ALCATEL-ENT1-TIMETRA-CHASSIS-MIB Table View

The chassis table has an entry for each chassis in the system.

tmnxChassisEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.3.1

Each row entry represents a chassis in the system. The agent
creates the row for the first chassis in the system, with
tmnxChassisIndex = 1, which is auto-discovered by the active CPM
card. Additional chassis entri…

Indexes

tmnxChassisIndex

Column	Syntax	OID
tmnxChassisIndex The unique value which identifies this chassis in the system. The first release of the product only supports a single chassis in the system.	TmnxChassisIndex Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.1
tmnxChassisRowStatus The row status. The creation or deletion of a chassis entry causes creation or deletion of corresponding entries in the tmnxCardTable with the same tmnxChassisIndex value. Note, the agent will disallow chassis dele…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.2
tmnxChassisName The administrative name assigned this chassis. Setting tmnxChassisName to the empty string, ''H, resets tmnxChassisName to the TiMOS default value.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.3
tmnxChassisType The type of chassis used in this Alcatel 7x50 system. The value of tmnxChassisType is the tmnxChassisTypeIndex for the entry in the tmnxChassisTypeTable that represents the Alcatel 7x50 SR series chassis model for thi…	TmnxChassisType	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.4
tmnxChassisLocation A user supplied string that indicates the on site location of this chassis. This could used for a Common Language Location Identifier, CLLI, code string if desired. A CLLI code is an 11-character stand…	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.5
tmnxChassisCoordinates A user supplied string that indicates the Global Positioning System (GPS) coordinates for the location of this chassis. N 45 58 23, W 34 56 12 N37 37' 00 latitude, W122 22' 00 longitude N36*39.24…	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.6
tmnxChassisNumSlots The number of slots in this chassis that are available for plug-in cards. This includes both fabric and IOM cards	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.7
tmnxChassisNumPorts The total number of ports currently installed in this chassis. This count does not include the Ethernet ports on the CPM cards that are used for management access.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.8
tmnxChassisNumPwrSupplies The total number of power supplies installed in this chassis.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.9
tmnxChassisNumFanTrays The total number of fan trays installed in this chassis.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.10
tmnxChassisNumFans The total number of fans installed in this chassis.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.11
tmnxChassisCriticalLEDState The current state of the Critical LED in this chassis.	TmnxLEDState Type Values: 1 ledOff 2 ledRed 3 ledAmber 4 ledYellow 5 ledGreen 6 ledAmberBlink 7 ledYellowBlink 8 ledGreenBlink	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.12
tmnxChassisMajorLEDState The current state of the Major LED in this chassis.	TmnxLEDState Type Values: 1 ledOff 2 ledRed 3 ledAmber 4 ledYellow 5 ledGreen 6 ledAmberBlink 7 ledYellowBlink 8 ledGreenBlink	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.13
tmnxChassisMinorLEDState The current state of the Minor LED in this chassis.	TmnxLEDState Type Values: 1 ledOff 2 ledRed 3 ledAmber 4 ledYellow 5 ledGreen 6 ledAmberBlink 7 ledYellowBlink 8 ledGreenBlink	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.14
tmnxChassisBaseMacAddress The base chassis ethernet MAC address. Special purpose MAC addresses used by the system software are constructed as offsets from this base address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.15
tmnxChassisCLLICode A Common Language Location Identifier (CLLI) code is an 11-character standardized geographic identifier that uniquely identifies the geographic location of places and certain functional categories of equipment unique…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.16
tmnxChassisReboot Setting this tmnxChassisReboot to 'doAction' causes a soft-reboot of the entire chassis including all the CPM and IOM cards. Note that the reboot action is likely to occur before the SNMP SET response ca…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.17
tmnxChassisUpgrade Setting this tmnxChassisUpgrade to 'doAction' causes an upgrade of all firmware and a reboot of the entire chassis including all the CPM and IOM cards. CAUTION: This upgrade and reboot may take severa…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.18
tmnxChassisAdminMode The value of tmnxChassisAdminMode specifies the scaling and feature set for the IOM cards in the chassis. Setting this variable to 'modeA' causes all IOM cards in the chassis to use the scaling and feature sets suppor…	TmnxChassisModer/w Type Values: 1 modeA 2 modeB 3 modeC	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.19
tmnxChassisOperMode The value of tmnxChassisOperMode indicates the operational scaling and feature set for the IOM cards in the chassis. Changing the value of tmnxChassisAdminMode from 'modeB' to 'modeA' (downgrade) will result in tmnxCh…	TmnxChassisMode Type Values: 1 modeA 2 modeB 3 modeC	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.20
tmnxChassisModeForce Setting tmnxChassisModeForce to a value of 'doAction' in the same SNMP SET request where tmnxChassisAdminMode is set to 'modeB' allows the chassis to be upgraded to 'modeB' even if there are IOM cards in the chassis wi…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.21
tmnxChassisUpdateWaitTimeobsolete The value of tmnxChassisUpdateWaitTime specifies the time to wait before rebooting IOM cards running older software versions following a software upgrade or downgrade activity switchover. This object was obsoleted in r…	secondsUnsigned32r/w Constraints: range: 15-600	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.22
tmnxChassisUpdateTimeLeft Following a software upgrade or downgrade activity switchover, the value of tmnxChassisUpdateTimeLeft indicates the time remaining before IOM cards or MDAs running older software versions will be rebooted.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.23
tmnxChassisOverTempState The current Over Temperature state of this chassis. stateOk Indicates chassis is below the temperature threshold. stateOverTemp Indicates chassis is above the temperature threshold.	Enumeration Enumerated Values: 1 stateOk 2 stateOverTemp	.1.3.6.1.4.1.6527.3.1.2.2.1.3.1.24

This table contains information about fan trays.

tmnxChassisFanEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.4.1

Contains information regarding a fan tray.

Indexes

tmnxChassisIndex tmnxChassisFanIndex

Column	Syntax	OID
tmnxChassisFanIndex The unique value which identifies a specific fan tray in the chassis.	Unsigned32 Constraints: range: 1-31	.1.3.6.1.4.1.6527.3.1.2.2.1.4.1.1
tmnxChassisFanOperStatus Current status of the Fan tray.	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.4.1.2
tmnxChassisFanSpeed The value of tmnxChassisFanSpeed indicates if the fans in this fan tray are running at 'halfSpeed' or 'fullSpeed'.	Enumeration Enumerated Values: 1 unknown 2 halfSpeed 3 fullSpeed	.1.3.6.1.4.1.6527.3.1.2.2.1.4.1.3

This table contains information about power supply trays.

tmnxChassisPowerSupplyEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.5.1

Contains information regarding a power supply tray.

Indexes

tmnxChassisIndex tmnxChassisPowerSupplyId

Column	Syntax	OID
tmnxChassisPowerSupplyId The unique identifier index for a power supply tray in the chassis.	Unsigned32 Constraints: range: 1-31	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.1
tmnxChassisPowerSupplyACStatus If the value of tmnxChassisPowerSupplyACStatus is 'deviceStateOk', the input AC voltage is within range. If the value is 'deviceStateFailed', an AC voltage out of range condition has been detected. A value of 'devic…	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.2
tmnxChassisPowerSupplyDCStatus If the value of tmnxChassisPowerSupplyDCStatus is 'deviceStateOk', the input DC voltage is within range. If the value is 'deviceStateFailed', an DC voltage out of range condition has been detected. A value of 'devic…	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.3
tmnxChassisPowerSupplyTempStatus If the value of tmnxChassisPowerSupplyTempStatus is 'deviceStateOk', the current temperature is within acceptable range. If the value is 'deviceStateFailed', a temperature too high condition has been detected.	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.4
tmnxChassisPowerSupplyTempThreshold The temperature threshold for this power supply tray in degrees celsius. When the temperature raises above tmnxChassisPowerSupplyTempThreshold, a 'temperature too high' event will be generated.	degrees celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.5
tmnxChassisPowerSupply1Status The overall status of an equipped power supply. For AC multiple power supplies, this represents the overall status of the first power supply in the tray (or shelf). For any other type, this represents the overall status…	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.6
tmnxChassisPowerSupply2Status The overall status of an equipped power supply. For AC multiple power supplies, this represents the overall status of the second power supply in the tray (or shelf). For any other type, this field is unused and set to …	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.7
tmnxChassisPowerSupplyAssignedType tmnxChassisPowerSupplyAssignedType configures the type of power supply for a platform. Based on the value assigned to this object, various power supply monitoring signals will be interpreted. For example, if a platfo…	Enumerationr/w Enumerated Values: 0 none 1 dc 2 acSingle 3 acMultiple	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.8
tmnxChassisPowerSupplyInputStatus If the value of tmnxChassisPowerSupplyInputStatus is 'deviceStateOk', the input voltage of the power supply is within range. If the value is 'deviceStateFailed', an input voltage out of range condition has been dete…	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.9
tmnxChassisPowerSupplyOutputStatus If the value of tmnxChassisPowerSupplyOutputStatus is 'deviceStateOk', the output voltage of the power supply is within range. If the value is 'deviceStateFailed', an output voltage out of range condition has been d…	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.5.1.10

