WAN-MIB Table View

Internal Wan Port configuration table.
Each entry in the table specifies the configuration of
an internal port, connecting the WAN blade to the host
switch.

intWanPortEntry row .1.3.6.1.4.1.6889.2.1.6.1.1.1.1

Table of port configuration entries.

Indexes

intWanGroupID intWanPortID

Column	Syntax	OID
intWanGroupID The Id of the group in which the port to be configured resides.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.1
intWanPortID The Id of the port to be configured.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.2
intWanPortSpeed This parameter defines the port speed: ethernet(1) and fastEthernet(2).	Enumerationr/w Enumerated Values: 1 ethernet 2 fastEthernet 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.3
intWanPortMode The flow control mode of the port when operated in full duplex: halfDuplex(1) - Half duplex connection, standard mode for segment fullDuplexNoPause(2) - Full duplex connection without exchanging flow control packets ful…	Enumerationr/w Enumerated Values: 1 halfDuplex 7 fullDuplexSymPause 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.4
intWanPortAutoNegotiation This object define if the Auto Sense /Auto Negotiation process is enable(1) or disable (2) for modules that don't support the Auto Snese mode please define the notSupported option..	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.5
intWanPortVLANMode This item defines the VLAN operation mode of the port: perPortOnly(1) - indicates that all received packets are mapped to the VLAN, defined on the port, and packets are transmitted in untagged format; …	Enumerationr/w Enumerated Values: 1 perPortOnly 2 dot1QTagging 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.6
intWanPortVLANBindingMode VLAN binding mode assigned to this port. static - this port supports only the egress VLAN list as configured manually in its corresponding dot1qVlanStaticEgressPort. This is the default VLAN Binding mode. bindToReceive …	Enumerationr/w Enumerated Values: 1 static 2 bindToReceive 3 bindToAll 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.7
intWanPortVlanList An 4096-bit-long bitmask of all vlans supported on a port. For example: A 1 bit in the 10th place means that vlan 10 is supported.	OctetStringr/w	.1.3.6.1.4.1.6889.2.1.6.1.1.1.1.8

This table is used to quickly assign members to a ds0Bunbdle
Its effect is similar as using the ifStack table,
only it does it in one go.

ds0BundleMemmbersEntry row .1.3.6.1.4.1.6889.2.1.6.1.1.2.1

An entry in yhr ds0BundleMembers table

Indexes

DS0BUNDLE-MIBdsx0BundleIndex

Column	Syntax	OID
ds0BundleMemmbersList A bit mask of timeslots that are part of the channel group identified by ds0BundleIndex. First (leftmost) bit stands for timeslot 0.	OctetStringr/w	.1.3.6.1.4.1.6889.2.1.6.1.1.2.1.1
ds0BundleSpeedFactor The speed factor for this ds0bundle. This can either be 56k or 64k.	Enumerationr/w Enumerated Values: 1 a64kbps 2 a56kbps	.1.3.6.1.4.1.6889.2.1.6.1.1.2.1.2

The ifTableXtndTable table.

ifTableXtndEntry row .1.3.6.1.4.1.6889.2.1.6.2.2.1.1

This table is an extension of the itTable.
It contains a row per every row of the ifTable.

It is used to perform additional configuration,
not available through standard mibs.
A row will exist in this tabl…

