VPLS-GENERIC-MIB Table View

This table specifies information for configuring
and monitoring Virtual Private LAN Service (VPLS).

vplsConfigEntry row .1.3.6.1.2.1.10.274.1.2.1

A row in this table represents a Virtual Private LAN
Service (VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row is created via SNMP or by the agent…

Indexes

vplsConfigIndex

Column	Syntax	OID
vplsConfigIndex Unique index for the conceptual row identifying a VPLS service.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.274.1.2.1.1
vplsConfigName A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.274.1.2.1.2
vplsConfigDescr A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.274.1.2.1.3
vplsConfigAdminStatus The desired administrative state of the VPLS service. If the administrative status of the VPLS service is changed to enabled, then this service is able to utilize pseudowires to perform the tasks of a VP…	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.2.1.10.274.1.2.1.4
vplsConfigMacLearning This object specifies if MAC Learning is enabled in this service. If this object is true then MAC Learning is enabled. If false, then MAC Learning is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.274.1.2.1.6
vplsConfigDiscardUnknownDest If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.274.1.2.1.7
vplsConfigMacAging If the value of this object is 'true', then the MAC aging process is enabled in this VPLS. If 'false', then the MAC aging process is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.274.1.2.1.8
vplsConfigFwdFullHighWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmRaised notification will be sent. The value of this object must be higher than vplsConfigFwdFullLowWa…	percentageUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.2.1.10.274.1.2.1.10
vplsConfigFwdFullLowWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the vplsFwdFullAlarmCleared notification will be sent. The value of this object must be less than vplsConfigFwdFullHighWa…	percentageUnsigned32r/w Constraints: range: 0-99	.1.3.6.1.2.1.10.274.1.2.1.11
vplsConfigRowStatus For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of the read-create objects in the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.274.1.2.1.12
vplsConfigMtu The value of this object specifies the MTU of this VPLS instance. This can be used to limit the MTU to a value lower than the MTU supported by the associated pseudowires.	Unsigned32r/w Constraints: range: 64-9192	.1.3.6.1.2.1.10.274.1.2.1.13
vplsConfigVpnId This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service.	VPN-TC-STD-MIBVPNIdOrZeror/w Type Constraints: range: 0 range: 7	.1.3.6.1.2.1.10.274.1.2.1.14
vplsConfigStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.274.1.2.1.15
vplsConfigSignalingType Desired signaling type of the VPLS service. If the value of this object is ldp(1), then a corresponding entry in vplsLdpConfigTable is required. If the value of this object is bgp(2), then …	Enumerationr/w Enumerated Values: 1 ldp 2 bgp 3 none	.1.3.6.1.2.1.10.274.1.2.1.16

This table provides information for monitoring
Virtual Private LAN Service (VPLS).

vplsStatusEntry row .1.3.6.1.2.1.10.274.1.3.1

A row in this table represents a Virtual Private LAN
Service (VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically crea…

Indexes

No indexes recorded

Column	Syntax	OID
vplsStatusOperStatus The current operational state of this VPLS service.	Enumeration Enumerated Values: 0 other 1 up 2 down	.1.3.6.1.2.1.10.274.1.3.1.1
vplsStatusPeerCount This objects specifies the number of peers (pseudowires) present in this VPLS instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.274.1.3.1.2

This table provides an association between a
VPLS service and the corresponding pseudowires.
A service can have more than one pseudowire
association.  Pseudowires are defined in
the pwTable

vplsPwBindEntry row .1.3.6.1.2.1.10.274.1.4.1

Each row represents an association between a
VPLS instance and a pseudowire
defined in the pwTable. Each index is unique
in describing an entry in this table. However,
both indexes are required to define the one
to ma…

Indexes

vplsConfigIndex PW-STD-MIBpwIndex

Column	Syntax	OID
vplsPwBindConfigType The value of this object indicates whether the pseudowire Binding was created via SNMP/Console or via Auto-Discovery. The value of this object must be specified when the row is created and cannot be chang…	Enumerationr/w Enumerated Values: 1 manual 2 autodiscovery	.1.3.6.1.2.1.10.274.1.4.1.1
vplsPwBindType The value of this object indicates whether the pseudowire Binding is of type mesh or spoke. The value of this object must be specified when the row is created and cannot be changed while the row status is…	Enumerationr/w Enumerated Values: 1 mesh 2 spoke	.1.3.6.1.2.1.10.274.1.4.1.2
vplsPwBindRowStatus For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of the read-create …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.274.1.4.1.3
vplsPwBindStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.274.1.4.1.4

This table specifies information for configuring
BGP Auto-Discovery parameters for a given VPLS service.

vplsBgpADConfigEntry row .1.3.6.1.2.1.10.274.1.5.1

A row in this table indicates that BGP based Auto-
Discovery is in use for this instance of VPLS.
A row in this table is indexed by vplsConfigIndex, which
uniquely identifies a single VPLS.

Entries in this …

Indexes

vplsConfigIndex

Column	Syntax	OID
vplsBgpADConfigRouteDistinguisher The route distinguisher for this VPLS. See RFC 4364 for a complete definition of a route distinguisher. For more details on use of a route distinguisher for a VPLS service, see RFC 4761. When not configured, the value…	VplsBgpRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.2.1.10.274.1.5.1.1
vplsBgpADConfigPrefix In case of auto-discovery, the default prefix advertised is the IP address of the loopback. In case the user wants to override the loopback address, vplsBgpADConfigPrefix should be set. When this value is non-zero, th…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.274.1.5.1.2
vplsBgpADConfigVplsId VplsId is a unique identifier for all Virtual Switch Instances (VSIs) belonging to the same VPLS. It is advertised as an extended community.	VplsBgpRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.2.1.10.274.1.5.1.3
vplsBgpADConfigRowStatus For creating, modifying, and deleting this row. All other objects in this row must be set to valid values before this object can be set to active(1). None of the read-create objects in the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.274.1.5.1.4
vplsBgpADConfigStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.274.1.5.1.5

This table specifies the list of Route Targets
imported or exported by BGP during
auto-discovery of VPLS.

vplsBgpRteTargetEntry row .1.3.6.1.2.1.10.274.1.6.1

An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value

of vplsBgpRteTargetType, a Route Target might be
exported, imported, or both. Every VPLS that
uses …

Indexes

vplsConfigIndex vplsBgpRteTargetIndex

Column	Syntax	OID
vplsBgpRteTargetIndex This index, along with vplsConfigIndex, identifies one entry in the vplsBgpRteTargetTable. By keeping vplsConfigIndex constant and using a new value of vplsBgpRteTargetIndex, users can configure multiple Route Targets …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.274.1.6.1.1
vplsBgpRteTargetRTType Used to define the type of a Route Target usage. Route Targets can be specified to be imported, exported, or both. For a complete definition of a Route Target, see RFC 4364.	VplsBgpRouteTargetTyper/w Type Values: 1 import 2 export 3 both	.1.3.6.1.2.1.10.274.1.6.1.2
vplsBgpRteTargetRT The Route Target associated with the VPLS service. For more details on use of Route Targets for a VPLS service, see RFC 4761.	VplsBgpRouteTargetr/w Type Constraints: range: 0..256	.1.3.6.1.2.1.10.274.1.6.1.3
vplsBgpRteTargetRowStatus This variable is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values before this object can be set to active(1). When a row …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.274.1.6.1.4
vplsBgpRteTargetStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.274.1.6.1.5