The chassis type table has an entry for each Alcatel 7x50 SR series
chassis model.

tmnxChassisTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.6.1

Each row entry represents an Alcatel 7x50 SR series Chassis model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.

Indexes

tmnxChassisTypeIndex

Column	Syntax	OID
tmnxChassisTypeIndex The unique index value which identifies this type of Alcatel 7x50 SR series chassis model.	TmnxChassisType	.1.3.6.1.4.1.6527.3.1.2.2.1.6.1.1
tmnxChassisTypeName The administrative name that identifies this type of Alcatel 7x50 SR series chassis model. This name string may be used in CLI commands to specify a particular chassis model type.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.1.6.1.2
tmnxChassisTypeDescription A detailed description of this Alcatel 7x50 SR series chassis model.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.1.6.1.3
tmnxChassisTypeStatus When tmnxChassisTypeStatus has a value of 'true' it indicates that this chassis model is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.1.6.1.4

The tmnxHwTable has an entry for each managed hardware component 
in the Alcatel 7x50 SR series system's chassis.  Examples of 
these hardware component types are IOM, Fabric, and CPM cards,
MCM and CCM, and MDA modules.  Similar information for physical ports
is in the tmnxPortObjs.

tmnxHwEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.8.1

Each row entry represents an Alcatel 7x50 SR series manufactured
hardware component. Entries cannot be created and deleted via
SNMP SET operations. When an entry is created in one of the
card tables, IOM, CPM, Fabr…

Indexes

tmnxChassisIndex tmnxHwIndex

Column	Syntax	OID
tmnxHwIndex The value of tmnxHwIndex is a unique index that identifies common management information for Alcatel 7x50 SR series manufactured hardware components within the specified chassis.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.1
tmnxHwID The value of tmnxHwID is an object identifier that points to the table and row entry with additional management information specific to this hardware component's class.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.2
tmnxHwMfgString The tmnxHwMfgString contains unspecified Alcatel 7x50 SR series manufacturing information and includes the Alcatel vendor information.	OctetString Constraints: range: 0-253	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.3
tmnxHwMfgBoardNumber The tmnxHwMfgBoardNumber contains the part number information.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.4
tmnxHwSerialNumber The unique Alcatel 7x50 SR series serial number of the hardware component.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.5
tmnxHwManufactureDate The manufacturing date of the hardware component in 'mmddyyyy' ascii format.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.6
tmnxHwClass The value of tmnxHwClass indicates the general hardware type of this component. If no appropriate enumeration exists for this hardware component then the value 'other (1)' is used. If the agent cannot identify this…	TmnxHwClass Type Values: 1 other 2 unknown 3 chassis 4 container 5 powerSupply 6 fan 7 sensor 8 ioModule 9 cpmModule 10 fabricModule 11 mdaModule 12 flashDiskModule 13 port 14 mcm 15 ccm	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.7
tmnxHwName The value of tmnxHwName is the name of the component as assigned by the system software itself and is suitable for use in CLI commands. This may be a text name such as 'console' or a port ID such as '2/2'. …	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.8
tmnxHwAlias The value of tmnxHwAlias is the administrative name assigned to this hardware component by the CLI user or network manager. It is saved across re-initializations and reboots of the system.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.9
tmnxHwAssetID The value of tmnxHwAssetID is an administratively assigned asset tracking identifier for this hardware component. It is saved across re-initializations and reboots of the system. If no asset tracking information is as…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.10
tmnxHwCLEI The Common Language Equipment Identifier, CLEI, code is a unique 10-character identifier, that is fixed by the manufacturer. It consists of ten alphanumeric characters. The first seven characters present a concise …	OctetString Constraints: range: 10-10	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.11
tmnxHwIsFRU The value of tmnxHwIsFRU indicates whether or not this hardware component is a Field Replaceable Unit (FRU) or not. Those components that are permanently contained within a FRU have a value of 'false'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.12
tmnxHwContainedIn The value of tmnxHwContainedIn is the tmnxHwIndex value for the row entry of the hardware component that contains this component. A value of zero indicates that this component is not contained in any other component.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.13
tmnxHwParentRelPos The value of tmnxHwParentRelPos indicates the relative position of this hardware component among all its 'sibling' components. A sibling component shares the same instance values for tmnxHwContainedIn and tmnxHwClass o…	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.14
tmnxHwAdminState The desired administrative status of this hardware component. Write access will be denied for those components that do not have administrative status. An attempt to set tmnxHwAdminState to 'operateSwitch (5)' will …	Enumerationr/w Enumerated Values: 1 noop 2 inService 3 outOfService 4 diagnose 5 operateSwitch	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.15
tmnxHwOperState The actual operational status of this hardware component. unknown (1) Status cannot be determined inService (2) Online - If tmnxHwClass has a value of …	Enumeration Enumerated Values: 1 unknown 2 inService 3 outOfService 4 diagnosing 5 failed 6 booting 7 empty 8 provisioned 9 unprovisioned 10 upgrade 11 downgrade 12 inServiceUpgrade 13 inServiceDowngrade 14 resetPending	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16
tmnxHwTempSensor The value of tmnxHwTempSensor indicates whether or not this hardware component contains a temperature sensor.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.17
tmnxHwTemperature The current temperature reading in degrees celsius from this hardware component's temperature sensor. If this component does not contain a temperature sensor, then the value -1 is returned.	degrees celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.18
tmnxHwTempThreshold The temperature threshold for this hardware component in degrees celsius. When the value of tmnxHwTemperature raises above tmnxHwTempThreshold, a 'temperature too high' event will be generated.	degrees celsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.19
tmnxHwBootCodeVersion The version number of boot eprom on the card in this slot. If no specific software program is associated with this hardware component then this object will contain a zero length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.20
tmnxHwSoftwareCodeVersion The software product release version number for the software image currently running on this IOM or CPM card. If no specific software program is associated with this hardware component then this object w…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.21
tmnxHwSwLastBoot The date and time the software running on this IOM or CPM card was last rebooted. If this row entry represents a standby CPM card, the date and time indicated is when the standby completed its initial …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.22
tmnxHwSwStateobsolete The state of the software running on this IOM or CPM card. The tmnxHwSwState object is obsolete. The Alcatel 7x50 platform cannot distinguish software status separate from the hardware status. Instead o…	Enumeration Enumerated Values: 0 unknown 1 hwFailure 2 swFailure 3 hwInitting 4 swDownloading 5 swInitting 6 swInitted 7 swRunning	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.23
tmnxHwAlarmState The value of tmnxHwAlarmState indicates the current alarm state for this hardware component.	TmnxAlarmState Type Values: 0 unknown 1 alarmActive 2 alarmCleared	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.24
tmnxHwLastAlarmEvent The value of tmnxHwLastAlarmEvent is an object identifier whose object name and instance values point to the row entry in the ALARM-MIB that contains the most recent alarm event associated with this hardware component…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.25
tmnxHwClearAlarms Setting this action variable causes all the active alarms associated with this hardware component to be moved from the ALARM-MIB nlmActiveAlarmTable to the nlmClearedAlarmTable. This action button is primarily meant …	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.26
tmnxHwSwImageSource The value of tmnxHwSwImageSource indicates the location in the Boot Options File (BOF) where the software image file was found when the system last rebooted.	Enumeration Enumerated Values: 0 unknown 1 primary 2 secondary 3 tertiary	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.27
tmnxHwMfgDeviations tmnxHwMfgDeviations contains a record of changes done by the manufacturing to the hardware or software and which is outside the normal revision control process.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.28
tmnxHwBaseMacAddress tmnxHwBaseMacAddress contains the base MAC address of the hardware component. It is applicable only if tmnxHwClass is of type 'chassis', 'ioModule', 'cpmModule' or 'mdaModule'.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.29
tmnxHwFailureReason tmnxHwFailureReason indicates the reason why a hardware component 'failed' as indicated in tmnxHwOperState.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.1.8.1.30