Indexes

ifTableXtndIndex

Column	Syntax	OID
ifTableXtndIndex The index in the ifTable for which this row is providing information.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.1
ifTableXtndPeerAddress The IP Address of the peer device on the link identified by this ifIndex. This value is only meaningful for point to point links.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.2
ifTableXtndVoIPQueue Turns voip-queueing on or off or turn fair-queuing on.	Enumerationr/w Enumerated Values: 1 on 2 off 3 fairQ 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.3
ifTableXtndCableLength Cable length attenuation on this interface.	Enumerationr/w Enumerated Values: 1 long15db 2 long22dot5db 3 long7dot5db 4 long0db 5 short133ft 6 short266ft 7 short399ft 8 short533ft 9 short655ft 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.4
ifTableXtndGain The gain on this interface.	Enumerationr/w Enumerated Values: 1 a26 2 a36 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.5
ifTableXtndDescription This object is a Read-Write equivalent of ifDescr. It is used to enable users to change the value of ifDescr.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.6
ifTableXtndKeepAlive Time, in seconds, between keepalive messages. 0 means keepalive should not be used, or is not supported.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.7
ifTableXtndMtu This object is a R/W copy of the ifMtu object from the ifTable. It enables changing of the MTU for interfaces that allow this.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.8
ifTableXtndInvertTxClock This object is only applicable for rs232-like synchronuos DTE interefaces. It determines whether the transmit clock is inverted.	OnOffr/w Type Values: 1 on 2 off 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.9
ifTableXtndDTELoopback This object is only applicable for rs232-like synchronuos DTE interefaces. It determines the status of the DTE loopback.	OnOffr/w Type Values: 1 on 2 off 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.10
ifTableXtndIgnoreDCD This object is only applicable for rs232-like synchronuos DTE interefaces. This command configures the serial interface to monitor the DSR/CTS signals, instead of DCD signal, as the line up/down indicator.	OnOffr/w Type Values: 1 on 2 off 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.11
ifTableXtndIdleChars This object is only applicable for rs232-like synchronuos DTE interefaces. This command sets the bit pattern used to indicate an idle line.	Enumerationr/w Enumerated Values: 1 flag 2 mark 3 space 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.12
ifTableXtndBandwidth This object is used to determine the bandwidth of the interface, in Kbps, for interfaces that support it. This information is informational, and does not affect the actual transmission rate.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.13
ifTableXtndEncapsulation Applicable only to layer 1 interfaces. The type of the layer 2 interface on top of this Interface. ppp - The Layer 2 interface is PPP frameRelay - The Layer 2 interface is IETF Frame Relay. pppoe - PPPoE-…	Enumerationr/w Enumerated Values: 1 ppp 2 frameRelay 3 pppoe 4 arpa 5 frameRelayNonIetf 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.14
ifTableXtndOperStatus An extension to ifOperStatus, for showing faults and partial faliures, including aggregation of upper layer faults (up to but not including L3). The following Pseudo code describes how the MIB value is calculated for …	Enumeration Enumerated Values: 1 up 2 faultDown 3 testing 4 partiallyDownFault 5 adminDown 6 dormantDown 7 xtndKeepAliveDown 8 modemUndetected 9 modemReady 10 modemDialing 11 modemConnectedDialin 12 modemConnectedDialout 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.15
ifTableXtndBackupCapabilities Determines what roles an interface can play in a backup relation. This should be filled per interface, according to its capabilities. primaryAndBackup - the interface can be play both the …	Enumeration Enumerated Values: 1 primaryAndBackUp 2 primaryOnly 3 backupOnly 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.16
ifTableXtndBackupIf The ifIndex of the backup interface for this primary interface. 0 if no backup is defined. The agent will not permit setting this value, if: The intreface is not capable of the primary ro…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.17
ifTableXtndBackupEnableDelay The delay (in Secs) that a primary interface must be inactive before its backup interface is activated. Configurable on the primary interface only.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.18
ifTableXtndBackupDisableDelay The delay (in Secs) between the primary coming back to life and its activation and de-activation of its backup interface. The value '-1' means that the primary is never re-activated and the backup is never de-activat…	Integer32r/w Constraints: range: -1-3600	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.19
ifTableXtndPrimaryIf On a backup interface, this will point to the primary interface. '0' means no primary interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.20
ifTableXtndCarrierDelay This command sets the carrier delay on a serial interface in seconds. If a link goes down and comes back up before the carrier delay timer expires, the down state is effectively filtered, and the switch is not aware …	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.21
ifTableXtndDtrRestartDelay Determines the period in seconds for deactivating DTR signal when the serial line is inactive.	Integer32r/w Constraints: range: 0-900	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.22
ifTableXtndDtrPulseTime Determines the interval in milliseconds DTR signal is held inactive when the serial line is inactive.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.23
ifTableXtndLoadInterval Determines interval (in secs) for exponential averages calculations for an interface. Must be a multiple of 30.	Integer32r/w Constraints: range: 30-600	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.24
ifTableXtndInputRate Expoential Average of the Number of bits received per second calculated for the interval specified in ifTableXtndLoadInterval. The exponentail average smooths peaks while correctly showing current trends. …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.25
ifTableXtndOutputRate Expoential Average of the Number of bits sent per second calculated for the interval specified in ifTableXtndLoadInterval. The exponentail average smooths peaks while correctly showing current trends. …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.26
ifTableXtndInputLoad Expoential Average of the Input Load calculated for the interval specified in ifTableXtndLoadInterval. Load is expressed a a number in the range 1 to 255. 255 = 100% utilization (input bits per second equal the interfa…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.27
ifTableXtndOutputLoad Expoential Average of the Output Load calculated for the interval specified in ifTableXtndLoadInterval. Load is expressed a a number in the range 1 to 255. 255 = 100% utilization (input bits per second equal the interf…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.28
ifTableXtndReliability Expoential Average of the Reliability of an interface calculated for the interval specified in ifTableXtndLoadInterval. Reliability is expressed a a number in the range 1 to 255. 255 = Fully Reliable in…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.29
ifTableXtndTrafficShaperRate This item controls a traffic shaper on the interface. Its value is the shaping rate in bits per seconds. When zero, the shaper is disabled	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.30
ifTableXtndCacBBL Dynamic CAC Bearer Bandwidth Limit in kilo-bits-per-seconds. This item equals -1 when dynamic CAC is not configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.31
ifTableXtndCacPriority If more than one interface with configured BBL is up, the gateway reports the BBL of the interface with the highest activation priority value. If N active interfaces shares the same highest CAC activation priority. …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.32
ifTableXtndCacifStatus Dynamic CAC status of the interface.	Enumeration Enumerated Values: 1 notConfigured 2 active 3 notActive 4 activeECMP 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.33
ifTableXtndCommonApplifStatus Supported Application on this Interface. If 0 value - Not supported else supported. Bit 0 - Unknown Application. Bit 1 - Support of Next Hop Interface in Policy Based Routing Application.	OctetString	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.34
ifTableXtndIpSecDfBit This item controls whether the DF (don't fragment) bit of incoming packets is copied to the external IPSec header	Enumerationr/w Enumerated Values: 1 clear 2 copy 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.35
ifTableXtndMinPmtu Set the minimal PMTU for IPSec tunnels.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.36
ifTableXtndConfString An additional configuration string for the interface. init-string - for modem interfaces	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.37
ifTableXtndPppIpcpDnsOptionRequest PPP-IPCP DNS option request. Configuration whether during the PPP-IPCP negotiation the DNS option will be requested. Default: Disable. The DNS information gathered will be used by the DNS resolver to resolve hostnames.…	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.38
ifTableXtndKeepaliveTrackId Bind the status of this interface to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that interface is not bound to any object-tracker. A value …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.39
ifTableXtndFrTrafficShaping This object determines / indicates whether Frame-Relay Traffic-Shaping is enabled (on) or disabled (off) for this interface. This object can be set only for interfaces, but not for sub-interfaces. This object is applic…	OnOffr/w Type Values: 1 on 2 off 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.40
ifTableXtndType Extended type is, currently, required for modem interfaces	Enumerationr/w Enumerated Values: 1 nullModem 2 usrSporsterModem 3 multitechZbaModem 4 multitechIsdnModem 255 notSupported	.1.3.6.1.4.1.6889.2.1.6.2.2.1.1.41

