XF-RADIOLINK-PTP-TERMINAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

381

xfRLPtpTerminalTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.1 · 1 row entry · 29 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPtpTerminalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPtpTerminalTable'

Table for Radiolink point-to-point terminal managed objects.
The table is indexed with entLogicalIndex.

xfRLPtpTerminalEntry row .1.3.6.1.4.1.193.81.3.4.1.1.1.1

An entry in the xfRLPtpTerminalTable

Indexes

ENTITY-MIBentLogicalIndex

Column Syntax OID

xfTermId

Network identity for terminal.
Same as GNM id.
Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
Default = .TRMA. (also for Far End)
Near end access: read-write
Far end access: read-write (Traffic …

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.1

xfTermType

Terminal type
- other - Unknown
- rlMLE - MLE classic
- rlXfMLE - MMU2
- rlXfMLTN - MMU2B
- rlXfMLStandalone(5) - MMU2 CS
- rlXfMLTNPT(6) - Pt1

Enumeration

Enumerated Values:

1	other
2	rlMLE
3	rlXfMLE
4	rlXfMLTN
5	rlXfMLStandalone
6	rlXfMLTNPT

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.2

xfTermProtection

This object sets the protection mode of the terminal.
- other - Unknown
- unprotected - 1+0
- protectedHotStandby - 1+1 Hot
- protectedWorkingStandby - 1+1 Working
- UnProtectedSDC …

Enumerationr/w

Enumerated Values:

1	other
2	unprotected
3	protectedHotStandby
4	protectedWorkingStandby
5	unProtectedSDC
6	enhancedRLB

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.3

xfTermCapacity

This object sets the capacity on the terminal
* other - Unknown
* twoE1 - 2x2 Mbps
* fourE1 - 4*2 Mbps (only rlMLE)
* oneE2 - 8 Mbps
* twoE2 - 2x8 Mbps
* oneE3oneE1 - 34+2 Mbps
* twoE…

Enumerationr/w

Enumerated Values:

1	other
2	twoE1
3	fourE1
4	oneE2
5	twoE2
6	oneE3oneE1
7	twoE3
8	fourE3
9	fourDS1
10	eightDS1
11	sixteenDS1
12	seventeenDS1
13	oneStm0
14	oneStm1oneE1
15	thirtytwoDS1
16	oneStm1oneDS1
17	oneStm1oneE1at50MHz
18	twentytwoE1
19	thirtyfiveE1
20	fortysixE1
21	seventyfiveE1
22	oneStm1OneJ1
23	sixtynineDS1
24	eightyDS1
25	oneStm1OneE1LH
26	oneStm1OneDS1LH

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.4

xfTermCapacityCapability

This object shows the capacity capability on the terminal.
Binary AND on contained modems units capabilities.

Bits

Enumerated Values:

0	oneE1
1	twoE1
2	fourE1
3	oneE2
4	twoE2
5	oneE3oneE1
6	twoE3
7	fourE3
8	fourDS1
9	eightDS1
10	sixteenDS1
11	seventeenDS1
12	oneStm0
13	oneStm1oneE1
14	thirtytwoDS1
15	oneStm1oneDS1
16	oneStm1oneE1at50MHz
17	twentytwoE1
18	thirtyfiveE1
19	fortysixE1
20	seventyfiveE1
21	oneStm1OneJ1
22	sixtynineDS1
23	eightyDS1
24	oneStm1OneE1LH
25	oneStm1OneDS1LH

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.5

xfTermModulation

This object sets the modulation method on the terminal.
Legal settable values are:
- cqpsk(2) CQPSK
- qam16(3) 16-QAM
- qam128(4) 128-QAM
- qam32(5) 32-QAM
- qam64(6) 64-QAM
Default value PDH CQPSK ETSI: cqpsk(2) …

TermModulationr/w

Type Values:

1	other
2	cqpsk
3	qam16
4	qam128
5	qam32
6	qam64
7	qam4
8	qam8
9	qam256
10	qam512
11	qam1024

Description:

Channel Modulation

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.6

xfTermModulationCapability

This object shows the modulation capability on the terminal.
Binary AND on contained modems and radio units capabilities.

Bits

Enumerated Values:

0	cqpsk
1	qam16
2	qam128
3	qam32
4	qam64

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.7

xfTermRestore

rlXfMLTN:
Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable,
turn transmitter on and set protection switch mode to Auto.
In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loo…

Enumerationr/w

Enumerated Values:

restore

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.8

xfTermAlarmSeverity

This object shows the highest alarm severity for contained
units and interfaces in the terminal including E1, E2 and E3 interfaces.
Terminal alarm severity is indicated by 3 bits:
bits 012
000 clear
001 …

Bits

Enumerated Values:

0	termSeverity0
1	termSeverity1
2	termSeverity2

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.9

xfTermTrapEnable

Disables/enables trap sending from this terminal.
Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces.
Default value: enable(2)

Enumerationr/w

Enumerated Values:

1	unknown
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.10

xfTermAsPort

rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE,
else notAvailable (1).
rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE.
aspX002 - Port 3002…

Enumeration

Enumerated Values:

1	notAvailable
2	aspX002
3	aspX003
4	aspX004
5	aspX005
6	aspX006
7	aspX007
8	aspX008
9	aspX009
10	aspX010
11	aspX011
12	aspX012
13	aspX013
14	aspX014
15	aspX015
16	aspX016
17	aspX017
18	aspX018
19	aspX019
20	aspX020
21	aspX021

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.11

xfTermRemoteIdCheck

This object sets if check of identity of remote terminal shall be performed or not.
Legal values are:
- enable(2): radio id check enabled
- disable(3): radio id check disabled
Default value: disable(3)

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.12

xfTermRemoteId

Network identity for remote terminal. Same as GNM id.
Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set.
A change of the far end value might disconnect IP DCN, but
internal GNM connection will not be d…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.13

xfTermPreset

For terminals with termType = rlXfMLE or rlMLE:
- Terminal is restored with factory settings.
- Protected terminals will be set to unprotected.
For terminals with termType = rlXfMLTN:
- Terminal is restored with default…

Enumerationr/w

Enumerated Values:

preset

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.14

xfTermBerAlarmThreshold

Threshold for BER alarm.
Legal values:
- ber1e3(2): BER=1e-3 (default)
- ber1e4(3): BER=1e-4
- ber1e5(4): BER=1e-5
- ber1e6(5): BER=1e-6

Enumerationr/w

Enumerated Values:

1	other
2	ber1e3
3	ber1e4
4	ber1e5
5	ber1e6

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.15

xfTermFadeNotificationTimer

Notification suppression timer for protection alarms.
Unit: 1 sec
Value range: 0-1000
Default value: 200
Near end access: read-write
Far end access: read-only (Traffic Node)

Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.16

xfTermEquipmentProtectionIndex

Unprotected: 0
Protected: EntPhysicalindex of MMU in lowest slot

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.17

xfTermSysName

The system name of the TN hosting the terminal.
Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead.
Far end terminal: the system name is returned.

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.18

xfTermChannelMode

Channel mode for the terminal (administrative status).
This is only settable according to xfTermChannelModeCapability.
Legal values are:
- ccdp(2): Co-Channel Dual Polarization (XPIC)
- accp(3): Adjacent Channels Co-Pol…

ChannelModer/w

Type Values:

1	other
2	ccdp
3	accp
4	acap

Description:

Terminal channel mode

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.19

xfTermChannelModeCapability

Channel mode capability.
Legal values are:
- ccdp(0) ........ Co-Channel Dual Polarization (XPIC)
- accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC)
- acap(2) ........ Adjacent Channels Alternate Polarizati…

Bits

Enumerated Values:

0	ccdp
1	accp
2	acap
3	ccdp16QAM
4	ccdp64QAM
5	ccdp128QAM

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.20

xfTermTrafficAndDCN

Enable or disable traffic.
AIS is generated on all traffic interfaces when traffic is disabled,
i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though
(primarily used for license handling).
Default value…

Enumerationr/w

Enumerated Values:

1	trafficAndDCN
2	dcnOnly

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.21

xfTermFrameFormat

The frame format version used by the modem.
Legal values are:
- version0(2) only valid for MMU2 C modems
- version1(3) only valid for MMU2 C modem.
Default value: other(1)
Near end access: read-write
Far end access: rea…