The tmnxHwContainsTable shows the container/containee relationship
between entries in the tmnxHwTable.  The hardware component
containment tree can be constructed from information in the
tmnxHwTable, but this table provides the information in a more
convenient format for the manager system to use.

tmnxHwContainsEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.9.1

Each row entry represents a single container/containee relationship.
Entries cannot be created and deleted via SNMP SET operations.

Indexes

tmnxHwIndex tmnxHwContainedIndex

Column	Syntax	OID
tmnxHwContainedIndex The value of tmnxHwIndex for the contained hardware component.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.9.1.1

This table contains information about CCM.

tmnxCcmEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.10.1

Contains information regarding a CCM.

Indexes

tmnxChassisIndex tmnxCcmIndex

Column	Syntax	OID
tmnxCcmIndex The unique value which identifies a specific CCM instance in the chassis.	Unsigned32 Constraints: range: 1-8	.1.3.6.1.4.1.6527.3.1.2.2.1.10.1.1
tmnxCcmOperStatus Current status of the CCM.	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.1.10.1.2
tmnxCcmHwIndex The value of tmnxCcmHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this CCM.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.1.10.1.3
tmnxCcmEquippedType A bit-mask that identifies the CCM type that is physically inserted into this chassis. There will not be more than one bit set at a time in tmnxCcmEquippedType.	TmnxCcmType	.1.3.6.1.4.1.6527.3.1.2.2.1.10.1.4

The card type table has an entry for each Alcatel 7710 series
Chassis Control Module (CCM) model.

tmnxCcmTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.1.11.1

Each row entry represents an Alcatel 7710 series CCM model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.

Indexes

tmnxCcmTypeIndex

Column	Syntax	OID
tmnxCcmTypeIndex The unique index value which identifies this type of Alcatel 7710 series CCM model.	TmnxCcmType	.1.3.6.1.4.1.6527.3.1.2.2.1.11.1.1
tmnxCcmTypeName The administrative name that identifies this type of Alcatel 7710 series CCM model. This name string may be used in CLI commands to specify a particular card model type.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.1.11.1.2
tmnxCcmTypeDescription A detailed description of this Alcatel 7710 series CCM model.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.1.11.1.3
tmnxCcmTypeStatus When tmnxCcmTypeStatus has a value of 'true' it indicates that this CCM is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.1.11.1.4

The tmnxCardTable has an entry for each IOM card slot in each 
chassis in the TMNX system.

tmnxCardEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.2.1

Each row entry represents an IOM card slot in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. When a tmnxChassisEntry is created, a tmnxCardEntry
is created for each IOM card…

Indexes

tmnxChassisIndex tmnxCardSlotNum

Column	Syntax	OID
tmnxCardSlotNum The unique value which identifies this IOM slot within a chassis in the system.	TmnxSlotNum Type Constraints: range: 1..128	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.1
tmnxCardSupportedTypes A bit-mask that specifies what card types can be physically supported in this IOM slot in this chassis.	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.2
tmnxCardAllowedTypesobsolete A bit-mask that specifies what IOM card types the administrator has designated be allowed to be inserted into this slot. If the slot has not-been pre-provisioned and a card that does not match one of the allowed types i…	TmnxCardTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.3
tmnxCardAssignedType A bit-mask that identifies the administratively assigned (pre-provisioned) IOM card type that should occupy this slot in this chassis. If tmnxCardAssignedType has a value of 'unassigned', this slot has not yet been …	TmnxCardTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.4
tmnxCardEquippedType A bit-mask that identifies the IOM card type that is physically inserted into this slot in this chassis. If the slot has been pre-provisioned, tmnxCardAssignedType is not equal 'unassigned', and the value of tmnxCar…	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.5
tmnxCardHwIndex The value of tmnxCardHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this IOM card.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.6
tmnxCardClockSource The clock source used by the IOM card in this slot.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.10
tmnxCardNumMdaSlots The number of Media Dependent Adapter (MDA) slots available on this IOM card.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.11
tmnxCardNumMdas The number of Media Dependent Adapters installed on this IOM card.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.12
tmnxCardReboot Setting this variable to 'doAction' causes the IOM card to execute a soft-reboot.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.13
tmnxCardMemorySize The value of tmnxCardMemorySize indicates the amount of memory, in mega-bytes, populated on this IOM card.	Mega-bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.14
tmnxCardNamedPoolAdminMode The value of tmnxCardNamedPoolAdminMode specifies whether or not an IOM is provisioned for the configuration of named pools. If the value of tmnxCardNamedPoolAdminMode is 'inService(2)', the system will change the way …	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.15
tmnxCardNamedPoolOperMode The value of tmnxCardNamedPoolOperMode specifies whether or not an IOM provisioned with tmnxCardNamedPoolAdminMode to a value of 'inService(2)' will activly use named pools or not. A value of 'outOfService(3) means th…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminState Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.2.3.2.1.16

The tmnxCpmCardTable has an entry for each CPM card or module in 
each chassis in the TMNX system.

tmnxCpmCardEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.4.1

Each row entry represents a CPM card or module in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. When a tmnxChassisEntry is created, a tmnxCpmCardEntry
is created for each C…

