tmnxChassisUpgrade

ALCATEL-ENT1-TIMETRA-CHASSIS-MIB · .1.3.6.1.4.1.6527.3.1.2.2.1.3.1.18

Object

Setting this tmnxChassisUpgrade to 'doAction' causes an upgrade 
of all firmware and a reboot of the entire chassis including all 
the CPM and IOM cards.  
              
CAUTION: This upgrade and reboot may take several minutes to 
complete.  The chassis MUST NOT be reset or powered down, 
nor cards inserted or removed, during this process.  Any of
these prohibited actions may cause the cards to be rendered
inoperable.
              
tmnxChassisUpgrade and tmnxChassisReboot must be set
together in the same SNMP SET request PDU or else the SET request
will fail with an inconsistentValue error.
              
Note that the reboot action is likely to occur before the SNMP
SET response can be transmitted.

Context

MIB
ALCATEL-ENT1-TIMETRA-CHASSIS-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.18
Type
column
Access
readwrite
Status
current
Default
notApplicable
Parent
tmnxChassisEntry
Groups
2

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB::tmnxChassisUpgrade'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB::tmnxChassisUpgrade.<tmnxChassisIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-ENT1-TIMETRA-CHASSIS-MIB::tmnxChassisUpgrade'

Syntax

Source
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionType
Base type
Enumeration
Type Description
The TmnxActionType data type is an enumerated integer
that describes the values used to support action or
operation style commands.  Setting a variable of this
type to 'doAction' causes the action to occur.  GETs and
GETNEXTs on this variable return 'not-applicable'.

Values & Constraints

Type Values
1doAction
2notApplicable