Enumerationr/w

Enumerated Values:

1	other
2	version0
3	version1

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.22

xfTermFrameFormatCapability

Frame format versions supported by the modem.
Bit 0: modem MMU2 C supports frame format Version 0
Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3)

Bits

Enumerated Values:

0	version0
1	version1

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.23

xfTermDCNRadioConfiguration

DCN radio capacity for terminal.
Legal values are:
- dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop
- dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default)
- dcnRadio320kbpsMSB (4) …

Enumerationr/w

Enumerated Values:

1	other
2	dcnRadio128kbps
3	dcnRadio320kbpsDCCr
4	dcnRadio320kbpsMSB

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.24

xfTermDCNRadioCapability

Binary AND on contained MMUs DCN radio configuration capability.
bits 210
000 undetermined
001 128kbps
010 320kbpsDCCr
100 320kbpsMSB
...
111 128kbps & 320kbpsDCCr & 320kbpsMSB

Bits

Enumerated Values:

0	dcnRadio128kbps
1	dcnRadio320kbpsDCCr
2	dcnRadio320kbpsMSB

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.25

xfTermDCNLineConfiguration

DCN line capacity for terminal.
Legal values are:
transparent(2) All RSOH bytes pass transparently over the hop.
dcnLine192kbpsDCCr(3) (default) DCCr
dcnLine192kbpsMSB(4) MSB

Note: Future compa…

Enumerationr/w

Enumerated Values:

1	other
2	transparent
3	dcnLine192kbpsDCCr
4	dcnLine192kbpsMSB

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.26

xfTermDCNLineCapability

Binary AND on contained MMUs DCN line configuration.
bits 210
000 undetermined
001 transparent
010 192kbpsDCCr
100 192kbpsMSB
...
111 transparent & 192kbpsDCCr & 192kbpsMSB

Bits

Enumerated Values:

0	transparent
1	dcnLine192kbpsDCCr
2	dcnLine192kbpsMSB

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.27

xfTermFadeNotificationConfiguration

This object enables or disables the notification suppress timer for Protection alarm.
Default value: enabled(3),
Near end access: read-write
Far end access: read-write (Traffic Node only)

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.28

xfTermLineProtection

Administrative status of the line protection for a terminal physical line
interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode.
Legal values are:
other(1) (Not settable)
unProtected(2…

Enumerationr/w

Enumerated Values:

1	other
2	unProtected
3	singleInterfaceLowSlot
4	singleInterfaceHighSlot
5	opticalSplitter
6	equipmentAndLineProtection

.1.3.6.1.4.1.193.81.3.4.1.1.1.1.29

xfRLPtpTerminalOutputPowerTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPtpTerminalOutputPowerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPtpTerminalOutputPowerTable'

Table for Radiolink point-to-points terminal output power
managed objects. The tabled is indexed with entLogicalIndex.

xfRLPtpTerminalOutputPowerEntry row .1.3.6.1.4.1.193.81.3.4.1.1.2.1

An entry in the xfRLPtpTerminalOutputPowerTable

Indexes

ENTITY-MIBentLogicalIndex

Column Syntax OID

xfTermOutputPowerOperStatus

This object shows the output power mode that is
running. It is necessarily not equal to configured mode.

TermOutputPowerStatus

Type Values:

1	other
2	rtpc
3	atpc
4	localControl
5	ra1LocalControlRa2Rtpc
6	ra1RtpcRa2LocalControl

Description:

Output power mode

.1.3.6.1.4.1.193.81.3.4.1.1.2.1.1

xfTermOutputPowerAdminStatus

This object sets the output mode of the terminal.
Legal values are:
- other(1)
- rtpc(2)
- atpc(3)
- localControl(4)
- ra1LocalControlRa2Rtpc(5)
- ra1RtpcRa2LocalControl(6)

Note, It is only possible to se…

TermOutputPowerStatusr/w

Type Values:

1	other
2	rtpc
3	atpc
4	localControl
5	ra1LocalControlRa2Rtpc
6	ra1RtpcRa2LocalControl

Description:

Output power mode

.1.3.6.1.4.1.193.81.3.4.1.1.2.1.2

xfTermAtpcCapability

This object shows the ATPC capability for the
terminal, calculated as worst case capability
for all units contained in the terminal.

Enumeration

Enumerated Values:

1	other
2	noAtpcSupport
3	doesNotExist
4	atpcCapabilityUnknown
5	supportsAtpc
6	supportsAtpcFallback
7	supportsAtpcFallbackTimer

.1.3.6.1.4.1.193.81.3.4.1.1.2.1.3

xfRLPtpTerminalPerformanceTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.4 · 1 row entry · 8 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPtpTerminalPerformanceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPtpTerminalPerformanceTable'

Table for performance data. For 1+0 systems performance
data is calculated according to ITU-T Rec. G.826. For
1+1 systems - calculated as the combined performance
of the protected terminal.
          
1+0 terminals uses ifindex for RAU IF
1+1 terminals uses ifindex for SWITCH IF

xfRLPtpTerminalPerformanceEntry row .1.3.6.1.4.1.193.81.3.4.1.1.4.1

An entry in the xfRLPtpTerminalPerformanceTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfTermTimeElapsed

The number of seconds that have elapsed
since the beginning of the current error-measurement
period.

If the current interval exceeds the maximum
value, the agent will return the maximum
value.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.1

xfTermCurrentES

This object shows the error seconds.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.2

xfTermCurrentSES

This object shows the severely error seconds.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.3

xfTermCurrentBBE

This object shows the background block errors.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.4

xfTermCurrentUAS

This object shows the unavailable seconds (or unavailable time).

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.5

xfTermCurrentBB

This object shows the background blocks.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.6

xfTermPerfReset

This object is used to reset the performance counters.
It is settable also when the radio unit isn't present.
Near end access: read-write
Far end access: read-write (Traffic Node only)

Enumerationr/w

Enumerated Values:

1	performanceReset

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.7

xfTermTimeElapsedEnRLBExt

The number of seconds that have elapsed
in Enhanced RLB Extended capacity mode
since RLB was enabled and the beginning of
the current measurement period.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.4.1.8

xfRLProtectionTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.5 · 1 row entry · 8 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLProtectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLProtectionTable'

Table for control and supervision of the protection mechanism

xfRLProtectionEntry row .1.3.6.1.4.1.193.81.3.4.1.1.5.1

An entry in the xfRLProtectionTable

Indexes

ENTITY-MIBentPhysicalIndex

Column Syntax OID

xfRLProtectionMode

This is the operational status of the protection mode.
Default: unprotected(2)

Enumeration

Enumerated Values:

1	other
2	unprotected
3	protectedHotStandby
4	protectedWorkingStandby
5	unProtectedSDC
7	enhancedRLBProtected
8	enhancedRLBExtended

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.1

xfRLProtectionRau1

entPhysicalIndex for RAU 1.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.2

xfRLProtectionRau2

entPhysicalIndex for RAU 2.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.3

xfRLActiveTxRadio

Active radio setting.
Default value: txRadio1(1)

Enumerationr/w

Enumerated Values:

1	txRadio1
2	txRadio2
3	txRadio1andtxRadio2

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.4

xfRLSwitchOverReset

Reset of the activated external alarms Tx Switch Over and Remote Tx Switch
Over by resetting internal alarms.

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.5

xfRLSwitchRevertiveTx

Preferred Tx Radio.
Default value: off(3)
Near end access: read-write
Far end access: read-only (Traffic Node only)

Enumerationr/w

Enumerated Values:

1	txRadio1
2	txRadio2
3	off

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.6

xfRLProtectionCapability

This object shows the protection capabilities of the
traffic node.

Near end access: read-only
Far end access: read-only

Bits

Enumerated Values:

0	revertiveSwitching
1	txSwitchOverConfiguration

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.7

xfRLTxSwitchOverConfiguration

Indicates whether the remote Tx switching function and
Tx switchover alarm are enabled. When disabled, the
remote Tx switching function is disabled and Tx switchover
alarm is never raised and xfRLSwitchOverReset is neve…

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.193.81.3.4.1.1.5.1.8

xfRLLineProtectionTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.6 · 1 row entry · 2 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLLineProtectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLLineProtectionTable'

Table for line protection status.

xfRLLineProtectionEntry row .1.3.6.1.4.1.193.81.3.4.1.1.6.1

An entry in the xfRLLineProtectionTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfRLLineProtectionStatus

Extension to xfLineProtectionStatus.