The Extended Keepalive Parameters Table.

xtndKeepAliveEntry row .1.3.6.1.4.1.6889.2.1.6.2.2.2.1

This table contains the extended keepalive parameters.
The Table is per interface. Although for the first phase
it will be relevant for WAN Fast Ethernet Port. But may be
available in the future for interface.
…

Indexes

xtndKeepAliveifIndex

Column	Syntax	OID
xtndKeepAliveifIndex The index in the ifTable for which this row is providing information.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.1
xtndKeepAliveMethod The type of the extended keepalive. icmpPing(1),tcpConnect(2),httpGet(3) Default is IcmpPing.	Enumerationr/w Enumerated Values: 1 icmpPing 2 tcpConnect 3 httpGet	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.2
xtndKeepAliveTimeout Timeout in seconds to wait for a reply. Applicable to non-TCP tests such as ICMP Echo, UDP. Default 1second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.3
xtndKeepAliveUpRetries The number of successful extended keepalive necessary to determine that the next hop router is operational.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.4
xtndKeepAliveDownRetries The number of unsuccessful extedned keepalive necessary to determine that the next hop router is not operational.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.5
xtndKeepAliveInterval The extended keepliave interval in seconds	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.6
xtndKeepAliveSrcIPAddr The Source IP address to use. Default is the primary IP address of the interface. Setting the address 0.0.0.0 will reset the xtndKeepAliveSrcIPAddr to the primary IP interface address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.7
xtndKeepAliveIPAddr The IP address that it status shall be checked.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.8
xtndKeepAliveNextHopMAC The next Hop MAC, Valid for Ethernet Interfaces.	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.9
xtndKeepAliveStatus The Status of the extended KeepAlive. I.e. whether the current extended KeepAlive succeeded. 1 - up 2 - down 3 - disable	Enumeration Enumerated Values: 1 up 2 down 3 disable	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.10
xtndKeepAliveMode Extended KeepAlive Mode. 1 - enable 2 - disable	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6889.2.1.6.2.2.2.1.11

