VPLS-GENERIC-MIB

        Copyright (c) 2014 IETF Trust and the persons
identified as authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
        
The initial version of this MIB module was published in
RFC 7257; for full legal notices see the RFC itself.
        
This MIB module contains generic managed object definitions
for Virtual Private LAN Service as defined in RFC 4761 and
RFC 4762.
        
This MIB module enables the use of any underlying pseudowire
network.
    
Source file
VPLS-GENERIC-MIB
Last revised
Identity
vplsGenericMIB
Base OID
1.3.6.1.2.1.10.274
Imported Objects
PW-STD-MIB pwIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue
VPN-TC-STD-MIB VPNIdOrZero
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'VPLS-GENERIC-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'VPLS-GENERIC-MIB::vplsGenericMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VPLS-GENERIC-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VPLS-GENERIC-MIB::vplsGenericMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (49)
.1.3.6.1.2.1.10.274
.1.3.6.1.2.1.10.274.0
.1.3.6.1.2.1.10.274.1
.1.3.6.1.2.1.10.274.1.1
.1.3.6.1.2.1.10.274.1.2
.1.3.6.1.2.1.10.274.1.2.1
Unsigned32
.1.3.6.1.2.1.10.274.1.2.1.1
percentageUnsigned32
.1.3.6.1.2.1.10.274.1.2.1.10
percentageUnsigned32
.1.3.6.1.2.1.10.274.1.2.1.11
.1.3.6.1.2.1.10.274.1.2.1.12
Unsigned32
.1.3.6.1.2.1.10.274.1.2.1.13
.1.3.6.1.2.1.10.274.1.2.1.14
.1.3.6.1.2.1.10.274.1.2.1.15
Enumeration
.1.3.6.1.2.1.10.274.1.2.1.16
.1.3.6.1.2.1.10.274.1.2.1.2
.1.3.6.1.2.1.10.274.1.2.1.3
Enumeration
.1.3.6.1.2.1.10.274.1.2.1.4
.1.3.6.1.2.1.10.274.1.2.1.6
.1.3.6.1.2.1.10.274.1.2.1.7
.1.3.6.1.2.1.10.274.1.2.1.8
.1.3.6.1.2.1.10.274.1.3
.1.3.6.1.2.1.10.274.1.3.1
Enumeration
.1.3.6.1.2.1.10.274.1.3.1.1
.1.3.6.1.2.1.10.274.1.3.1.2
.1.3.6.1.2.1.10.274.1.4
.1.3.6.1.2.1.10.274.1.4.1
Enumeration
.1.3.6.1.2.1.10.274.1.4.1.1
Enumeration
.1.3.6.1.2.1.10.274.1.4.1.2
.1.3.6.1.2.1.10.274.1.4.1.3
.1.3.6.1.2.1.10.274.1.4.1.4
.1.3.6.1.2.1.10.274.1.5
.1.3.6.1.2.1.10.274.1.5.1
.1.3.6.1.2.1.10.274.1.5.1.1
.1.3.6.1.2.1.10.274.1.5.1.2
.1.3.6.1.2.1.10.274.1.5.1.3
.1.3.6.1.2.1.10.274.1.5.1.4
.1.3.6.1.2.1.10.274.1.5.1.5
.1.3.6.1.2.1.10.274.1.6
.1.3.6.1.2.1.10.274.1.6.1
.1.3.6.1.2.1.10.274.1.6.1.1
.1.3.6.1.2.1.10.274.1.6.1.2
.1.3.6.1.2.1.10.274.1.6.1.3
.1.3.6.1.2.1.10.274.1.6.1.4
.1.3.6.1.2.1.10.274.1.6.1.5
.1.3.6.1.2.1.10.274.1.7
.1.3.6.1.2.1.10.274.1.8
.1.3.6.1.2.1.10.274.2
.1.3.6.1.2.1.10.274.2.1
.1.3.6.1.2.1.10.274.2.2
Dependencies (14) 6 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (3)
OctetString range: 0..256
OctetString range: 0..256
Enumeration
import(1)
export(2)
both(3)
Compliance Statements (2)

OID .1.3.6.1.2.1.10.274.2.1.1
Compliance requirement for implementations that
provide full support for VPLS-GENERIC-MIB.
Such devices can then be monitored and configured using
this MIB module.
Required groups

OID .1.3.6.1.2.1.10.274.2.1.2
Compliance requirement for implementations that only
provide read-only support for VPLS-GENERIC-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
Object refinements
ObjectAccessSyntaxDescription
vplsConfigName readonly
Write access is not required.
vplsConfigDescr readonly
Write access is not required.
vplsConfigAdminStatus readonly
Write access is not required.
vplsConfigMacLearning readonly
Write access is not required.
vplsConfigDiscardUnknownDest readonly
Write access is not required.
vplsConfigMacAging readonly
Write access is not required.
vplsConfigFwdFullHighWatermark readonly
Write access is not required.
vplsConfigFwdFullLowWatermark readonly
Write access is not required.
vplsConfigRowStatus readonly
Write access is not required.
vplsConfigMtu readonly
Write access is not required.
vplsPwBindConfigType readonly
Write access is not required.
vplsPwBindType readonly
Write access is not required.
vplsPwBindRowStatus readonly
Write access is not required.
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.2.1.10.274.0.1
The vplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service.

The object instances included in the notification
are the ones associated with the VPLS service
whose status has changed.
.1.3.6.1.2.1.10.274.0.2
The vplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
vplsConfigFwdFullHighWatermark.

The object instances included in the notification
are the ones associated with the VPLS service
that has exceeded the threshold.
.1.3.6.1.2.1.10.274.0.3
The vplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
vplsConfigFwdFullLowWatermark.

The object instances included in the notification
are the ones associated with the VPLS service
that has fallen below the threshold.