ZHNPWMIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
22

zhnPwTable

table
.1.3.6.1.4.1.5504.2.5.31.1.1 · 1 row entry · 22 columns
Open in standard view 
This table contains the Zhone Proprietary 
Pseudo-Wire interface information.
zhnPwEntry entry .1.3.6.1.4.1.5504.2.5.31.1.1.1
A row in this table represents a pseudowire (PW) virtual
connection across a packet network. It is indexed by
pwIndex, which uniquely identifies a singular
connection.
A row is only created when an entry in the PW-STD-M…
Indexes
zhnPwIndex
Column Syntax OID
zhnPwIndex
A unique index for the conceptual row identifying a PW within
this table.
PW-TC-STD-MIBPwIndexType
Textual Convention: PW-TC-STD-MIBPwIndexType Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.1
zhnPwVlanID
The VLAN ID which this PW is mapped to. If the value is
zero, the VLAN is untagged.
r/w .1.3.6.1.4.1.5504.2.5.31.1.1.1.2
zhnPwVlanPriority
The VLAN priority.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.3
zhnPwPeerMask
This object contains the subnet mask for the peer.
This object is required if the Peer Type is IPv4.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.4
zhnPwPeerGateway
This object contains the gateway address for the peer.
This object is required if the Peer Type is IPv4.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.5
zhnPwPeerMAC
This object contains the MAC address for the peer.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.6
zhnPwMappedIfName
The name of the interface mapped to this PW. If the PW is a
structure-agnostic (i.e. SATOP) connection, the interface
name should be that of a T1/E1 port. It the PW is a
structure-aware connection, the interface name s…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.7
zhnPwLocalLMBits
Indicates the value of the Local TDM Failure (L-Bit) and
the Modifier bits (M-bits) currently transmitted.
Refer to RFC 5086 for more information on the L/M bits.
Enumeration
Enumerated Values:
0noDefect
1reserved1
2rxRDI
3nonTDMData
4txAIS
5reserved2
6reserved3
7reserved4
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.8
zhnPwLocalRBit
Indicates the value of the Remote Loss of Frames indication
(R-Bit) currently transmitted.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.9
zhnPwRemoteLMBits
Indicates the value of the Local Failure (L-Bit) and
the Modifier bits (M-bits) currently received.
Refer to RFC 5086 for more information on the L/M bits.
Enumeration
Enumerated Values:
0noDefect
1reserved1
2rxRDI
3nonTDMData
4txAIS
5reserved2
6reserved3
7reserved4
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.10
zhnPwRemoteRBit
Indicates the value of the Remote Loss of Frames indication
(R-Bit) currently received.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.11
zhnPwPeerMACMode
Setting this object to dynamic(1) will cause PW to ARP
for the MAC address of the peer node. If the value of
this object is static(2), the peer MAC address is the
value of object pwPeerMAC.
Enumerationr/w
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.12
zhnPwActualPayloadSize
The value of this object indicates the actual PayLoad Size (in bytes).
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.13
zhnPwRxRaiAction
Indicates the action to be taken upon when receiving L,M bits equal
to 0,10 (rxRAI). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS (2), the AIS pattern will be transmitte…
Enumerationr/w
Enumerated Values:
1none
2txAIS
3txRAI
4txChlIdle
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.14
zhnPwRxAisAction
Indicates the action to be taken upon when receiving L,M bits equal
to 1,00 (rxAIS). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS (2), the AIS pattern will be transmitted…
Enumerationr/w
Enumerated Values:
1none
2txAIS
3txRAI
4txChlIdle
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.15
zhnPwLopAction
Indicates the action to be taken while in a Loss or Packets state.
When set to none (1), the payload will be transmitted as it was received.
When set to txAIS (2), the AIS pattern will be transmitted towards the
local…
Enumerationr/w
Enumerated Values:
1none
2txAIS
3txRAI
4txChlIdle
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.16
zhnPwAdaptState
Indicates the current adaptive state. The only value that can be written
for this object is restart (7), which will restart clock adaption on the port
associated with the bundle.
Enumerationr/w
Enumerated Values:
1idle
2acquisition
3tracking1
4tracking2
5locked
6recovery
7restart
8disabled
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.17
zhnPwAdaptTime
Indicates the current adaptive timestamp.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.18
zhnPwIsdn
Indicates the endpoint is of IDSN type as defined in ETS 300 233.
When Idsn type is set to disabled (1), the payload is transmitted as
it was received. When set to lt (2), the Line Termination unit is
connected to the…
Enumerationr/w
Enumerated Values:
1disabled
2lt
3nt1
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.19
zhnPwOuterLabel
The value of this object is the MPLS 20-bit outer tag. This
object is only applicable for MPLS PW connections.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.20
zhnPwClkAcquisitionLevel
The PLL clock acquisition level from 0 - 15. Level 8 or higher is required
for reliable operation. During the clock acquisition process, the Phase Lock
Loop moves through 16 adjustment levels. Level 0 is the starting …
Unsigned32
Constraints:
range: 0-15
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.21
zhnPwClearTotalStats
This object can be used to clear all PWE total statistics counters, contained
in the pwPerfTotalTable and defined in the PW-STD mib.
PwClearStatisticsTCr/w
Textual Convention: PwClearStatisticsTC Enumeration
Type Values:
0noAction
1clear
 .1.3.6.1.4.1.5504.2.5.31.1.1.1.22