WWP-EXT-BRIDGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
26

wwpPortTable

table
.1.3.6.1.4.1.6141.2.4.1.1.1 · 1 row entry · 19 columns
Open in standard view 
Table of Ports.
wwpPortEntry entry .1.3.6.1.4.1.6141.2.4.1.1.1.1
Port Entry in the Table.
Indexes
wwpPortId
Column Syntax OID
wwpPortId
Port ID for the instance. Port ID's start at 1, and are
consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.1
wwpPortType
The port type for the port.
Enumeration
Enumerated Values:
1lx
2fastEth
3voip
4sx
5hundredFx
6unknown
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.2
wwpPortName
Friendly name for the port.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.3
wwpPortPhysAddr
The ethernet MAC address for the port. This information can also
be achieved via dot1dTpFdbTable
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.4
wwpPortAutoNeg
The object sets the port to AUTO NEG MOde and vice versa.
Specific platforms may have requirements of configuring
speed before moving the port to out of AUTO-NEG mode.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.5
wwpPortAdminStatus
The desired state of the port.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.6
wwpPortOperStatus
The current operational state of Port.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.7
wwpPortAdminSpeed
Desired speed of the port.
Set the port speed to be either 10MB, 100MB, or gig.
The Management Station can't set the wwpPortAdminSpeed to auto.
The default value for this object depends upon the platform.
Enumerationr/w
Enumerated Values:
1tenMb
2hundredMb
3gig
4auto
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.8
wwpPortOperSpeed
The current operational speed of the port in MB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.9
wwpPortAdminDuplex
The desired mode for the port. It can be set to either half or full duplex
operation but not to auto.The default value for this object
depends upon the platform.
Enumerationr/w
Enumerated Values:
1half
2full
3auto
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.10
wwpPortOperDuplex
The current duplex mode of the port.
Enumeration
Enumerated Values:
1half
2full
3auto
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.11
wwpPortAdminFlowCtrl
Configures the ports flow control operation. Need to check
802.3x for additional modes for gig ports.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.12
wwpPortOperFlowCtrl
Shows ports flow control configuration.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.13
wwpPortTagged
The port tagged Status can be set to tagged or untagged. If a port
is part of more than one VLAN, then the port Status should be 'tagged'.
Enumerationr/w
Enumerated Values:
0untagged
1tagged
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.14
wwpPortUntaggedPriority
The 802.1p packet priority to be assigned to packets associated
with this port that do not have an 802.1Q VLAN header.
Enumerationr/w
Enumerated Values:
0p0
1p1
2p2
3p3
4p4
5p5
6p6
7p7
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.15
wwpPortMaxFrameSize
Setting this object will set the max frame size allowed on a
port. The max frame size can vary between 1522 bytes till
9216 bytes. Default value is 1522 bytes
Integer32r/w
Constraints:
range: 1522-9126
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.16
wwpPortIngressFiltering
When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.17
wwpPortRateLimitState
When set to true, the rate limiting mechanism is enabled for
this port. When set to false, the rate limiting mechanism
is disabled for this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.18
wwpPortRateLimitValue
The value of this object represents the desired bit-rate limit
for this port. When the rate limiting mechanism is enabled for
this port, this value is enforced to the best extent possible by
the device.
…
Bits per secondInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.4.1.1.1.1.19

wwpVlanTable

table
.1.3.6.1.4.1.6141.2.4.1.2.5 · 1 row entry · 6 columns
Open in standard view 
VLAN table
wwpVlanEntry entry .1.3.6.1.4.1.6141.2.4.1.2.5.1
table of VLANs
Indexes
wwpVlanId
Column Syntax OID
wwpVlanId
802.1Q VLAN ID (1-4094)
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.1
wwpVlanName
Name associated with this VLAN.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.2
wwpVlanCurrentEgressPorts
The set of ports which are transmitting traffic for
this VLAN as either tagged or untagged frames.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.3
wwpVlanCurrentUntaggedPorts
The set of ports which are transmitting traffic for
this VLAN as untagged frames.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.4
wwpVlanMgmtStatus
Indicates if this VLAN is a management VLAN. The system
can have at most one remote management VLAN, and one local
management VLAN. Any VLAN can be set either to remoteMgmtVlan or
localMgmtvlan.
Enumerationr/w
Enumerated Values:
0notMgmtVlan
1remoteMgmtVlan
2localMgmtVlan
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.5
wwpVlanRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, there should …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6141.2.4.1.2.5.1.6

wwpVlanXTable

table
.1.3.6.1.4.1.6141.2.4.1.2.6 · 1 row entry · 1 columns
Open in standard view 
Extension of the VLAN table
wwpVlanXEntry entry .1.3.6.1.4.1.6141.2.4.1.2.6.1
Entry in the extended VLAN table.
Indexes
No indexes recorded
Column Syntax OID
wwpVlanTunnel
Enable/disable VLAN tunneling on this VLAN.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.6141.2.4.1.2.6.1.1