Bits

Enumerated Values:

0	hitlessPhase0
1	hitlessPhase1
2	hitlessPhase2
3	txSwitchover0
4	txSwitchover1
5	txSwitchover2
6	remoteTxSwitchOver0
7	remoteTxSwitchOver1
8	remoteTxSwitchOver2
9	rfInputThresholdProtection0
10	rfInputThresholdProtection1
11	rfInputThresholdProtection2

.1.3.6.1.4.1.193.81.3.4.1.1.6.1.1

xfRLLineProtectionMode

Operational status of the line
protection for a terminal physical
line interface, e.g. MMU2 E and
MMU2 F.
Administrative status is
xfTermLineProtection.

Enumeration

Enumerated Values:

1	other
2	unProtected
3	singleInterfaceLowSlot
4	singleInterfaceHighSlot
5	opticalSplitter
6	equipmentAndLineProtection

.1.3.6.1.4.1.193.81.3.4.1.1.6.1.2

xfRADIORSTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.7 · 1 row entry · 1 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRADIORSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRADIORSTable'

Traffic node extension of ifTable. The tabled is indexed with ifIndex.

xfRADIORSEntry row .1.3.6.1.4.1.193.81.3.4.1.1.7.1

An entry in the xfRADIORSTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfRADIORSAlarms

This object shows rau rs related alarms.

Bits

Enumerated Values:

0	timRadioSide0
1	timRadioSide1
2	timRadioSide2

.1.3.6.1.4.1.193.81.3.4.1.1.7.1.1

xfRADIORSPerformanceTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.8 · 1 row entry · 1 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRADIORSPerformanceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRADIORSPerformanceTable'

Traffic node extension of ifTable. The tabled is indexed with
ifIndex.

xfRADIORSPerformanceEntry row .1.3.6.1.4.1.193.81.3.4.1.1.8.1

An entry in the xfRADIORSPerformanceTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfRADIORSPerformanceAlarms

This object shows RAU RS related alarms.

Bits

Enumerated Values:

0	b1UnavailablePeriod0
1	b1UnavailablePeriod1
2	b1UnavailablePeriod2
3	b1Es15m0
4	b1Es15m1
5	b1Es15m2
6	b1Ses15m0
7	b1Ses15m1
8	b1Ses15m2
9	b1Bbe15m0
10	b1Bbe15m1
11	b1Bbe15m2
12	b1Es24h0
13	b1Es24h1
14	b1Es24h2
15	b1Ses24h0
16	b1Ses24h1
17	b1Ses24h2
18	b1Bbe24h0
19	b1Bbe24h1
20	b1Bbe24h2

.1.3.6.1.4.1.193.81.3.4.1.1.8.1.1

xfRLPMConfigTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.9 · 1 row entry · 29 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMConfigTable'

This table contains the alarm threshold values for RL PM

xfRLPMConfigEntry row .1.3.6.1.4.1.193.81.3.4.1.1.9.1

Entry in the xfRLPMConfigTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMSetThreshold15mESs

The 15 minute set threshold for ES.
Default value is 180.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.1

xfPMSetThreshold15mSESs

The 15 minute set threshold for SES.
Default value is 15.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.2

xfPMSetThreshold15mBBEs

The 15 minute set threshold for BBE.
Default value is 9900.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.3

xfPMResetThreshold15mESs

The 15 minute reset threshold for ES.
Default value is 20.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.4

xfPMResetThreshold15mSESs

The 15 minute reset threshold for SES.
Default value is 1.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.5

xfPMResetThreshold15mBBEs

The 15 minute reset threshold for BBE.
Default value is 200.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.6

xfPMSetThreshold24hESs

The 24 hours set threshold for ES.
Default value is 1500.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.7

xfPMSetThreshold24hSESs

The 24 hours set threshold for SES.
Default value is 20.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.8

xfPMSetThreshold24hBBEs

The 24 hours set threshold for BBE.
Default value is 48000.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.9

xfPMView

Enable/disable visibility of PM tables.
Default value: pmEnable(1)
Near end access: read-write
Far end access: No access

Enumerationr/w

Enumerated Values:

1	pmEnable
2	pmDisable

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.10

xfPMStatus

Threshold alarm status.
Values from rlts1Counter15m0(21) to tltmCounter24h2(50)
are related to obsoleted MOs.

Bits

Enumerated Values:

0	unavailablePeriod0
1	unavailablePeriod1
2	unavailablePeriod2
3	es15m0
4	es15m1
5	es15m2
6	ses15m0
7	ses15m1
8	ses15m2
9	bbe15m0
10	bbe15m1
11	bbe15m2
12	es24h0
13	es24h1
14	es24h2
15	ses24h0
16	ses24h1
17	ses24h2
18	bbe24h0
19	bbe24h1
20	bbe24h2
21	rlts1Counter15m0
22	rlts1Counter15m1
23	rlts1Counter15m2
24	rlts2Counter15m0
25	rlts2Counter15m1
26	rlts2Counter15m2
27	rltmCounter15m0
28	rltmCounter15m1
29	rltmCounter15m2
30	tlts1Counter15m0
31	tlts1Counter15m1
32	tlts1Counter15m2
33	tltmCounter15m0
34	tltmCounter15m1
35	tltmCounter15m2
36	rlts1Counter24h0
37	rlts1Counter24h1
38	rlts1Counter24h2
39	rlts2Counter24h0
40	rlts2Counter24h1
41	rlts2Counter24h2
42	rltmCounter24h0
43	rltmCounter24h1
44	rltmCounter24h2
45	tlts1Counter24h0
46	tlts1Counter24h1
47	tlts1Counter24h2
48	tltmCounter24h0
49	tltmCounter24h1
50	tltmCounter24h2

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.11

xfPMRLTS1Threshold

RLTS1 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.1 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always less than RL…

Integer32r/w

Constraints:
range: -999--201

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.12

xfPMSetThreshold15mRLTS1

Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Alw…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.13

xfPMResetThreshold15mRLTS1

Received Level 1 Threshold Second (RLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute int…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.14

xfPMRLTS2Threshold

RLTS2 Alarm Threshold for Minimum RF Input Power.
RF input level = value/10 dBm.
Domain: [-99.8 ... -20.0 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.
Always greater than…

Integer32r/w

Constraints:
range: -998--200

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.15

xfPMSetThreshold15mRLTS2

Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Set threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 15 minute interval.
Alw…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.16

xfPMResetThreshold15mRLTS2

Received Level 2 Threshold Second (RLTS2) 15 minute.
Alarm Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
for entire current 15 minute int…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.17

xfPMSetThreshold15mRLTM

Receive Level Tide Mark (RLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Input Power
in current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
Always grea…

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.18

xfPMResetThreshold15mRLTM

Receive Level Tide Mark (RLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Input Power
for entire current 15 minute interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]
A…

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.19

xfPMTLTS1Threshold

TLTS1 Alarm Threshold for Maximum RF Output Power.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.

Integer32r/w

Constraints:
range: -100-45

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.20

xfPMSetThreshold15mTLTS1

Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Set threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 15 minute interva…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.21

xfPMResetThreshold15mTLTS1

Transmitted Levels 1 Threshold Second (TLTS1) 15 minute.
Alarm Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
for entire current 15 minu…

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.22

xfPMSetThreshold15mTLTM

Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Set threshold for maximum allowed
max / min difference of RF Output Power
in current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
Always grea…

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.23

xfPMResetThreshold15mTLTM

Transmitted Level Tide Mark (TLTM) 15 minute.
Alarm Reset threshold for maximum allowed
max / min difference of RF Output Power
for entire current 15 minute interval.
RF output level = value dB.
Domain: [1 ... 145 dB]
A…

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.24

xfPMSetThreshold24hRLTS1

Received Level 1 Threshold Second (RLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS1 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval.

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.25

xfPMSetThreshold24hRLTS2

Received Level 2 Threshold Second (RLTS2) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Input Power are allowed below the
RLTS2 Alarm Threshold for Minimum RF Input Power
in current 24 hour interval.

