arrisRouterRIPAuthEnable
ARRIS-ROUTER-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.20.1.1.2.5.2
Object
scalar
r/w
Enumeration
Enable/disable RIP authentication and type.
Context
- MIB
- ARRIS-ROUTER-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.20.1.1.2.5.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- arrisRouterRIPObjects
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | unknown |
0 | disable |
1 | textAuth |
2 | md5Auth |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisRouterRIPEnable Enable/disable RIP authentication. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.2.5.1 |
| arrisRouterRIPRoutedSubnetIPType The IP address type for arrisRouterRIPRoutedNetIP | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4115.1.20.1.1.2.5.10 |
| arrisRouterRIPRoutedSubnetIP The specific network in the configured subnet that will be adverstised and routed.
This feature allows for the configuration of a public LAN-side subnet of hosts which is not ne… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4115.1.20.1.1.2.5.11 |
| arrisRouterRIPRoutedSubnetGWNetIPType The IP address type for arrisRouterRIPRoutedNetIP | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4115.1.20.1.1.2.5.12 |
| arrisRouterRIPRoutedSubnetGWNetIP See the description of arrisRouterRIPRoutedNetIP. This is the Gateway IP address for the routable subnet. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4115.1.20.1.1.2.5.13 |
| arrisRouterRIPRoutedSubnetMask The subnet mask used for the routed subnet. This value will match arrisRouterRIPPrefixLen.
Usually prefixes are used with IPv6 and Netmasks are used with IPv4. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4115.1.20.1.1.2.5.14 |
| arrisRouterRIPRoutedSubnetEnabled If this is enabled, then we will advertise the RIP routed subnet network IP address with the next hop as the CM IP address. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.2.5.15 |
| arrisRouterRIPSendCMInterface If this is true/enabled, then RIP advertisements will be sent via the CM IP interface.
If this is false/disabled then RIP advertisements will be sent via the eRouter WAN IP inter… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.2.5.16 |
| arrisRouterRIPRoutedSubnetDHCP If this is true/enabled, then a DHCP server will be started on the device for the routed subnet.
If this is false/disabled then the DHCP server will not be started and all LAN-bas… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.2.5.17 |
| arrisRouterRIPRoutedSubnetNAT If this is true/enabled, then a the Routed Subnet will be NATed using the Gateway Ip Address
If this is false/disabled then the NAT will be disabled for the routed subnet. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4115.1.20.1.1.2.5.18 |
| arrisRouterRIPReportTime RIP reporting interval. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4115.1.20.1.1.2.5.3 |
| arrisRouterRIPAuthKeyString RIP authentication key. | scalar | OctetString | .1.3.6.1.4.1.4115.1.20.1.1.2.5.4 |
| arrisRouterRIPAuthKeyID RIP authentication key identifier. | scalar | Integer32 | .1.3.6.1.4.1.4115.1.20.1.1.2.5.5 |
| arrisRouterRIPIPAddrType RIP destination IP address type. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4115.1.20.1.1.2.5.6 |
| arrisRouterRIPIPAddr RIP unicast reporting destination IP address.
If this is configured to an ip address other than 0.0.0.0,
then the RIP messaging ( which is generally multicasted upstream ) will b… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4115.1.20.1.1.2.5.7 |
| arrisRouterRIPPrefixLen The prefix for the routed subnet. This value can be set or the value: arrisRouterRIPSubnetMask.
For additional details see the description for: arrisRouterRIPRoutedNetIP | scalar | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.4115.1.20.1.1.2.5.8 |
| arrisRouterRIPAuthKeyChain RIP authentication key chain. | scalar | OctetString | .1.3.6.1.4.1.4115.1.20.1.1.2.5.9 |