This table extends the standard frDlcmiTable, 
which models RFR I/Fs. Entries are created by 
the agent for Frame Relay I/Fs, and are 
deleted when those entries are deleted.

frDlcmiXtndEntry row .1.3.6.1.4.1.6889.2.1.6.2.4.1.1

Each Entry corresponds to a Frame Relay Interface.
Entries are created & deleted automatically by the
agent, when ifTableXtndEncapsulation of the underlying
Layer 1 Interface is changed.

Indexes

frDlcmiXtndIndex

Column	Syntax	OID
frDlcmiXtndIndex The ifIndex assigned to The Frame Relay interface is calculated by a known formula, which is agent-type specific.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.4.1.1.1
frDlcmiXtndLMIAutoSense Enable/disable automatic detection (By sending all supported keepalives) of the Local Management Interface (LMI) on the Frame Relay Interface.	OnOffr/w Type Values: 1 on 2 off 255 notRelevant	.1.3.6.1.4.1.6889.2.1.6.2.4.1.1.2

This table is used to create/associate/delete
A Virtual Channel (DLCI) with a specific Frame Relay 
Sub Interface. When an entry is created in this table:
          
If the DLCI is the same as that of a dynamic frCircuit
leraned on the Frame Relay Interface layered bellow
the Sub Interface specified by the entry then:
- The DLCI's status is changed to Static
Else - A new static DLCI is created.
          
In both cases, the static DLCI is assigned to the
specified Frame Relay Sub Interface.

frStaticCircuitEntry row .1.3.6.1.4.1.6889.2.1.6.2.4.2.1

An Entry represent a Virtual Channel available on a
specific Frame Relay Interface.

Indexes

frStaticCircuitSubIfIndex frStaticCircuitDLCI frStaticCircuitDLCIrole

Column	Syntax	OID
frStaticCircuitSubIfIndex Description.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.4.2.1.1
frStaticCircuitDLCI The virtual channel identifier.	FRAME-RELAY-DTE-MIBDLCI Type Constraints: range: 0..8388607	.1.3.6.1.4.1.6889.2.1.6.2.4.2.1.2
frStaticCircuitDLCIrole The role of the VC in this interface. primary - the state of this VC determines the operStatus of the interface. For point to point interfaces, the agent will not permit more than one prima…	Enumeration Enumerated Values: 1 priority6to7 2 priority4to5 3 priority2to3 4 priority0to1 100 primary	.1.3.6.1.4.1.6889.2.1.6.2.4.2.1.3
frStaticCircuitStatus Used to create/associate/delete a DLCI to a Sub FrameRelay Interface. Note that the frStaticCircuitDLCIrole defines limitations on creation and deletion of DLCIs. The notInService state will not be implemented.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.6.2.4.2.1.4
frStaticCircuitMapClass A pointer to a 'map-class frame-relay' entry applicable for this row. A 'map-class frame-relay' is an entry in the frMapClassTable. The value of this object must be identical to the value of the desired entry's frMapC…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.6889.2.1.6.2.4.2.1.5

A Frame Relay Sub Interface is the Layer 2 interface 
to which Layer 3 (IP) Interfaces are assigned.
This Logical Interface is hinted at but not modeled by
the RFC2115 Frame-Relay DTE MIB.
          
This table manages the creation/deletion of Frame 
Relay Sub I/Fs. Entries are created by the Creator 
of a sub-I/F.

frSubIfEntry row .1.3.6.1.4.1.6889.2.1.6.2.4.3.1

An Entry in this table defines a Frame Relay Sub
Interface of a specific type, defined over a
specific Frame Relay Interface.