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.26

xfPMSetThreshold24hRLTM

Receive Level Tide Mark (RLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Input Power
in current 24 hour interval.
RF input level = value/10 dB.
Domain: [1.0 ... 80.0 dB]

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.27

xfPMSetThreshold24hTLTS1

Transmitted Levels 1 Threshold Second (TLTS1) 24 hour.
Alarm Set / Reset threshold in number of seconds that
RF Output Power are allowed above the
TLTS1 Alarm Threshold for Maximum RF Output Power
in current 24 hour int…

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.28

xfPMSetThreshold24hTLTM

Transmitted Level Tide Mark (TLTM) 24 hour.
Alarm Set / Reset threshold for maximum allowed
max / min difference of RF Output Power
in current 24 hour interval.
RF output level = value dB.
Domain: [1 ... 145 dB]

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.9.1.29

xfRLPMCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.10 · 1 row entry · 20 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMCurrent24hTable'

TBD

xfRLPMCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.10.1

Entry in the xfRLPMCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMCurrent24hTimeElapsed The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.1`
xfPMCurrent24hESs Errored Seconds in the current 24-hour interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.2`
xfPMCurrent24hSESs Severely Errored Seconds in the current 24-hour interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.3`
xfPMCurrent24hBBEs Background Block Errors in the current 24 hour interval	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.4`
xfPMCurrent24hUASs Unavailable seconds (or Unavailable Time) in the current 24 hour interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.5`
xfPMCurrent24hBBs The number of Background Blocks in the current 24 hour interval.	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.6`
xfPMCurrent24hRLTS1 Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.7`
xfPMCurrent24hRLTS2 Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.8`
xfPMCurrent24hRLMin Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.9`
xfPMCurrent24hRLMax Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.10`
xfPMCurrent24hTLTS1 Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.11`
xfPMCurrent24hTLMin Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.12`
xfPMCurrent24hTLMax Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.13`
xfPMCurrent24hMSEMin Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.14`
xfPMCurrent24hMSEMax Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.15`
xfPMCurrent24hXPIMin Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.16`
xfPMCurrent24hXPIMax Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.17`
xfPMCurrent24hESR Error Seconds Ratio in the current 24-hour interval	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.18`
xfPMCurrent24hSESR Severely Error Seconds Ratio in the current 24-hour interval	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.19`
xfPMCurrent24hBBER Background Block Errors Ratio in the current 24-hour interval	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.10.1.20`

xfRLPMInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.11 · 1 row entry · 17 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMInterval24hTable'

TBD

xfRLPMInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.11.1

Entry in the xfRLPMInterval24hTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMInterval24hESs

The counter associated with the number of
Errored Seconds encountered by a SONET/SDH
Section in the previous 24-hour interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.1

xfPMInterval24hSESs

The counter associated with the number of Severely
Errored Seconds encountered by a SONET/SDH
Section in the previous 24-hour interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.2

xfPMInterval24hBBEs

The counter associated with the number of
Coding Violations (Errored Blocks)
encountered by a SONET/SDH Section in the
previous 24-hour interval.

HC-PerfHist-TC-MIBHCPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.3

xfPMInterval24hUASs

The number of UnAvailable Seconds encountered by
a SONET/SDH Section in the previous 24 hour
interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.4

xfPMInterval24hBBs

The number of Background Blocks in a
SONET/SDH Section in the previous
24 hour interval.

HC-PerfHist-TC-MIBHCPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.5

xfPMInterval24hValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.6

xfPMInterval24hRLTS1

Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the previous 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.7

xfPMInterval24hRLTS2

Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the previous 24 hour interval.
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.8

xfPMInterval24hRLMin

Indicate Min RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.9

xfPMInterval24hRLMax

Indicate Max RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.10

xfPMInterval24hTLTS1

Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the previous 24 hour interval
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.11

xfPMInterval24hTLMin

Indicate Min RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.12

xfPMInterval24hTLMax

Indicate Max RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.13

xfPMInterval24hMSEMin

Indicate Min MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.14

xfPMInterval24hMSEMax

Indicate Max MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.15

xfPMInterval24hXPIMin

Indicate Min Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.16

xfPMInterval24hXPIMax

Indicate Max Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.11.1.17

xfRLPMCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.12 · 1 row entry · 20 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMCurrent15mTable'

TBD

xfRLPMCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.12.1

Entry in the table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMCurrent15mElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.1`
xfPMCurrent15mESs Error seconds in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.2`
xfPMCurrent15mSESs Severely error seconds in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.3`
xfPMCurrent15mBBEs Background Block Errors in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.4`
xfPMCurrent15mUASs Unavailable seconds (or Unavailable Time) in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.5`
xfPMCurrent15mBBs The number of Background Blocks encountered by a SONET/SDH Section in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.6`
xfPMCurrent15mRLTS1 Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.7`
xfPMCurrent15mRLTS2 Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.8`
xfPMCurrent15mRLMin Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.9`
xfPMCurrent15mRLMax Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.10`
xfPMCurrent15mTLTS1 Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.11`
xfPMCurrent15mTLMin Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.12`
xfPMCurrent15mTLMax Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.13`
xfPMCurrent15mMSEMin Indicate Min MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.14`
xfPMCurrent15mMSEMax Indicate Max MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.15`
xfPMCurrent15mXPIMin Indicate Min Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.16`
xfPMCurrent15mXPIMax Indicate Max Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset.	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.17`
xfPMCurrent15mESR Error Seconds Ratio in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.18`
xfPMCurrent15mSESR Severely Error Seconds Ratio in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.19`
xfPMCurrent15mBBER Background Block Errors Ratio in the current 15 minute interval	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.12.1.20`

xfRLPMInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.13 · 1 row entry · 18 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMInterval15mTable'

TBD

xfRLPMInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.13.1

Entry in the table.

Indexes

IF-MIBifIndex xfPMInterval15mIntervalNumber

Column Syntax OID

xfPMInterval15mIntervalNumber

A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is …

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.1

xfPMInterval15mESs

Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.2

xfPMInterval15mSESs

Severely error seconds in the xfPDHCompInterval15mIntervalNumber
15 minute interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.3

xfPMInterval15mBBEs

Background Block Errors in the xfPDHCompInterval15mIntervalNumber
15 minute intervall.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.4

xfPMInterval15mUASs

UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber
15 minute interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.5

xfPMInterval15mBBs

Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.6

xfPMInterval15mValidData

This variable indicates if the data for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.7

xfPMInterval15mRLTS1

Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the previous 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.8

xfPMInterval15mRLTS2

Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the previous 15 minute interval.
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.9

xfPMInterval15mRLMin

Indicate Min RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.10

xfPMInterval15mRLMax

Indicate Max RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.11

xfPMInterval15mTLTS1

Transmitted Level 1 Threshold Second (TLTS1) 15 minute
Number of seconds that the RF Output Power was above the TLTS1
in the previous 15 minute interval
-1 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.12

xfPMInterval15mTLMin

Indicate Min RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.13

xfPMInterval15mTLMax

Indicate Max RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.14

xfPMInterval15mMSEMin

Indicate Min MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.15

xfPMInterval15mMSEMax

Indicate Max MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.16

xfPMInterval15mXPIMin

Indicate Min Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.17

xfPMInterval15mXPIMax

Indicate Max Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
Reset by xfTermPerfReset.

