI at present.
Column Syntax OID
Indicates firewall log event type. It is only used for LGI at present.
1.TCP Port Scan
2.UDP Port Scan
3.SYN Flood
4.UDP Flood
5.ICMP Flood
Integer32
Constraints:
range: 1-5
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.1
Date and time of the latest event for each event type. It is only used for LGI at present.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.2
Event log entry of the latest event for each event type. It is only used for LGI at present.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.3
Indicates counter of the latest event for each event type. It is only used for LGI at present.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4115.1.20.1.1.5.19.1.7.1.4
.1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1 · 1 row entry · 3 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterMSOChgLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterMSOChgLogTable'
A table of where each row represents an entry in the MSO change log.  This is a log of configuration changes that are not done by the user.  
Assumed to be the MSO remotely or a technician.
arrisRouterMSOChgLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1
A table of where each row represents an entry in the MSO change log. This is a log of configuration changes that are not done by the user.
Assumed to be the MSO remotely or a technician.
Column Syntax OID
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-40
.1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.1
Date and time when this event occurred.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.2
Event/log entry
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.5.19.2.1.1.3
.1.3.6.1.4.1.4115.1.20.1.1.5.42 · 1 row entry · 2 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterInboundTrafficLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterInboundTrafficLogTable'
Table contains recent inbound packet headers
arrisRouterInboundTrafficLogEntry row .1.3.6.1.4.1.4115.1.20.1.1.5.42.1
Table contains recent inbound packet headers
Column Syntax OID
Index currently limit to 50.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.5.42.1.1
Raw IP/UDP/TCP Headers for packet (may have extra bytes beyond headers)
OctetString .1.3.6.1.4.1.4115.1.20.1.1.5.42.1.2
.1.3.6.1.4.1.4115.1.20.1.1.6.7 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterWebAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterWebAccessTable'
This table contains access levels for the web pages
arrisRouterWebAccessEntry row .1.3.6.1.4.1.4115.1.20.1.1.6.7.1
This table contains access levels for the web pages
Column Syntax OID
Index used to order the arrisRouterWebAccessTable entries.
Integer32
Constraints:
range: 1-50
.1.3.6.1.4.1.4115.1.20.1.1.6.7.1.1
The web page to grant access to. i.e. router.html or any unique string that identifies a 'screen' or 'page on the web UI
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.6.7.1.2
Access level for the web page
Enumerationr/w
Enumerated Values:
0noAccessAll
1accessTech
2accessUser
3accessAll
.1.3.6.1.4.1.4115.1.20.1.1.6.7.1.3
For creating new rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.6.7.1.4
.1.3.6.1.4.1.4115.1.20.1.1.10.2 · 1 row entry · 12 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterICtrlPortMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterICtrlPortMapTable'
This table contains IP port mappings.
arrisRouterICtrlPortMapEntry row .1.3.6.1.4.1.4115.1.20.1.1.10.2.1
This table contains IP port mappings
Column Syntax OID
Table index
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.1
Provides a descriptive human-readable string explaining the
usage of the port mapping. For example, Port 80 might be represented as
Web Server.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.2
This is the IP address type of the destination host that traffic assigned to this port from the WAN will be mapped to on the LAN.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.3
This is the IP address of the destination host that traffic assigned to this port from the WAN will be mapped to on the LAN.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.4
Can be 'UDP' or 'TCP'. Used to set the specific IP protocol type that this port is mapped for.
Enumerationr/w
Enumerated Values:
1tcp
2udp
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.5
The port number that an external host will connect to on the WAN side of the router that will be mapped
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.6
port number that will be used on the destination host
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.7
For creating new rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.8
start port number that will be used on the destination host
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.9
end port number that will be used on the destination host
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.10
The start port number that an external host will connect to on the WAN side of the router that will be mapped
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.11
The end port number that an external host will connect to on the WAN side of the router that will be mapped
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4115.1.20.1.1.10.2.1.12
.1.3.6.1.4.1.4115.1.20.1.1.11.10 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFlapListWLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFlapListWLANTable'
A table of WLAN Flapping Clients
arrisRouterFlapListWLANEntry row .1.3.6.1.4.1.4115.1.20.1.1.11.10.1
A table of WLAN Flap List Clients
Column Syntax OID
Indicates the instance of this table row.
Unsigned32
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.11.10.1.1
A MAC address of a WLAN station which has flapped.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.11.10.1.2
The date and time when this Client Last Flapped.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.11.10.1.3
The date and time when this Client can be removed from the List.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.11.10.1.4
.1.3.6.1.4.1.4115.1.20.1.1.11.11 · 1 row entry · 4 columns
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisRouterFlapListLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-ROUTER-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-ROUTER-DEVICE-MIB::arrisRouterFlapListLANTable'
A table of LAN Flapping Clients
arrisRouterFlapListLANEntry row .1.3.6.1.4.1.4115.1.20.1.1.11.11.1
A table of LAN Flap List Clients
Column Syntax OID
Indicates the instance of this table row.
Unsigned32
Constraints:
range: 0-64
.1.3.6.1.4.1.4115.1.20.1.1.11.11.1.1
The MAC address of a LAN Client which has flapped.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4115.1.20.1.1.11.11.1.2
The date and time when this Client Entry can be removed
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.11.11.1.3
The date and time when this Client Last Flapped.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.4115.1.20.1.1.11.11.1.4