Indexes

tmnxChassisIndex tmnxCpmCardSlotNum tmnxCpmCardNum

Column	Syntax	OID
tmnxCpmCardSlotNum The unique value which identifies this slot within a chassis in the system. Depending upon the value of tmnxChassisType, this may represent a fabric slot or a regular card slot. If this CPM module resides on a fabr…	TmnxSlotNum Type Constraints: range: 1..128	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.1
tmnxCpmCardNum The unique value which identifies this CPM module within a specific card slot within a chassis in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.2
tmnxCpmCardSupportedTypes A bit-mask that specifies what CPM card types can be physically supported in this slot in this chassis.	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.3
tmnxCpmCardAllowedTypesobsolete A bit-mask that specifies what CPM card types the administrator has designated be allowed to be inserted into this slot. If the slot has not-been pre-provisioned and a card that does not match one of the allowed type…	TmnxCardTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.4
tmnxCpmCardAssignedType A bit-mask that identifies the administratively assigned (pre-provisioned) CPM card type that should occupy this slot in this chassis. If tmnxCpmCardAssignedType has a value of 'unassigned', this slot has not yet be…	TmnxCardTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.5
tmnxCpmCardEquippedType A bit-mask that identifies the CPM card type that is physically inserted into this slot in this chassis. If the slot has been pre-provisioned, tmnxCpmCardAssignedType is not equal 'unassigned', and the value of tmnx…	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.6
tmnxCpmCardHwIndex The value of tmnxCpmCardHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this CPM card or module.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.7
tmnxCpmCardBootOptionVersion The version number of boot option file (BOF) read by the CPM card in this slot.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.8
tmnxCpmCardBootOptionLastModified The date and time the boot options file (BOF) for this card was last modified. If tmnxCpmCardBootOptionLastModified is more recent than tmnxHwSwLastBoot, the boot options file has been edited since the software was …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.9
tmnxCpmCardConfigBootedVersion The version of the configuration file read when this CPM card was last rebooted.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.10
tmnxCpmCardIndexBootedVersion The version of the index file read when this CPM card was last rebooted.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.11
tmnxCpmCardConfigLastModified The date and time the running configuration was last modified. If tmnxCpmCardConfigLastModified is more recent than tmnxHwSwLastBoot, the current configuration may be different than that in the configuration file read …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.12
tmnxCpmCardConfigLastSaved The date and time the current configuration was last saved. If tmnxCpmCardConfigLastSaved is more recent the value of tmnxHwSwLastBoot, the initial configuration is likely to be different the next time the system is r…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.13
tmnxCpmCardRedundant This variable indicates if the CPM card is standalone or part of a pair of redundant cards. If 'redundantDisabled', tmnxHwOperState indicates the specific reason why this redundant CPM card is not available. …	Enumeration Enumerated Values: 1 singleton 2 redundantActive 3 redundantStandby 4 redundantSplit 5 redundantDisabled 6 redundantSynching	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.14
tmnxCpmCardClockSource The clock source used by the CPM card in this slot.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.15
tmnxCpmCardNumCpus The value of tmnxCpmCardNumCpus indicates the number of CPU chips populated on this CPM module.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.16
tmnxCpmCardCpuType The value of tmnxCpmCardCpuType indicates the type of CPU chips populated on this CPM module.	Enumeration Enumerated Values: 1 unknown 2 mips 3 pentium-pc	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.17
tmnxCpmCardMemorySize The value of tmnxCpmCardMemorySize indicates the amount of memory, in mega-bytes, populated on this CPM module.	Mega-bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.18
tmnxCpmCardSwitchToRedundantCard Setting this variable to doAction causes the switchover to the redundant CPM card.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.19
tmnxCpmCardReboot Setting this variable to 'doAction' causes the CPM card to execute a soft-reboot.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.20
tmnxCpmCardRereadBootOptions Setting this variable to 'doAction' causes the Boot Options File (BOF) to be reread and applied.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.21
tmnxCpmCardConfigFileLastBooted tmnxCpmCardConfigFileLastBooted indicates the location and name of the configuration file from which the system last rebooted.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.22
tmnxCpmCardConfigFileLastSaved tmnxCpmCardConfigFileLastSaved indicates the location and name of the file to which the configuration was last saved.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.23
tmnxCpmCardConfigFileLastBootedHeader tmnxCpmCardConfigFileLastBootedHeader contains the header of the configuration file from which the system last rebooted.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.24
tmnxCpmCardIndexFileLastBootedHeader tmnxCpmCardIndexFileLastBootedHeader contains the header of the index file from which the system last rebooted.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.25
tmnxCpmCardBootOptionSource tmnxCpmCardBootOptionSource indicates the compact flash slot where the Boot Options File (BOF) file was found when the system last rebooted. For example, if the BOF file was found on compact flash slot 1, the value of t…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.26
tmnxCpmCardConfigSource The value of tmnxCpmCardConfigSource indicates the location in the Boot Options File(BOF) where the configuration file was found when the system last rebooted.	Enumeration Enumerated Values: 0 unknown 1 primary 2 secondary 3 tertiary	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.27
tmnxCpmCardBootOptionLastSaved The date and time the boot options file (BOF) was last saved. If tmnxCpmCardBootOptionLastSaved is more recent than the value of tmnxHwSwLastBoot, the boot options file has been edited since the software was booted and …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.28
tmnxCpmCardMasterSlaveRefState The current Master/Slave clocking reference designation. primaryRef Indicates this card is designated as the primary clocking reference in a redundant system. secondaryRef Indic…	Enumeration Enumerated Values: 1 primaryRef 2 secondaryRef 3 notInitialized	.1.3.6.1.4.1.6527.3.1.2.2.3.4.1.30

The tmnxFabricTable has an entry for each fabric card slot in 
each chassis in the TMNX system.

tmnxFabricEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.6.1

Each row entry represents a fabric card slot in a chassis in
the system. Entries cannot be created and deleted via
SNMP SET operations. When a tmnxChassisEntry is created,
a tmnxFabricEntry is created for each fabric…

Indexes

tmnxChassisIndex tmnxFabricSlotNum

Column	Syntax	OID
tmnxFabricSlotNum The unique value which identifies this fabric slot within a chassis in the system. The CPM cards and IOM cards cannot be physically inserted into the switch fabric card slots. In some models, the CPM is not a separate …	Unsigned32 Constraints: range: 1-16	.1.3.6.1.4.1.6527.3.1.2.2.3.6.1.1
tmnxFabricAssignedType The administratively assigned switch fabric card type that should occupy this fabric slot in this chassis.	TmnxCardTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.6.1.2
tmnxFabricEquippedType The switch fabric card type that is physically inserted into this slot in this chassis.	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.6.1.3
tmnxFabricHwIndex The value of tmnxHwIndex is the index into the tmnxHwTable to locate the row entry that represents the hardware component information for this fabric card.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.6.1.4

This table contains information about Flash devices on a CPM card.

tmnxCpmFlashEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.7.1

Contains information regarding a CPM card's flash unit.

Indexes

tmnxChassisIndex tmnxCardSlotNum tmnxCpmFlashId

Column	Syntax	OID
tmnxCpmFlashId The unique identifier index for a flash device on a CPM card.	Unsigned32 Constraints: range: 1-32	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.1
tmnxCpmFlashOperStatus Current status of this flash unit on this CPM card.	TmnxDeviceState Type Values: 1 deviceStateUnknown 2 deviceNotEquipped 3 deviceStateOk 4 deviceStateFailed 5 deviceStateOutOfService	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.2
tmnxCpmFlashSerialNumber The serial number for this flash unit on this CPM card.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.3
tmnxCpmFlashFirmwareRevision The firmware revision number for this flash unit on this CPM card.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.4
tmnxCpmFlashModelNumber The model number for this flash unit on this CPM card.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.5
tmnxCpmFlashCapacity The value of tmnxCpmFlashCapacity indicates the maximum size of this flash unit in 512-byte sectors.	sectorsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.6
tmnxCpmFlashUsed The value of tmnxCpmFlashUsed indicates the amount used, in 512-byte sectors, of this flash unit's total capacity.	sectorsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.7
tmnxCpmFlashHwIndex The value of tmnxHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this flash unit.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.7.1.8

The tmnxMDATable has an entry for each MDA slot in each IOM
card in this chassis in the TMNX system.

tmnxMDAEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.8.1

Each row entry represents a MDA slot in an IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. When a tmnxCardEntry
has tmnxCardAssignedType or tmnxCardEquippedType eq…