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.13.1.18

xfRLPtpTerminalXTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.14 · 1 row entry · 29 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPtpTerminalXTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPtpTerminalXTable'

Extension table to xfRLPtpTerminalTable.
The table is indexed with entLogicalIndex.

xfRLPtpTerminalXEntry row .1.3.6.1.4.1.193.81.3.4.1.1.14.1

Entry in the table

Indexes

ENTITY-MIBentLogicalIndex

Column Syntax OID

xfTermInterfaces

Interface constellation for the terminal

Enumerationr/w

Enumerated Values:

1	other
2	pdhToTdmHier
3	pdhToTdmFlat
4	pdhToTdmFlatAndBitpipeToPtp
5	pdhToTdmAndSDHToSFP
6	pdhToTdmAndSDHToPtp
7	pdhToTdmAndSDHToSFPHAndSDHToPtP

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.1

xfTermInterfacesCapability

Interface constellation capability for the terminal

Bits

Enumerated Values:

0	pdhToTdmHier
1	pdhToTdmFlat
2	pdhToTdmFlatAndBitpipeToPtp
3	pdhToTdmAndSDHToSFP
4	pdhToTdmAndSDHToPtp

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.2

xfTermChannelModeOperStatus

Channel mode for the terminal (operational status).
- ccdp(2): Co-Channel Dual Polarization (XPIC)
- accp(3): Adjacent Channels Co-Polarization (non-XPIC)
- acap(4): Adjacent Channels Alternate Polarization (non-XPIC)

ChannelMode

Type Values:

1	other
2	ccdp
3	accp
4	acap

Description:

Terminal channel mode

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.3

xfTermXPICRestore

Restore XPIC

Enumerationr/w

Enumerated Values:

1	xPicRestore

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.4

xfTermTribCapacityActual

Actual tributary capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.5

xfTermTribCapacityDesired

Desired tributary capacity

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.6

xfTermBitPipeCapacity

Bit pipe capacity, Kbps

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.7

xfTermRowIndex

Points to a row in xfRlPtpTerminalCapabilityTable

Integer32r/w

Constraints:
range: 1-100000

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.8

xfTermCapabilitiesLastChange

The value of sysUpTime at the time of the last creation or
deletion of an entry in the xfRLPtpTerminalCapabilityTable.
If the number of entries has been unchanged since the last
re-initialization of the local network ma…

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.9

xfTermActualRowIndex

The actual row that is pointed out in xfRlPtpTerminalCapabilityTable

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.10

xfTermMaxRowIndex

Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.11

xfTermAdaptiveManualRowIndex

Manual row index

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.12

xfTermAdaptiveManualMode

Adaptive manual mode
- other(1)
- disable(2)(default)
- enable(3)
- enabledAsRequest(4)

TermAdaptiveManualModer/w

Type Values:

1	other
2	disable
3	enable
4	enabledAsRequest

Description:

Adaptive Modulation mode

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.13

xfTermSpectrumEfficiencyClass

Spectrum Efficiency Class:
- other(1): unknown
- sec2(2): spectrum eff. Class 2
- sec3(3): spectrum eff. Class 3
- sec4L(4): spectrum eff. Class 4L
- sec4H(5): specturm eff. Class 4H
- sec5A(6): spectrum eff. Class 5A
-…

Enumerationr/w

Enumerated Values:

1	other
2	sec2
3	sec3
4	sec4L
5	sec4H
6	sec5A
7	sec5B
8	sec6A
9	sec6B

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.14

xfTermSpectrumEfficiencyClassCapability

Spectrum Efficiency Class Capability
- 0 Sec2 Spectrum eff. Class 2
- 1 Sec3 Specturm eff. Class 3
- 2 Sec4L Specturm eff. Class 4L
- 3 Sec4H Spectrum eff. Class 4H
- 4 Sec5A Spectrum eff. Class 5A
- 5 Sec5B Spectrum …

Bits

Enumerated Values:

0	sec2
1	sec3
2	sec4L
3	sec4H
4	sec5A
5	sec5B
6	sec6A
7	sec6B

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.15

xfTermIpAddress

LAN ip address

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.16

xfTermProtectionCapability

Terminal protection capability
- 0 Unprotected ............... The terminal supports 1+0
- 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby
- 2 protectedWorkingStandby ... The terminal supports 1+1 Wo…

Bits

Enumerated Values:

0	unprotected
1	protectedHotStandby
2	protectedWorkingStandby
3	unprotectedSD
4	nplus1
5	enhancedRLB

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.17

xfTermLineProtectionCapability

Terminal Line protection capability
- 0 unprotected .................
- 1 singleInterfaceLowSlot ......
- 2 singleInterfaceHighSlot .....
- 3 opticalSplitter .............
- 4 equipmentAndLineProtection ..

Bits

Enumerated Values:

0	unprotected
1	singleInterfaceLowSlot
2	singleInterfaceHighSlot
3	opticalSplitter
4	equipmentAndLineProtection

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.18

xfTermTribAllocationActual

Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link

Bits

Enumerated Values:

firstE1

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.19

xfTermTribAllocationDesired

Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link

Bitsr/w

Enumerated Values:

firstE1

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.20

xfTermAutoRemoveLoopEnable

Auto Remove Loops
- other(1)
- enable(2) (default)
- disable(3)

TermAutoRemoveLoopEnabler/w

Type Values:

1	other
2	enable
3	disable

Description:

Auto Removal loops

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.21

xfTermCapability

Terminal capability

Bits

Enumerated Values:

0	adaptiveManualTx
1	adaptiveManualRx
2	fragmentedTributaries
3	terminalCapacityLicense

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.22

xfTermCapacityLicense

Licensetable

Enumerationr/w

Enumerated Values:

0	vr0
1	vr10
2	vr25
3	vr50
4	vr100
5	vr15
6	vr30
7	vr60
8	vr125
9	vr200
10	vr350
11	vr4
12	vr500
13	vr150
14	vr250
15	vr300
16	vr400
17	vr450

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.23

xfTermFadingRates

Fading rates
- other(1): unknown
- fr50(2): 50dB/s HighTroughputMode (default)
- fr150(3): 100dB/s HighFadingResistanceMode

Enumerationr/w

Enumerated Values:

1	other
2	fr50
3	fr100

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.24

xfTermFadingRatesCapability

Fading rate capability
- fr50(0): HighTroughputMode
- fr100(1): HighFadingResistanceMode

Bits

Enumerated Values:

0	fr50
1	fr100

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.25

xfTermConfiguredBitPipeCapacity

Configured bit pipe capacity, Kbps

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.26

xfTermTribCapacityConfigured

Configured tributary capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.27

xfTermPacketMaxCapacity

Packet Max Capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.28

xfTermPacketMinCapacity

Packet Min Capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.14.1.29

xfRlPtpTerminalCapabilityTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.15 · 1 row entry · 10 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRlPtpTerminalCapabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRlPtpTerminalCapabilityTable'

Table for misc. capability informatio.

xfRlPtpTerminalCapabilityEntry row .1.3.6.1.4.1.193.81.3.4.1.1.15.1

Entry in the table

Indexes

ENTITY-MIBentLogicalIndex xfTermRowIndex

Column Syntax OID

xfTermChannelSpacing

Channel spacing
- ETSI: 3.5, 7, 14, 28, 40, 56 MHz
- ANSI: 10, 20, 30, 40, 50, 60 MHz

Enumeration

Enumerated Values:

0	chspUnknown
1	chsp7MHz
2	chsp14MHz
3	chsp20MHz
4	chsp28MHz
5	chsp30MHz
6	chsp40MHz
7	chsp50MHz
8	chsp56MHz
9	chsp10MHz
10	chsp3500kHz
11	chsp60MHz

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.1

xfTermChannelModulation

Channel modulation
- cqpsk(2) CQPSK
- qam16(3) 16-QAM
- qam128(4) 128-QAM
- qam32(5) 32-QAM
- qam64(6) 64-QAM
- qam4(7) 4-QAM
- qam8(8) 8-QAM
- qam256(9) 256-QAM
- qam512(10) 512-QAM
- qam1024(1…

TermModulation

Type Values:

1	other
2	cqpsk
3	qam16
4	qam128
5	qam32
6	qam64
7	qam4
8	qam8
9	qam256
10	qam512
11	qam1024

Description:

Channel Modulation

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.2

xfTermMaxTribCapacity

Max number of tributaries

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.3

xfTermDCNCapacity

DCN hop capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.4

xfTermValidRow

Max capacity license
- vr0(0) = invalid row
- vr10(1) = 10 Mbps, no license
- vr25(2) = 25 Mbps
- vr50(3) = 50 Mbps
- vr100(4) = 100 Mbps
- vr15(5) = 15 Mbps
- vr30(6) = 30 Mbps
- vr60(7) = 60 Mbps
- vr1…

Enumeration

Enumerated Values:

0	vr0
1	vr10
2	vr25
3	vr50
4	vr100
5	vr15
6	vr30
7	vr60
8	vr125
9	vr200
10	vr350
11	vr4
12	vr500
13	vr150
14	vr250
15	vr300
16	vr400
17	vr450

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.5

xfTermMaxCapacity

Max capacity

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.6

xfTermSpectrumEfficiencyClassObsoleteobsolete

xfTermSpectrumEfficiencyClassObsolete

TermRauSec

Type Values:

0	other
1	sec2
2	sec4
3	sec5b

Description:

Spectrum Effeciency Class

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.7

xfTermFrameFormatType

Frame format type
- fftOther(0)
- fftStatic(1)
- fftAdmod(2)
- fftXpic(3)
- fftXpicAdmod(4)
- fftLegacy(5)
- fftStaticLH(6)
- fftAdmodLH(7)
- fftXpicLH(8)
- fftXpicAdmodLH(9)
- fftAdmodStatic(10)
- fftXpicAdmodStatic(11…

Enumeration

Enumerated Values:

0	fftOther
1	fftStatic
2	fftAdmod
3	fftXpic
4	fftXpicAdmod
5	fftLegacy
6	fftStaticLH
7	fftAdmodLH
8	fftXpicLH
9	fftXpicAdmodLH
10	fftAdmodStatic
11	fftXpicAdmodStatic
12	fftAdmodStaticLH
13	fftXpicAdmodStaticLH

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.8

xfTermFrameFormatRev

Frame format revision

Enumeration

Enumerated Values:

1	ffOther
2	ffVersion0
3	ffVersion1
4	ffVersion2
5	ffVersion3
6	ffVersion4
7	ffVersion5
8	ffVersion6
9	ffVersion7
10	ffVersion8
11	ffVersion9
12	ffVersion10
13	ffVersion11
14	ffVersion12
15	ffVersion13
16	ffVersion14
17	ffVersion15

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.9

xfTermBerAlarmThresholdCapability

List of the allowed BER thresholds

Bits

Enumerated Values:

0	berThrCap1e3
1	berThrCap1e4
2	berThrCap1e5
3	berThrCap1e6

.1.3.6.1.4.1.193.81.3.4.1.1.15.1.10

xfRLPMAMConfigTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.16 · 1 row entry · 5 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMAMConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMAMConfigTable'

Alarm threshold values for RL PM

xfRLPMAMConfigEntry row .1.3.6.1.4.1.193.81.3.4.1.1.16.1

Entry in the xfRLPMAMConfigTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMAMSetThreshold15m

The 15 minute set threshold for AdMod.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.16.1.1

xfPMAMSetThreshold24h

The 24 hour set threshold for AdMod.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.16.1.2

xfPMAMResetThreshold15m

The 15 minute reset threshold for AdMod.
Near end access: read-write
Far end access: No access

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.16.1.3

xfPMAMStatus

Threshold alarm status

Bits

Enumerated Values:

0	am15m1
1	am15m2
2	am15m3
3	am24h1
4	am24h2
5	am24h3

.1.3.6.1.4.1.193.81.3.4.1.1.16.1.4

xfPMAMValidData

It reports which modulation's PM data that are valid.

Bits

Enumerated Values:

0	valid15m4QAM
1	valid15m8QAM
2	valid15m16QAM
3	valid15m32QAM
4	valid15m64QAM
5	valid15m128QAM
6	valid15m256QAM
7	valid15m512QAM
8	valid15m1024QAM

.1.3.6.1.4.1.193.81.3.4.1.1.16.1.5

xfRLPMAMCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.17 · 1 row entry · 18 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMAMCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMAMCurrent24hTable'

TBD

xfRLPMAMCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.17.1

Entry in the xfRLPMAMCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMAMCurrent24h4QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.1`
xfPMAMCurrent24h8QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.2`
xfPMAMCurrent24h16QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.3`
xfPMAMCurrent24h32QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.4`
xfPMAMCurrent24h64QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.5`
xfPMAMCurrent24h128QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.6`
xfPMAMCurrent24h256QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.7`
xfPMAMCurrent24h512QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.8`
xfPMAMCurrent24h1024QAM Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.9`
xfPMAMCurrent24h4QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.10`
xfPMAMCurrent24h8QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.11`
xfPMAMCurrent24h16QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.12`
xfPMAMCurrent24h32QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.13`
xfPMAMCurrent24h64QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.14`
xfPMAMCurrent24h128QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.15`
xfPMAMCurrent24h256QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.16`
xfPMAMCurrent24h512QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.17`
xfPMAMCurrent24h1024QAMEnRLB Valid time since reset	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.17.1.18`

xfRLPMAMInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.18 · 1 row entry · 19 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMAMInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMAMInterval24hTable'

TBD

xfRLPMAMInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.18.1

Entry in the xfRLPMAMInterval24hTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMAMInterval24h4QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.1

xfPMAMInterval24h8QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.2

xfPMAMInterval24h16QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.3

xfPMAMInterval24h32QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.4

xfPMAMInterval24h64QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.5

xfPMAMInterval24h128QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.6

xfPMAMInterval24h256QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.7

xfPMAMInterval24h512QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.8

xfPMAMInterval24hValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.9

xfPMAMInterval24h1024QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.10

xfPMAMInterval24h4QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.11

xfPMAMInterval24h8QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.12

xfPMAMInterval24h16QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.13

xfPMAMInterval24h32QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.14

xfPMAMInterval24h64QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.15

xfPMAMInterval24h128QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.16

xfPMAMInterval24h256QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.17

xfPMAMInterval24h512QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.18

xfPMAMInterval24h1024QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.18.1.19

xfRLPMAMCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.19 · 1 row entry · 18 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMAMCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMAMCurrent15mTable'

TBD

xfRLPMAMCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.19.1

Entry in the table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMAMCurrent15m4QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.1`
xfPMAMCurrent15m8QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.2`
xfPMAMCurrent15m16QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.3`
xfPMAMCurrent15m32QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.4`
xfPMAMCurrent15m64QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.5`
xfPMAMCurrent15m128QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.6`
xfPMAMCurrent15m256QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.7`
xfPMAMCurrent15m512QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.8`
xfPMAMCurrent15m1024QAM Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.9`
xfPMAMCurrent15m4QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.10`
xfPMAMCurrent15m8QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.11`
xfPMAMCurrent15m16QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.12`
xfPMAMCurrent15m32QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.13`
xfPMAMCurrent15m64QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.14`
xfPMAMCurrent15m128QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.15`
xfPMAMCurrent15m256QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.16`
xfPMAMCurrent15m512QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.17`
xfPMAMCurrent15m1024QAMEnRLB Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.19.1.18`

xfRLPMAMInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.20 · 1 row entry · 20 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMAMInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMAMInterval15mTable'

TBD

xfRLPMAMInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.20.1

Entry in the table.

Indexes

IF-MIBifIndex xfPMAMInterval15mIntervalNumber

Column Syntax OID

xfPMAMInterval15mIntervalNumber

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.1

xfPMAMInterval15m4QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.2

xfPMAMInterval15m8QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.3

xfPMAMInterval15m16QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.4

xfPMAMInterval15m32QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.5

xfPMAMInterval15m64QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.6

xfPMAMInterval15m128QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.7

xfPMAMInterval15m256QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.8

xfPMAMInterval15m512QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.9

xfPMAMInterval15mValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.10

xfPMAMInterval15m1024QAM

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.11

xfPMAMInterval15m4QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.12

xfPMAMInterval15m8QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.13

xfPMAMInterval15m16QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.14

xfPMAMInterval15m32QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.15

xfPMAMInterval15m64QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.16

xfPMAMInterval15m128QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.17

xfPMAMInterval15m256QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.18

xfPMAMInterval15m512QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.19

xfPMAMInterval15m1024QAMEnRLB

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.1.1.20.1.20

xfRLPtpTerminalCapacityLicenseTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.21 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPtpTerminalCapacityLicenseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPtpTerminalCapacityLicenseTable'

TBD

xfRLPtpTerminalCapacityLicenseEntry row .1.3.6.1.4.1.193.81.3.4.1.1.21.1

Entry in the table.