Note that although the MIB model allow for two
SubFR I/Fs to have the same ifIn…

Indexes

frSubIfDlcmiIndex frSubIfSubIndex frSubIfType

Column	Syntax	OID
frSubIfDlcmiIndex The ifIndex of the Frame Relay Interface this Sub Interface is created over.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.4.3.1.1
frSubIfSubIndex The ifIndex of the Sub Interface. Note that the Mnagement station must select a sub interface number in the permissible range (which is agent-type dependent.) Agent Type ifIndex Range ========== ============= X…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6889.2.1.6.2.4.3.1.2
frSubIfType The Type of the Sub Interface. point2point - A Point to Point Interface. Point2multiPoint - Point to multi-point interface.	Enumeration Enumerated Values: 1 point2point 2 point2multiPoint	.1.3.6.1.4.1.6889.2.1.6.2.4.3.1.3
frSubIfStatus Creation/Deletion of a Frame Relay Sub Interface over a Frame Relay Interface. The Agent will refuse to delete a Sub Interface if there are IP Interfaces associated with it.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.6.2.4.3.1.4

This table contains the 'map-class frame-relay' entries
in the system. A 'map-class frame-relay' entry is a 
collection of QoS-related parameters that can be attached to 
a Frame-Relay DLCI.
          
An entry in this table can be attached to a DLCI by 
setting the value of frStaticCircuitMapClass in 
frStaticCircuitTable to the value of the frMapClassName 
of an entry in this table.
          
An entry in this table can be deleted only when
it is not pointed to by any entry in frStaticCircuitTable.
Trying to delete an entry that does not correspond to that
shall fail.
          
This table contains a default entry that can be modified, but
cannot be deleted. The value of frMapClassName for that entry
is 'default'.

frMapClassEntry row .1.3.6.1.4.1.6889.2.1.6.2.4.4.1

An entry in the table, which represents a 'frame-relay
map-class' object.

Indexes

frMapClassName

Column	Syntax	OID
frMapClassName The name of the map-class, which is also the only index component of this table. NOTE: This object can only contain a lower-case string! Trying to use upper-case characters on creation shall result in a failure.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.1
frMapClassBcOut The output Commited Burst size, in bits. Valid range is 300-39999999.	BitsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.2
frMapClassBeOut The output Excess Burst size, in bits. Valid range is 0-39999999.	BitsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.3
frMapClassCirOut The Committed Information Rate, in bits per second. Valid range is 1000-39999999.	Bits per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.4
frMapClassFrf12Frag Disable or enable FRF.12 fragmentation, and determine fragment size: The reserved value zero means FRF.12 fragmentation is disabled. A value larger then zero means FRF.12 fragmentation is enabled, and the fragment siz…	BytesInteger32r/w Constraints: range: 0-0 range: 16-1600	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.5
frMapClassRowStatus This object is used to create a new row or destroy an existing row in the manner described in the definition of the RowStatus textual convention. The value of this object has no effect on whether other ob…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.1.6.2.4.4.1.6

This table is used for configuring Dialer interfaces.

wanDialerEntry row .1.3.6.1.4.1.6889.2.1.6.2.5.1.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
wanDialerModemIf The ifIndex of the modem interface	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.1
wanDialerState The current state of the dialer finit-state-machine	Enumeration Enumerated Values: 1 initModem 2 idle 3 waiting4Modem 4 maxAttemptsDisabled 5 preDialReset 6 waitForConnect 7 waitForDCD 8 hangUp 9 persistentDelay 10 waitForIPCP 11 connected	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.2
wanDialerPersistentDelay The number of seconds between persistent dial attempts (zero= no persistent dialing)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.3
wanDialerPersistentMaxAttempts The interval between persistent (non-DDR) dial attempts. Zero means no persistent dialing	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.4
wanDialerPersistentReenable The time (in seconds) the dialer is disabled after it exhausts its consecutive dial attempts quota (wanDialerPersistentMaxAttempts). Zero means that the dialer is disabled until the dialing the current dial trigger di…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.5
wanDialerOrder The dial strings list usage order where: sequential(1) : The dialer starts from the beginning of the list when there is a new reason to dial (dial trigger. roundRobin(2): The dialer use the dialing stri…	Enumerationr/w Enumerated Values: 1 sequential 2 roundRobin 3 lastSuccessful	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.6
wanDialerString1 The 1st dial string in the list(NULL=unconfigured)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.7
wanDialerString2 The 2nd dial string in the list(NULL=unconfigured)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.8
wanDialerString3 The 3rd dial string in the list(NULL=unconfigured)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.9
wanDialerString4 The 4th dial string in the list(NULL=unconfigured)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.10
wanDialerString5 The 5th dial string in the list(NULL=unconfigured)	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.11
wanDialerLastDialed The last used display string	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.12
wanDialerWaitForIpcp The maximum time (in seconds) the dialer waits from dialing until PPP/IPCP is up.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.13
wanDialerPersistentInitial The minimum delay (in seconds) from boot to persitent dialing.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.1.6.2.5.1.1.14