Indexes

tmnxChassisIndex tmnxCardSlotNum tmnxMDASlotNum

Column	Syntax	OID
tmnxMDASlotNum The unique value which identifies this MDA slot within a specific IOM card in the system. Rows with a tmnxMDASlotNum value of zero (0) represent the special case of an IOM card without MDA slots but that instead has it…	Unsigned32 Constraints: range: 0-16	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.1
tmnxMDASupportedTypes A bit-mask that specifies what MDA card types can be physically supported in this slot in this chassis.	TmnxMDASuppType Type Values: 0 invalid-MDA-type 1 unassigned 2 supp-MDA-type-2 3 supp-MDA-type-3 4 supp-MDA-type-4 5 supp-MDA-type-5 6 supp-MDA-type-6 7 supp-MDA-type-7 8 supp-MDA-type-8 9 supp-MDA-type-9 10 supp-MDA-type-10 11 supp-MDA-type-11 12 supp-MDA-type-12 13 supp-MDA-type-13 14 supp-MDA-type-14 15 supp-MDA-type-15 16 supp-MDA-type-16 17 supp-MDA-type-17 18 supp-MDA-type-18 19 supp-MDA-type-19 20 supp-MDA-type-20 21 supp-MDA-type-21 22 supp-MDA-type-22 23 supp-MDA-type-23 24 supp-MDA-type-24 25 supp-MDA-type-25 26 supp-MDA-type-26 27 supp-MDA-type-27 28 supp-MDA-type-28 29 supp-MDA-type-29 30 supp-MDA-type-30 31 supp-MDA-type-31 32 supp-MDA-type-32 33 supp-MDA-type-33 34 supp-MDA-type-34 35 supp-MDA-type-35 36 supp-MDA-type-36 37 supp-MDA-type-37 38 supp-MDA-type-38 39 supp-MDA-type-39 40 supp-MDA-type-40 41 supp-MDA-type-41 42 supp-MDA-type-42 43 supp-MDA-type-43 44 supp-MDA-type-44 45 supp-MDA-type-45 46 supp-MDA-type-46 47 supp-MDA-type-47	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.2
tmnxMDAAllowedTypesobsolete An integer that specified what MDA card types the administrator has designated be allowed to be inserted into this slot. If the slot has not-been pre-provisioned and a MDA card that does not match one of the allowed typ…	TmnxMdaTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.3
tmnxMDAAssignedType An integer that indicates the administratively assigned (pre-provisioned) MDA card type that should occupy this slot in this chassis. If tmnxMDAAssignedType has a value of 'unassigned', this slot has not yet been pr…	TmnxMdaTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.4
tmnxMDAEquippedType An integer that indicates the MDA card type that is physically inserted into this slot in this chassis. If the slot has been pre-provisioned, tmnxMDAAssignedType is not equal 'unassigned', and the value of tmnxMDAEq…	TmnxMdaType	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.5
tmnxMDAHwIndex The value of tmnxHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this MDA card.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.6
tmnxMDAMaxPorts The maximum number of ports that can be equipped on this MDA card.	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.7
tmnxMDAEquippedPorts The value of tmnxMDAEquippedPorts indicates the number of ports equipped on this MDA card.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.8
tmnxMDATxTimingSelected The transmit timing method which is presently selected and being used by this MDA. tmnxMDATxTimingSelected will be set to 'not-applicable' if this MDA does not use the transmit timing subsystem.	Enumeration Enumerated Values: 1 cpm-card-A 2 cpm-card-B 3 local 4 holdover 5 not-applicable	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.10
tmnxMDASyncIfTimingStatus Indicates the status of the synchronous equipment timing subsystem. If the tmnxSyncIfTimingRef1Qualified and tmnxSyncIfTimingRef2Qualified are both set to 'not-qualified, then tmnxMDASyncIfTimingStatus is set to 'not-q…	Enumeration Enumerated Values: 1 qualified 2 not-qualified 3 not-applicable	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.11
tmnxMDANetworkIngQueues Specifies the network queue policy being used for this object to define the queueing structure for this object.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.12
tmnxMDACapabilities tmnxMDACapabilities indicates the capabilities of this MDA. It identifies the type of MDA and the protocols that can run on it.	Bits Enumerated Values: 0 isEthernet 1 isSonet 2 isTDM 3 supportsPPP 4 supportsFR 5 supportsATM 6 supportscHDLC 7 isCMA 8 supportsCEM	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.13
tmnxMDAMinChannelization tmnxMDAMinChannelization indicates the minimum size of the channel that can exist on this MDA.	TmnxMDAChanType Type Values: 0 unknown 1 sonetSts768 2 sonetSts192 3 sonetSts48 4 sonetSts12 5 sonetSts3 6 sonetSts1 7 sdhTug3 8 sonetVtg 9 sonetVt15 10 sonetVt2 11 sonetVt3 12 sonetVt6 13 pdhTu3 14 pdhDs3 15 pdhE3 16 pdhDs1 17 pdhE1 18 pdhDs0Grp	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.14
tmnxMDAMaxChannelization tmnxMDAMaxChannelization indicates the maximum size of the channel that can exist on this MDA.	TmnxMDAChanType Type Values: 0 unknown 1 sonetSts768 2 sonetSts192 3 sonetSts48 4 sonetSts12 5 sonetSts3 6 sonetSts1 7 sdhTug3 8 sonetVtg 9 sonetVt15 10 sonetVt2 11 sonetVt3 12 sonetVt6 13 pdhTu3 14 pdhDs3 15 pdhE3 16 pdhDs1 17 pdhE1 18 pdhDs0Grp	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.15
tmnxMDAMaxChannels tmnxMDAMaxChannels is applicable for SONET and TDM MDAs only. It indicates the total number of leaf SONET paths, TDM channels and bundles on the MDA that may be configured to pass traffic.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.16
tmnxMDAChannelsInUse tmnxMDAChannelsInUse is applicable for SONET and TDM MDAs only. It indicates the total number of leaf SONET paths, TDM channels and bundles on the MDA which are in use. A leaf SONET path or TDM channel which is curren…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.17
tmnxMDACcagId When tmnxMDAAssignedType has a value of 'cca' , the value of tmnxMDACcagId specifies the Cross Connect Aggregation Group (CCAG) entry this MDA is provisioned on. If this entry does not represent a 'cca' MDA or is no…	TmnxCcagIdr/w Type Constraints: range: 0..8	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.18
tmnxMDAReboot Setting this variable to 'doAction' causes the MDA to execute a soft-reboot.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.19
tmnxMDAHiBwMcastSource The value of tmnxMDAHiBwMcastSource specifies if this MDA should attempt to allocate separate fabric planes to allocate high bandwidth multicast traffic taps. tmnxMDAHiBwMcastGroup must be set in the sam…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.20
tmnxMDAHiBwMcastAlarm The value of tmnxMDAHiBwMcastAlarm specifies if a tmnxChassisHiBwMcastAlarm alarm is raised if there are more than one high bandwidth multicast traffic taps sharing a plane.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.21
tmnxMDAHiBwMcastTapCount The value of tmnxMDAHiBwMcastTapCount indicates the number of high bandwidth multicast traffic taps on this MDA.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.22
tmnxMDAHiBwMcastGroup The value of tmnxMDAHiBwMcastGroup specifies the group of high bandwidth multicast traffic taps to which this tap belongs. A value of '0' specifies that this tap is not a member of any High Bandwidth Mult…	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.23
tmnxMDAClockMode The value of tmnxMDAClockMode specifies the clock mode of the MDA. notApplicable - The MDA does not support any clock modes or domains. adaptive - The MDA is in 'adaptive' clock mode. This allows …	Enumerationr/w Enumerated Values: 0 notApplicable 1 adaptive 2 differential	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.24
tmnxMDADiffTimestampFreq The value of tmnxMDADiffTimestampFreq specifies the differential timestamp frequency of the differential clock on the MDA. The value must be a multiple of 8 KHz. This value can only be chan…	kilohertzUnsigned32r/w Constraints: range: 103680-103680 range: 77760-77760 range: 19440-19440 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.25
tmnxMDAMcPathMgmtBwPlcyName The value of tmnxMDAMcPathMgmtBwPlcyName specifies the multicast policy name configured on the MDA.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.27
tmnxMDAMcPathMgmtPriPathLimit The value of tmnxMDAMcPathMgmtPriPathLimit specifies the primary path limit for the MDA.	mega-bits-per-secondUnsigned32r/w Constraints: range: 0-2000	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.28
tmnxMDAMcPathMgmtSecPathLimit The value of tmnxMDAMcPathMgmtSecPathLimit specifies the secondary path limit for the MDA.	mega-bits-per-secondUnsigned32r/w Constraints: range: 0-2000	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.29
tmnxMDAMcPathMgmtAncPathLimit The value of tmnxMDAMcPathMgmtAncPathLimit specifies the ancillary path limit for the MDA.	mega-bits-per-secondUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.30
tmnxMDAMcPathMgmtAdminState The value of tmnxMDAMcPathMgmtAdminState specifies administrative state of this multicast path on the MDA.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.31
tmnxMDAIngNamedPoolPolicy The value of tmnxMDAIngNamedPoolPolicy specifies a named pool policy associated with an MDA ingress context. The policy governs the way named pools are created at the MDA level.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.32
tmnxMDAEgrNamedPoolPolicy The value of tmnxMDAEgrNamedPoolPolicy specifies a named pool policy associated with an MDA egress context. The policy governs the way named pools are created at the MDA level.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.33
tmnxMDAMcPathMgmtPriInUseBw The value of tmnxMDAMcPathMgmtPriInUseBw indicates the in use ingress multicast bandwidth for the primary forwarding path.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.36
tmnxMDAMcPathMgmtSecInUseBw The value of tmnxMDAMcPathMgmtSecInUseBw indicates the in use ingress multicast bandwidth for the secondary forwarding path.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.37
tmnxMDAMcPathMgmtAncInUseBw The value of tmnxMDAMcPathMgmtAncInUseBw indicates the in use ingress multicast bandwidth for the ancillary forwarding path.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.38
tmnxMDAMcPathMgmtBlkHoleInUseBw The value of tmnxMDAMcPathMgmtBlkHoleInUseBw indicates the bandwidth of the ingress multicast traffic that is being black holed on the MDA.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.8.1.39