Indexes

ENTITY-MIBentLogicalIndex xfTermRowIndex

Column Syntax OID

xfTermCapacityLicenseRange

Enumeration

Enumerated Values:

0	vr0
1	vr10
2	vr25
3	vr50
4	vr100
5	vr15
6	vr30
7	vr60
8	vr125
9	vr200
10	vr350
11	vr4
12	vr500
13	vr150
14	vr250
15	vr300
16	vr400
17	vr450

.1.3.6.1.4.1.193.81.3.4.1.1.21.1.1

xfTermMaxCapacityRange

TermMaxCapacityRange

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.21.1.2

xfTermMaxTribCapacityRange

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.21.1.3

xfRLPMSDCGainCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.22 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMSDCGainCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMSDCGainCurrent15mTable'

This table monitors the time spent in each SDC gain value in the current 15 minute period.

xfRLPMSDCGainCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.22.1

Entry in xfRLPMSDCGainCurrent15mTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMSDCGainCurrent15m0005dB The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.1`
xfPMSDCGainCurrent15m0510dB The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.2`
xfPMSDCGainCurrent15m1015dB The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.3`
xfPMSDCGainCurrent15m1520dB The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.4`
xfPMSDCGainCurrent15m2025dB The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.5`
xfPMSDCGainCurrent15m2530dB The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.22.1.6`

xfRLPMSDCGainInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.23 · 1 row entry · 7 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMSDCGainInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMSDCGainInterval15mTable'

This table collects the time spent in each SDC gain value for the 15 minute intervals.

xfRLPMSDCGainInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.23.1

Entry in xfRLPMSDCGainInterval15mTable.

Indexes

IF-MIBifIndex xfPMSDCGainInterval15mIntervalNumber

Column	Syntax	OID
xfPMSDCGainInterval15mIntervalNumber A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is …	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.1`
xfPMSDCGainInterval15m0005dB The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.2`
xfPMSDCGainInterval15m0510dB The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.3`
xfPMSDCGainInterval15m1015dB The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.4`
xfPMSDCGainInterval15m1520dB The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.5`
xfPMSDCGainInterval15m2025dB The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.6`
xfPMSDCGainInterval15m2530dB The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.23.1.7`

xfRLPMSDCGainCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.24 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMSDCGainCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMSDCGainCurrent24hTable'

This table monitors the time spent in each SDC gain value in the current 24 hours period.

xfRLPMSDCGainCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.24.1

Entry in xfRLPMSDCGainCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMSDCGainCurrent24h0005dB The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.1`
xfPMSDCGainCurrent24h0510dB The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.2`
xfPMSDCGainCurrent24h1015dB The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.3`
xfPMSDCGainCurrent24h1520dB The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.4`
xfPMSDCGainCurrent24h2025dB The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.5`
xfPMSDCGainCurrent24h2530dB The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.1.1.24.1.6`

xfRLPMSDCGainInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.25 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMSDCGainInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMSDCGainInterval24hTable'

This table collects the time spent in each SDC gain value for the 24 hours interval.

xfRLPMSDCGainInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.25.1

Entry in xfRLPMSDCGainInterval24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMSDCGainInterval24h0005dB The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.1`
xfPMSDCGainInterval24h0510dB The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.2`
xfPMSDCGainInterval24h1015dB The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.3`
xfPMSDCGainInterval24h1520dB The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.4`
xfPMSDCGainInterval24h2025dB The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.5`
xfPMSDCGainInterval24h2530dB The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB.	PerfHist-TC-MIBPerfIntervalCount	`.1.3.6.1.4.1.193.81.3.4.1.1.25.1.6`

xfRLPMSDCGainConfigTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.26 · 1 row entry · 4 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMSDCGainConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLPMSDCGainConfigTable'

xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables.

xfRLPMSDCGainConfigEntry row .1.3.6.1.4.1.193.81.3.4.1.1.26.1

Entry in xfRLPMSDCGainConfigTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMSDCGainSetThreshold15m

The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 180.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.26.1.1

xfPMSDCGainSetThreshold24h

The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 1500.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.26.1.2

xfPMSDCGainResetThreshold15m

The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB.
Default value is 20.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.1.1.26.1.3

xfPMSDCGainStatus

Threshold crossing SDC alarm status.

Bits

Enumerated Values:

0	sdcGain15m
1	sdcGain24h

.1.3.6.1.4.1.193.81.3.4.1.1.26.1.4

xfRLExtRFPMConfigTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.27 · 1 row entry · 20 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRFPMConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRFPMConfigTable'

This table contains the alarm threshold values for RL Extended RF PM.
Its index id the RF IF ifIndex.

xfRLExtRFPMConfigEntry row .1.3.6.1.4.1.193.81.3.4.1.1.27.1

Entry in the xfRLExtRFPMConfigTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfExtRFPMRLTS1Threshold

Integer32r/w

Constraints:
range: -999--201

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.1

xfExtRFPMSetThreshold15mRLTS1

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.2

xfExtRFPMResetThreshold15mRLTS1

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.3

xfExtRFPMRLTS2Threshold

Integer32r/w

Constraints:
range: -998--200

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.4

xfExtRFPMSetThreshold15mRLTS2

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.5

xfExtRFPMResetThreshold15mRLTS2

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.6

xfExtRFPMSetThreshold15mRLTM

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.7

xfExtRFPMResetThreshold15mRLTM

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.8

xfExtRFPMTLTS1Threshold

TLTS1 Alarm Threshold for Maximum RF Output Power.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
Valid for both 15 m & 24 h intervals.
If changed current interval PM data must be reset.

Integer32r/w

Constraints:
range: -100-45

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.9

xfExtRFPMSetThreshold15mTLTS1

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.10

xfExtRFPMResetThreshold15mTLTS1

Integer32r/w

Constraints:
range: 1-900

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.11

xfExtRFPMSetThreshold15mTLTM

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.12

xfExtRFPMResetThreshold15mTLTM

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.13

xfExtRFPMSetThreshold24hRLTS1

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.14

xfExtRFPMSetThreshold24hRLTS2

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.15

xfExtRFPMSetThreshold24hRLTM

Integer32r/w

Constraints:
range: 10-800

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.16

xfExtRFPMSetThreshold24hTLTS1

Integer32r/w

Constraints:
range: 1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.17

xfExtRFPMSetThreshold24hTLTM

Integer32r/w

Constraints:
range: 1-145

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.18

xfExtRFPMStatus

Threshold alarm status

Bits

Enumerated Values:

0	rlts1Counter15m0
1	rlts1Counter15m1
2	rlts1Counter15m2
3	rlts2Counter15m0
4	rlts2Counter15m1
5	rlts2Counter15m2
6	rltmCounter15m0
7	rltmCounter15m1
8	rltmCounter15m2
9	tlts1Counter15m0
10	tlts1Counter15m1
11	tlts1Counter15m2
12	tltmCounter15m0
13	tltmCounter15m1
14	tltmCounter15m2
15	rlts1Counter24h0
16	rlts1Counter24h1
17	rlts1Counter24h2
18	rlts2Counter24h0
19	rlts2Counter24h1
20	rlts2Counter24h2
21	rltmCounter24h0
22	rltmCounter24h1
23	rltmCounter24h2
24	tlts1Counter24h0
25	tlts1Counter24h1
26	tlts1Counter24h2
27	tltmCounter24h0
28	tltmCounter24h1
29	tltmCounter24h2

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.19

xfExtRFPMView

Enable/disable visibility of PM tables.
Default value: extPmEnable(1)
Near end access: read-write
Far end access: No access

Enumerationr/w

Enumerated Values:

1	extPmEnable
2	extPmDisable

.1.3.6.1.4.1.193.81.3.4.1.1.27.1.20

xfRLExtRFPMCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.28 · 1 row entry · 8 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRFPMCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRFPMCurrent24hTable'

Current 24h Extended RF PM table.
Its index is RF IF ifIndex

xfRLExtRFPMCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.28.1

Entry in the xfRLExtRFPMCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfExtRFPMCurrent24hElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.1`
xfExtRFPMCurrent24hRLTS1 Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfRes…	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.2`
xfExtRFPMCurrent24hRLTS2 Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfRes…	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.3`
xfExtRFPMCurrent24hRLMin Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminal…	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.4`
xfExtRFPMCurrent24hRLMax Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalP…	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.5`
xfExtRFPMCurrent24hTLTS1 Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerf…	Integer32 Constraints: `range: -1-86400`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.6`
xfExtRFPMCurrent24hTLMin Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformance…	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.7`
xfExtRFPMCurrent24hTLMax Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformance…	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.28.1.8`

xfRLExtRFPMInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.29 · 1 row entry · 8 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRFPMInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRFPMInterval24hTable'

