zhnPwVlanPriority
ZHNPWMIB ·
.1.3.6.1.4.1.5504.2.5.31.1.1.1.3
Object
column
r/w
Unsigned32
The VLAN priority.
Context
- MIB
- ZHNPWMIB
- OID
.1.3.6.1.4.1.5504.2.5.31.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhnPwEntry
- Table
- zhnPwTable
- Siblings
- 21
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhnPwIndex A unique index for the conceptual row identifying a PW within
this table. | column | PW-TC-STD-MIBPwIndexType | .1.3.6.1.4.1.5504.2.5.31.1.1.1.1 |
| zhnPwRemoteLMBits Indicates the value of the Local Failure (L-Bit) and
the Modifier bits (M-bits) currently received.
Refer to RFC 5086 for more information on the L/M bits. | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.10 |
| zhnPwRemoteRBit Indicates the value of the Remote Loss of Frames indication
(R-Bit) currently received. | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.11 |
| zhnPwPeerMACMode Setting this object to dynamic(1) will cause PW to ARP
for the MAC address of the peer node. If the value of
this object is static(2), the peer MAC address is the
value of objec… | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.12 |
| zhnPwActualPayloadSize The value of this object indicates the actual PayLoad Size (in bytes). | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.31.1.1.1.13 |
| zhnPwRxRaiAction Indicates the action to be taken upon when receiving L,M bits equal
to 0,10 (rxRAI). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS… | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.14 |
| zhnPwRxAisAction Indicates the action to be taken upon when receiving L,M bits equal
to 1,00 (rxAIS). When set to none (1), the payload will be transmitted
as it was received. When set to txAIS … | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.15 |
| zhnPwLopAction Indicates the action to be taken while in a Loss or Packets state.
When set to none (1), the payload will be transmitted as it was received.
When set to txAIS (2), the AIS patter… | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.16 |
| zhnPwAdaptState Indicates the current adaptive state. The only value that can be written
for this object is restart (7), which will restart clock adaption on the port
associated with the bundle. | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.17 |
| zhnPwAdaptTime Indicates the current adaptive timestamp. | column | Integer32 | .1.3.6.1.4.1.5504.2.5.31.1.1.1.18 |
| zhnPwIsdn Indicates the endpoint is of IDSN type as defined in ETS 300 233.
When Idsn type is set to disabled (1), the payload is transmitted as
it was received. When set to lt (2), the Li… | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.19 |
| zhnPwVlanID The VLAN ID which this PW is mapped to. If the value is
zero, the VLAN is untagged. | column | - | .1.3.6.1.4.1.5504.2.5.31.1.1.1.2 |
| zhnPwOuterLabel The value of this object is the MPLS 20-bit outer tag. This
object is only applicable for MPLS PW connections. | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.31.1.1.1.20 |
| zhnPwClkAcquisitionLevel The PLL clock acquisition level from 0 - 15. Level 8 or higher is required
for reliable operation. During the clock acquisition process, the Phase Lock
Loop moves through 16 adj… | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.31.1.1.1.21 |
| zhnPwClearTotalStats This object can be used to clear all PWE total statistics counters, contained
in the pwPerfTotalTable and defined in the PW-STD mib. | column | PwClearStatisticsTC | .1.3.6.1.4.1.5504.2.5.31.1.1.1.22 |
| zhnPwPeerMask This object contains the subnet mask for the peer.
This object is required if the Peer Type is IPv4. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.31.1.1.1.4 |
| zhnPwPeerGateway This object contains the gateway address for the peer.
This object is required if the Peer Type is IPv4. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.31.1.1.1.5 |
| zhnPwPeerMAC This object contains the MAC address for the peer. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.5504.2.5.31.1.1.1.6 |
| zhnPwMappedIfName The name of the interface mapped to this PW. If the PW is a
structure-agnostic (i.e. SATOP) connection, the interface
name should be that of a T1/E1 port. It the PW is a
structur… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.2.5.31.1.1.1.7 |
| zhnPwLocalLMBits Indicates the value of the Local TDM Failure (L-Bit) and
the Modifier bits (M-bits) currently transmitted.
Refer to RFC 5086 for more information on the L/M bits. | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.8 |
| zhnPwLocalRBit Indicates the value of the Remote Loss of Frames indication
(R-Bit) currently transmitted. | column | Enumeration | .1.3.6.1.4.1.5504.2.5.31.1.1.1.9 |