The card type table has an entry for each Alcatel 7x50 SR series
card model.

tmnxCardTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.9.1

Each row entry represents an Alcatel 7x50 SR series Card model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.

Indexes

tmnxCardTypeIndex

Column	Syntax	OID
tmnxCardTypeIndex The unique index value which identifies this type of Alcatel 7x50 SR series card model.	TmnxCardType	.1.3.6.1.4.1.6527.3.1.2.2.3.9.1.1
tmnxCardTypeName The administrative name that identifies this type of Alcatel 7x50 SR series card model. This name string may be used in CLI commands to specify a particular card model type.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.3.9.1.2
tmnxCardTypeDescription A detailed description of this Alcatel 7x50 SR series card model.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.9.1.3
tmnxCardTypeStatus When tmnxCardTypeStatus has a value of 'true' it indicates that this card model is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.9.1.4

The MDA type table has an entry for each Alcatel 7x50 SR series
MDA card model.

tmnxMdaTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.10.1

Each row entry represents an Alcatel 7x50 SR series MDA card model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.

Indexes

tmnxMdaTypeIndex

Column	Syntax	OID
tmnxMdaTypeIndex The unique index value which identifies this type of Alcatel 7x50 SR series MDA card model.	TmnxMdaType	.1.3.6.1.4.1.6527.3.1.2.2.3.10.1.1
tmnxMdaTypeName The administrative name that identifies this type of Alcatel 7x50 SR series MDA card model. This name string may be used in CLI commands to specify a particular MDA card model type.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.3.10.1.2
tmnxMdaTypeDescription A detailed description of this Alcatel 7x50 SR series MDA card model.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.10.1.3
tmnxMdaTypeStatus When tmnxMdaTypeStatus has a value of 'true' it indicates that this MDA card model is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.10.1.4

The synchronous interface timing table has an entry for each cpm
card in the system.

tmnxSyncIfTimingEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.11.1

A row represents the configuration of synchronous equipment timing
subsystem (SETS) of the system. Entries cannot be created and deleted
via SNMP SET operations. When a tmnxCpmCardEntry is created, a
tmnxSyncIfTimin…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxSyncIfTimingRevert The value of tmnxSyncIfTimingRevert indicates whether the reference source will revert to a higher priority source that has been re-validated or newly validated. The synchronous interface timing subsyst…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.1
tmnxSyncIfTimingRefOrder1 The value of tmnxSyncIfTimingRefOrder1 indicates the most preferred timing reference source. The synchronous equipment timing subsystem can lock to three different timing reference inputs, reference1, ref…	TmnxSETSRefSource Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.2
tmnxSyncIfTimingRefOrder2 The value of tmnxSyncIfTimingRefOrder2 indicates the second most preferred timing reference for the synchronous equipment timing subsystem.	TmnxSETSRefSource Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.3
tmnxSyncIfTimingRef1SrcPort The value of tmnxSyncIfTimingRef1SrcPort indicates the source port of the first timing reference. A value of '1e000000'H indicates that there is no source port for this reference.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.4
tmnxSyncIfTimingRef1AdminStatus The value of tmnxSyncIfTimingRef1AdminStatus indicates the administrative status of the first timing reference.	TmnxPortAdminStatus Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.5
tmnxSyncIfTimingRef1InUse The value of tmnxSyncIfTimingRef1InUse indicates whether the first timing reference is presently being used by the synchronous timing subsystem. If it is in use, tmnxSyncIfTimingFreqOffset indicates the frequency offse…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.6
tmnxSyncIfTimingRef1Qualified The value of tmnxSyncIfTimingRef1Qualified indicates whether the first timing reference is qualified for use by the synchronous timing subsystem. If tmnxSyncIfTimingRef1Qualified is set to 'not-qualified', then the obj…	TmnxSETSRefQualified Type Values: 1 qualified 2 not-qualified	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.7
tmnxSyncIfTimingRef1Alarm The value of tmnxSyncIfTimingRef1Alarm indicates the alarms on the first reference. If any of the bits is set to '1', then the first reference is disqualified by the timing subsystem and the value of tmnxSyncIfTimingR…	TmnxSETSRefAlarm Type Values: 0 los 1 oof 2 oopir	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.8
tmnxSyncIfTimingRef2SrcPort The value of tmnxSyncIfTimingRef2SrcPort indicates the source port of the second timing reference. A value of '1e000000'H indicates that there is no source port for this reference.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.9
tmnxSyncIfTimingRef2AdminStatus The value of tmnxSyncIfTimingRef2AdminStatus indicates the administrative status of the second timing reference.	TmnxPortAdminStatus Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.10
tmnxSyncIfTimingRef2InUse The value of tmnxSyncIfTimingRef2InUse indicates whether the second timing reference is presently being used by the synchronous timing subsystem.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.11
tmnxSyncIfTimingRef2Qualified The value of tmnxSyncIfTimingRef2Qualified indicates whether the second timing reference is qualified for use by the synchronous timing subsystem. If tmnxSyncIfTimingRef2Qualified is 'not-qualified' then the object tmn…	TmnxSETSRefQualified Type Values: 1 qualified 2 not-qualified	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.12
tmnxSyncIfTimingRef2Alarm The value of tmnxSyncIfTimingRef2Alarm indicates the alarms on the second reference. If any of the bits is set to '1', then the second reference is disqualified by the timing subsystem and the value of tmnxSyncIfTimin…	TmnxSETSRefAlarm Type Values: 0 los 1 oof 2 oopir	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.13
tmnxSyncIfTimingFreqOffset The value of tmnxSyncIfTimingFreqOffset indicates the frequency offset of the current selected timing reference in parts per million (ppm).	parts-per-millionSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.14
tmnxSyncIfTimingStatus The value of tmnxSyncIfTimingStatus indicates the present status of the synchronous timing equipment subsystem (SETS).	Enumeration Enumerated Values: 1 not-present 2 master-freerun 3 master-holdover 4 master-locked 5 slave 6 acquiring	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.15
tmnxSyncIfTimingRefOrder3 The value of tmnxSyncIfTimingRefOrder3 is the third most preferred timing reference for the synchronous equipment timing subsystem.	TmnxSETSRefSource Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.16
tmnxSyncIfTimingBITSIfType The value of tmnxSyncIfTimingBITSIfType indicates the interface type of the BITS (Building Integrated Timing Supply) timing reference. It also indicates the framing type of the interface.	TmnxBITSIfType Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.17
tmnxSyncIfTimingBITSAdminStatus The value of tmnxSyncIfTimingBITSAdminStatus indicates administrative status of the BITS (Building Integrated Timing Supply) timing reference.	TmnxPortAdminStatus Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.18
tmnxSyncIfTimingBITSInUse The value of tmnxSyncIfTimingBITSInUse indicates whether the BITS timing reference is presently being used by the synchronous timing subsystem. If it is in use, tmnxSyncIfTimingFreqOffset indicates the frequency offset…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.19
tmnxSyncIfTimingBITSQualified The value of tmnxSyncIfTimingBITSQualified indicates whether the BITS timing reference is qualified for use by the synchronous timing subsystem. If tmnxSyncIfTimingBITSQualified is 'not-qualified', then the object tmnx…	TmnxSETSRefQualified Type Values: 1 qualified 2 not-qualified	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.20
tmnxSyncIfTimingBITSAlarm The value of tmnxSyncIfTimingBITSAlarm indicates the alarms on the BITS reference. If any of the bits is set to '1', then the BITS reference is disqualified by the timing subsystem and the value of tmnxSyncIfTimingBIT…	TmnxSETSRefAlarm Type Values: 0 los 1 oof 2 oopir	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.21
tmnxSyncIfTimingRef1SrcHw The value of tmnxSyncIfTimingRef1SrcHw indicates the source HW index of the first timing reference if source is not a port.	TmnxHwIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.22
tmnxSyncIfTimingRef1BITSIfType The value of tmnxSyncIfTimingRef1BITSIfType indicates the interface type of the first timing reference if the source is BITS. It also indicates the framing type of the interface.	TmnxBITSIfType Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.23
tmnxSyncIfTimingRef2SrcHw The value of tmnxSyncIfTimingRef2SrcHw indicates the source HW index of the second timing reference if source is not a port.	TmnxHwIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.24
tmnxSyncIfTimingRef2BITSIfType The value of tmnxSyncIfTimingRef2BITSIfType indicates the interface type of the second timing reference if the source is BITS. It also indicates the framing type of the interface.	TmnxBITSIfType Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.3.11.1.25