Interval 24h Extended RF PM table.
Its index is RF IF ifIndex

xfRLExtRFPMInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.29.1

Entry in the xfRLExtRFPMInterval24hTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfExtRFPMInterval24hRLTS1

Received Level 1 Threshold Second (RLTS1) 24 hour.
Number of seconds that the RF Input Power was below the RLTS1
in the previous 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfRe…

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.1

xfExtRFPMInterval24hRLTS2

Received Level 2 Threshold Second (RLTS2) 24 hour.
Number of seconds that the RF Input Power was below the RLTS2
in the previous 24 hour interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPerfRe…

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.2

xfExtRFPMInterval24hRLMin

Indicate Min RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminal…

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.3

xfExtRFPMInterval24hRLMax

Indicate Max RF Input level in previous 24 hour interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminal…

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.4

xfExtRFPMInterval24hTLTS1

Transmitted Level 1 Threshold Second (TLTS1) 24 hour.
Number of seconds that the RF Output Power was above the TLTS1
in the previous 24 hour interval
-1 indicates invalid value.
The instances are reset by:
* xfTermPer…

Integer32

Constraints:
range: -1-86400

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.5

xfExtRFPMInterval24hTLMin

Indicate Min RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanc…

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.6

xfExtRFPMInterval24hTLMax

Indicate Max RF Output level in previous 24 hour interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanc…

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.7

xfExtRFPMInterval24hValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.29.1.8

xfRLExtRFPMCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.30 · 1 row entry · 8 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRFPMCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRFPMCurrent15mTable'

Current 15m Extended RF PM table.
Its index is RF IF ifIndex

xfRLExtRFPMCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.30.1

Entry in the table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfExtRFPMCurrent15mElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.1`
xfExtRFPMCurrent15mRLTS1 Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerf…	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.2`
xfExtRFPMCurrent15mRLTS2 Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerf…	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.3`
xfExtRFPMCurrent15mRLMin Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTermina…	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.4`
xfExtRFPMCurrent15mRLMax Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTermina…	Integer32 Constraints: `range: -999--200` `range: 0-0`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.5`
xfExtRFPMCurrent15mTLTS1 Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermP…	Integer32 Constraints: `range: -1-900`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.6`
xfExtRFPMCurrent15mTLMin Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerforman…	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.7`
xfExtRFPMCurrent15mTLMax Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerforman…	Integer32 Constraints: `range: -100-45` `range: 255-255`	`.1.3.6.1.4.1.193.81.3.4.1.1.30.1.8`

xfRLExtRFPMInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.31 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRFPMInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRFPMInterval15mTable'

Interval 15m Extended RF PM table.
Its index is RF IF ifIndex

xfRLExtRFPMInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.31.1

Entry in the table.

Indexes

IF-MIBifIndex xfExtRFPMInterval15mIntervalNumber

Column Syntax OID

xfExtRFPMInterval15mIntervalNumber

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.1

xfExtRFPMInterval15mRLTS1

Received Level 1 Threshold Second (RLTS1) 15 minute
Number of seconds that the RF Input Power was below the RLTS1
in the previous 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPer…

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.2

xfExtRFPMInterval15mRLTS2

Received Level 2 Threshold Second (RLTS2) 15 minute
Number of seconds that the RF Input Power was below the RLTS2
in the previous 15 minute interval.
-1 indicates invalid value.
The instances are reset by:
* xfTermPer…

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.3

xfExtRFPMInterval15mRLMin

Indicate Min RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTermin…

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.4

xfExtRFPMInterval15mRLMax

Indicate Max RF Input level in previous 15 minute interval.
RF input level = value/10 dBm.
Domain: [-99.9 ... -20.0 dBm]
0 (zero) indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTermin…

Integer32

Constraints:
range: -999--200
range: 0-0

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.5

xfExtRFPMInterval15mTLTS1

Integer32

Constraints:
range: -1-900

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.6

xfExtRFPMInterval15mTLMin

Indicate Min RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerforma…

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.7

xfExtRFPMInterval15mTLMax

Indicate Max RF Output level in previous 15 minute interval.
RF output level = value dBm.
Domain: [-100 ... 45 dBm]
255 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerforma…

Integer32

Constraints:
range: -100-45
range: 255-255

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.8

xfExtRFPMInterval15mValidData

This variable indicates if the data for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.31.1.9

xfRLExtRAUPMCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.32 · 1 row entry · 5 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRAUPMCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRAUPMCurrent24hTable'

Current 24h Extended RAU PM table.
Its index is RAU IF ifIndex

xfRLExtRAUPMCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.32.1

Entry in the xfRLExtRAUPMCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfExtRAUPMCurrent24hElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.32.1.1`
xfExtRAUPMCurrent24hMSEMin Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTab…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.32.1.2`
xfExtRAUPMCurrent24hMSEMax Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTab…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.32.1.3`
xfExtRAUPMCurrent24hXPIMin Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xf…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.32.1.4`
xfExtRAUPMCurrent24hXPIMax Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xf…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.32.1.5`

xfRLExtRAUPMInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.33 · 1 row entry · 5 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRAUPMInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRAUPMInterval24hTable'

Interval 24h Extended RAU PM table.
Its index is RAU IF ifIndex

xfRLExtRAUPMInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.1.1.33.1

Entry in the xfRLExtRAUPMInterval24hTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfExtRAUPMInterval24hMSEMin

Indicate Min MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTa…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.33.1.1

xfExtRAUPMInterval24hMSEMax

Indicate Max MSE level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformanceTa…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.33.1.2

xfExtRAUPMInterval24hXPIMin

Indicate Min Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in x…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.33.1.3

xfExtRAUPMInterval24hXPIMax

Indicate Max Cross-Polar Interference (XPI) level
in previous 24 hour interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in x…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.33.1.4

xfExtRAUPMInterval24hValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.33.1.5

xfRLExtRAUPMCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.34 · 1 row entry · 5 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRAUPMCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRAUPMCurrent15mTable'

Current 15m Extended RAU PM table.
Its index is RF IF ifIndex

xfRLExtRAUPMCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.34.1

Entry in the xfRLExtRAUPMCurrent15mTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfExtRAUPMCurrent15mElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.1.1.34.1.1`
xfExtRAUPMCurrent15mMSEMin Indicate Min MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceT…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.34.1.2`
xfExtRAUPMCurrent15mMSEMax Indicate Max MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceT…	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.34.1.3`
xfExtRAUPMCurrent15mXPIMin Indicate Min Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in …	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.34.1.4`
xfExtRAUPMCurrent15mXPIMax Indicate Max Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in …	Integer32 Constraints: `range: -1000-1000` `range: 2000-2000`	`.1.3.6.1.4.1.193.81.3.4.1.1.34.1.5`

xfRLExtRAUPMInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.1.1.35 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLExtRAUPMInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-TERMINAL-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-TERMINAL-MIB::xfRLExtRAUPMInterval15mTable'

Interval 15 Extended RAU PM table.
Its index is RAU IF ifIndex

xfRLExtRAUPMInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.1.1.35.1

Entry in the xfRLExtRAUPMInterval15mTable.

Indexes

IF-MIBifIndex xfExtRAUPMInterval15mIntervalNumber

Column Syntax OID

xfExtRAUPMInterval15mIntervalNumber

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.1

xfExtRAUPMInterval15mMSEMin

Indicate Min MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformance…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.2

xfExtRAUPMInterval15mMSEMax

Indicate Max MSE level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in xfRLPtpTerminalPerformance…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.3

xfExtRAUPMInterval15mXPIMin

Indicate Min Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.4

xfExtRAUPMInterval15mXPIMax

Indicate Max Cross-Polar Interference (XPI) level
in previous 15 minute interval.
Input level = value/10 dB.
Domain: [-100.0 ... 100.0 dB]
2000 indicates invalid value.
The instances are reset by:
* xfTermPerfReset in…

Integer32

Constraints:
range: -1000-1000
range: 2000-2000

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.5

xfExtRAUPMInterval15mValidData

This variable indicates whether the data
for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.1.1.35.1.6