The tmnxCcagTable has an entry for each Cross Connect Aggregation
Group,CCAG, configured on this system.

tmnxCcagEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.12.1

Each row entry represents a particular CCAG.
Entries are created/deleted by the user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.

Indexes

tmnxCcagId

Column	Syntax	OID
tmnxCcagId The value of tmnxCcagId is used to index into the tmnxCcagTable. It uniquely identifies a CCAG entry as configured on this system.	TmnxCcagId Type Constraints: range: 0..8	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.1
tmnxCcagRowStatus The value of tmnxCcagRowStatus specifies the row status. It allows entries to be created and deleted in the tmnxCcagTable. tmnxCcagRowStatus does not support createAndWait. The status can only be active or notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.2
tmnxCcagLastChanged The value of tmnxCcagLastChanged indicates the time this row was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.3
tmnxCcagDescription The value of tmnxCcagDescription specifies a user provided description string of this CCAG entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.4
tmnxCcagAdminStatus The value of tmnxCcagAdminStatus specifies the desired state of this CCAG.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.5
tmnxCcagOperStatus The value of tmnxCcagOperStatus indicates the operational state of this CCAG.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.6
tmnxCcagCcaRate The value of tmnxCcagCcaRate specifies the maximum forwarding rate for each CCA member within the CCAG.	kilobits per secondTmnxCcagRater/w Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.7
tmnxCcagAccessAdaptQos The value of tmnxCcagAccessAdaptQos specifies how the CCAG SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active CCAs. link (1) - The CCAG will create the SAP queues an…	Enumerationr/w Enumerated Values: 1 link 2 distribute	.1.3.6.1.4.1.6527.3.1.2.2.3.12.1.8

The tmnxCcagPathTable has an entry for each Cross Connect
Aggregation Group, CCAG, path configured on this system.

tmnxCcagPathEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.13.1

Each row entry represents a particular CCAG Path.
Entries are created/deleted by the user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.

Indexes

tmnxCcagId tmnxCcagPathId

Column	Syntax	OID
tmnxCcagPathId The value of tmnxCcagPathId is used as the secondary index into the tmnxCcagPathTable. Along with tmnxCcagId, it uniquely identifies a specific path, alpha or beta, on a CCAG.	Enumeration Enumerated Values: 1 alpha 2 beta	.1.3.6.1.4.1.6527.3.1.2.2.3.13.1.1
tmnxCcagPathLastChanged The value of tmnxCcagPathLastChanged indicates the time this row was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.3.13.1.2
tmnxCcagPathRate The value of tmnxCcagPathRate specifies the bandwidth rate limitation for this path on each member cross connect adaptor, CCA, in the CCAG.	kilobits per secondTmnxCcagRater/w Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.3.1.2.2.3.13.1.3
tmnxCcagPathRateOption The value of tmnxCcagPathRateOption specifies whether the rate in tmnxCcagPathRate is defined as an aggregate path rate for all CCAs in the CCAG or as a per CCA path rate.	TmnxCcagRateOptionr/w Type Values: 1 aggregate 2 cca	.1.3.6.1.4.1.6527.3.1.2.2.3.13.1.4
tmnxCcagPathWeight The value of tmnxCcagPathWeight specifies the scheduling percentage for this path. It is applied to all CCAs in the CCAG membership list for this path.	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.6527.3.1.2.2.3.13.1.5

The tmnxCcagPathCcTable has an entry for each type of Cross
Connection on a Cross Connect Aggregation Group Path
configured on this system.

tmnxCcagPathCcEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.14.1

Each row entry represents a particular CCAG Path Cross Connect.
Entries are created/deleted by the user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.

Indexes

tmnxCcagId tmnxCcagPathId tmnxCcagPathCcType

Column	Syntax	OID
tmnxCcagPathCcType The value of tmnxCcagPathCcType is used as a third index into the tmnxCcagPathCcTable. Along with tmnxCcagId and tmnxCcagPathId, it uniquely identifies a cross connection type on a specific path in a particular CCAG. Th…	Enumeration Enumerated Values: 1 sapsap 2 sapnet 3 netsap	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.1
tmnxCcagPathCcLastChanged The value of tmnxCcagPathCcLastChanged indicates the time this row was last changed.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.2
tmnxCcagPathCcEgrPoolResvCbs The value of tmnxCcagPathCcEgrPoolResvCbs specifies the percentage of pool size reserved for the committed burst size, CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS request…	Integer32r/w Constraints: range: -1-100	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.3
tmnxCcagPathCcEgrPoolSlpPlcy The value of tmnxCcagPathCcEgrPoolSlpPlcy specifies the slope policy being used for the egress pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.4
tmnxCcagPathCcIngPoolResvCbs The value of tmnxCcagPathCcIngPoolResvCbs specifies the percentage of pool size reserved for the committed burst size, CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS request…	Integer32r/w Constraints: range: -1-100	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.5
tmnxCcagPathCcIngPoolSlpPlcy The value of tmnxCcagPathCcIngPoolSlpPlcy specifies the slope policy being used for the ingress pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic. tmnxCcagPathCcIn…	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.6
tmnxCcagPathCcAcctPolicyId The value of tmnxCcagPathCcAcctPolicyId specifies the accounting policy which must be defined prior to associating it with the port. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry …	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.7
tmnxCcagPathCcCollectStats The value of tmnxCcagPathCcCollectStats specifies whether the collection of accounting and statistical data for the network port is enabled/disabled, 'true'/'false'. When applying accounting policies the data by defa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.8
tmnxCcagPathCcQueuePlcy The value of tmnxCcagPathCcQueuePlcy specifies the network egress queue policy. If the value of tmnxCcagPathCcType is not 'netsap', the value of this object is meaningless and an attempt to set it will result in an in…	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.9
tmnxCcagPathCcMac The value of tmnxCcagPathCcMac specifies the MAC address of the virtual LAG that maps to tmnxCcagPathId and tmnxCcagPathCcType. The default value of this object is derived from the chassis MAC address pool.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.10
tmnxCcagPathCcMtu The value of tmnxCcagPathCcMtu specifies the MTU of the path indexed by tmnxCcagId, tmnxCcagPathId, and tmnxCcagPathCcType. When the value is '0', the real MTU is calculated internally.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.11
tmnxCcagPathCcUserAssignedMac The value of tmnxCcagPathCcUserAssignedMac indicates whether the value of tmnxCcagPathCcMac has been explicitly assigned or inherited from tmnxCcagPathCcHwMac, 'true' and 'false', respectively.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.12
tmnxCcagPathCcHwMac The value of tmnxCcagPathCcHwMac is the system assigned MAC address of the virtual LAG that maps to tmnxCcagPathId and tmnxCcagPathCcType. When tmnxCcagPathCcUserAssignedMac is 'false', tmnxCcagPathCcMac inherits its…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.2.3.14.1.13

The tmnxMcmTable has an entry for each Mda Carrier module
(MCM) on the 7710 system.

tmnxMcmEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.15.1

Each row entry represents a MCM in a chassis in the 7710 system.
Entries in the table cannot be created and deleted via SNMP SET
operations. When a tmnxChassisEntry is created, a
tmnxMcmEntry is created in the chassis.…

Indexes

tmnxChassisIndex tmnxCardSlotNum tmnxMcmSlotNum

Column	Syntax	OID
tmnxMcmSlotNum The unique value which identifies this MDA slot within a specific IOM card in the system. Since the MCM occupies two MDA slots in the chassis this value can only be an odd number.	Unsigned32 Constraints: range: 0-16	.1.3.6.1.4.1.6527.3.1.2.2.3.15.1.1
tmnxMcmSupportedTypes A bit-mask that specifies what MCM types can be physically supported in this chassis.	TmnxMcmType	.1.3.6.1.4.1.6527.3.1.2.2.3.15.1.2
tmnxMcmAssignedType A bit-mask that identifies the administratively assigned (pre-provisioned) MCM type that should occupy this chassis. If tmnxMcmAssignedType has a value of 'unassigned', this slot has not yet been pre-provisioned. Ther…	TmnxMcmTyper/w	.1.3.6.1.4.1.6527.3.1.2.2.3.15.1.3
tmnxMcmEquippedType A bit-mask that identifies the MCM type that is physically inserted into this chassis. If the chassis has been pre-provisioned, tmnxMcmAssignedType is not equal 'unassigned', and the value of tmnxMcmEquippedType is not…	TmnxMcmType	.1.3.6.1.4.1.6527.3.1.2.2.3.15.1.4
tmnxMcmHwIndex The value of tmnxMcmHwIndex is the index into the tmnxHwTable for the row entry that represents the hardware component information for this MCM.	TmnxHwIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.3.15.1.5

The card type table has an entry for each Alcatel 7710 series
Mda Carrier Module (MCM) model.

tmnxMcmTypeEntry row .1.3.6.1.4.1.6527.3.1.2.2.3.16.1

Each row entry represents an Alcatel 7710 series MCM model.
Rows in this table are created by the agent at initialization and
cannot be created or destroyed by SNMP Get or Set requests.

Indexes

tmnxMcmTypeIndex

Column	Syntax	OID
tmnxMcmTypeIndex The unique index value which identifies this type of Alcatel 7710 series MCM model.	TmnxMcmType	.1.3.6.1.4.1.6527.3.1.2.2.3.16.1.1
tmnxMcmTypeName The administrative name that identifies this type of Alcatel 7710 series MCM model. This name string may be used in CLI commands to specify a particular card model type.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.2.3.16.1.2
tmnxMcmTypeDescription A detailed description of this Alcatel 7710 series MCM model.	ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.2.3.16.1.3
tmnxMcmTypeStatus When tmnxMcmTypeStatus has a value of 'true' it indicates that this MCM is supported in this revision of the management software. When it has a value of 'false' there is no support.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.3.16.1.4

Values for the synchronous interface timing for the chassis.

tSyncIfTimingAdmEntry row .1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1

Information about the synchronous interface timing.
Entries are created by user.
Entries are deleted by user.
Note that the first Alcatel 7x50 SR series product release does
not support configuration of synchronous tim…

Indexes

tmnxChassisIndex tmnxCpmCardSlotNum tmnxCpmCardNum

Column	Syntax	OID
tSyncIfTimingAdmRevert The value of tSyncIfTimingAdmRevert specifies whether the reference source will revert to a higher priority source that has been re-validated or newly validated. The synchronous interface timing subsystem…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.1
tSyncIfTimingAdmRefOrder1 The value of tSyncIfTimingAdmRefOrder1 specifies the most preferred timing reference source. The synchronous equipment timing subsystem can lock to three different timing reference inputs, reference1, ref…	TmnxSETSRefSourcer/w Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.2
tSyncIfTimingAdmRefOrder2 The value of tSyncIfTimingAdmRefOrder2 specifies the second most preferred timing reference for the synchronous equipment timing subsystem.	TmnxSETSRefSourcer/w Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.3
tSyncIfTimingAdmRef1SrcPort The value of tSyncIfTimingAdmRef1SrcPort specifies the source port of the first timing reference. This can only be set to a valid TmnxPortID if the value of tSyncIfTimingAdmRef1SrcHw is 0.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.4
tSyncIfTimingAdmRef1AdminStatus The value of tSyncIfTimingAdmRef1AdminStatus specifies the desired administrative status of the first timing reference.	TmnxPortAdminStatusr/w Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.5
tSyncIfTimingAdmRef2SrcPort The value of tSyncIfTimingAdmRef2SrcPort specifies the source port of the second timing reference. This can only be set to a valid TmnxPortID if the value of tSyncIfTimingAdmRef2SrcHw is 0.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.6
tSyncIfTimingAdmRef2AdminStatus The value of tSyncIfTimingAdmRef2AdminStatus specifies the desired administrative status of the second timing reference.	TmnxPortAdminStatusr/w Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.7
tSyncIfTimingAdmChanged The value of tSyncIfTimingAdmChanged is a bitmask that indicates which objects have been set, but not committed. bit values used here are: 0x0001: tSyncIfTimingAdmRevert 0x0002: tSyncIfTimingAdmRef…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.8
tSyncIfTimingAdmRefOrder3 The value of tSyncIfTimingAdmRefOrder3 indicates the third most preferred timing reference for the synchronous equipment timing subsystem.	TmnxSETSRefSourcer/w Type Values: 1 reference1 2 reference2 3 bits	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.9
tSyncIfTimingAdmBITSIfType The value of tSyncIfTimingAdmBITSIfType specifies the interface type of the BITS (Building Integrated Timing Supply) timing reference.	TmnxBITSIfTyper/w Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.10
tSyncIfTimingAdmBITSAdminStatus The value of tSyncIfTimingAdmBITSAdminStatus specifies the desired administrative status of the BITS (Building Integrated Timing Supply) timing reference.	TmnxPortAdminStatusr/w Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.11
tSyncIfTimingAdmRef1SrcHw The value of tSyncIfTimingAdmRef1SrcHw specifies the source HW Index of the first timing reference if the source is not a port. This can only be set to a valid HW Index if the value of tSyncIfTimingAdmRe…	TmnxHwIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.12
tSyncIfTimingAdmRef1BITSIfType The value of tSyncIfTimingAdmRef1BITSIfType specifies the interface type of the first timing reference if the source is BITS.	TmnxBITSIfTyper/w Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.13
tSyncIfTimingAdmRef2SrcHw The value of tSyncIfTimingAdmRef2SrcHw specifies the source HW Index of the second timing reference if the source is not a port. This can only be set to a valid HW Index if the value of tSyncIfTimingAdmR…	TmnxHwIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.14
tSyncIfTimingAdmRef2BITSIfType The value of tSyncIfTimingAdmRef2BITSIfType specifies the interface type of the second timing reference if the source is BITS.	TmnxBITSIfTyper/w Type Values: 0 none 1 t1-esf 2 t1-sf 3 e1-pcm30crc 4 e1-pcm31crc	.1.3.6.1.4.1.6527.3.1.2.2.8.2.1.1.15