TN-SAS-PORT-MIB Table View

This table has additional information about the 7210 platforms

tnSASPortExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.2.1

Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its supported …

Indexes

No indexes recorded

Column	Syntax	OID
tnPortUplinkMode If the tnPortUplinkMode is set to true when the tnPortMode is set to 'access(1)' and the port acts as an uplink. tnPortEncaptype must also be configured 'qinqEncap' when using access port as uplink port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.2.1.1
tnPortAccessEgressQoSPolicyId Qos Policy ID for Access Egress Port	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.7.2.2.2.2.2.1.2
tnPortNetworkQoSPolicyId Port Network Policy ID	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.7.2.2.2.2.2.1.3
tnPortShgGroupName Split horizon group to be attached to this port	TN-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.7483.7.2.2.2.2.2.1.4

Defines the Nokia SAS series network port ingress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical Meters
being used for the ports to forward the network ingress
traffic.

tnSASPortNetIngressStatsEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.3.1

Defines an entry in tnSASPortNetIngressStatsTable. Entries are
created and deleted by the system depending on the meter policy
being used at the specific port.

Indexes

TN-PORT-MIBtnPortPortID tnSASPortNetIngressMeterIndex

Column	Syntax	OID
tnSASPortNetIngressMeterIndex tnSASPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed system.	TN-TC-MIBTNetworkIngressMeterId Type Constraints: range: 0..16	.1.3.6.1.4.1.7483.7.2.2.2.2.3.1.1
tnSASPortNetIngressFwdInProfPkts tnSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.3.1.2
tnSASPortNetIngressFwdOutProfPkts tnSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.3.1.3
tnSASPortNetIngressFwdInProfOcts tnSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.3.1.4
tnSASPortNetIngressFwdOutProfOcts tnSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.3.1.5

This table has additional information about the 7210 platforms

tnSASPortEtherExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.4.1

Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM cardEntry
can be deleted from the tmnxMDATable, its sup…

Indexes

No indexes recorded

Column	Syntax	OID
tnPortEtherEgressMaxBurst Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.	Integer32r/w Constraints: range: -1--1 range: 32-32767	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.1
tnPortStatsQueue1PktsFwd If tnPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.2
tnPortStatsQueue2PktsFwd If tnPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.3
tnPortStatsQueue3PktsFwd If tnPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.4
tnPortStatsQueue4PktsFwd If tnPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.5
tnPortStatsQueue5PktsFwd If tnPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.6
tnPortStatsQueue6PktsFwd If tnPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.7
tnPortStatsQueue7PktsFwd If tnPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.8
tnPortStatsQueue8PktsFwd If tnPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.9
tnPortEtherEgrSchedMode tnPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue to schedule. In 'sap-based' mode the sch…	Enumerationr/w Enumerated Values: 1 fc-based 2 sap-based	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.10
tnPortEtherLoopback If tnPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback	Enumerationr/w Enumerated Values: 0 none 2 internal	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.11
tnPortEtherIpMTU tnPortEtherIpMTU is the IP MTU for interfaces using this port	bytesUnsigned32r/w Constraints: range: 0-0 range: 512-9000	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.12
tnPortEtherClockConfig When the value of tnPortEtherClockConfig is 'automatic' the Ethernet interface will automatically negotiate clock mastership along with other link parameters with the far end. Depending upon the capabilities of the two …	Enumerationr/w Enumerated Values: 0 notApplicable 1 automatic 2 manual-master 3 manual-slave	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.13
tnPortLoopbckServId Loopback Service Id	TN-TC-MIBTmnxServIdr/w Type Constraints: range: 0..2147483650	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.14
tnPortLoopbckSapPortId Loopback Sap Port Id 0 indicates the port is undefined.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.15
tnPortLoopbckSapEncapVal Loopback Sap Encapsulation	TN-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.16
tnPortLoopbckSrcMacAddr Loopback Source Mac Address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.17
tnPortLoopbckDstMacAddr Loopback Destination Mac Address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.18
tnPortAccEgrSapQosMarking Port Ethernet Access Egress Sap Qos Marking	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.19
tnPortLldpTnlNrstBrdgeDstMac If tnPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.20
tnPortPtpEnable 1588v2 PTP enabled on port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.21
tnPortSapEtherLLFAdminStatus tnPortSapEtherLLFAdminStatus specifies whether or not Link-Loss Forwarding has been enabled 'up' or disabled 'down' on a SAP that is associated to this port. If a SAP has not been associated to this port, 'notApplicabl…	Enumeration Enumerated Values: 0 notApplicable 1 up 2 down	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.22
tnPortSapEtherLLFOperStatus tnPortSapEtherLLFOperStatus indicates whether or not a SAP that is associated to the port is operationally 'down'. If a SAP has not been associated to the port, 'notApplicable' is specified. See tnSapEth…	Enumeration Enumerated Values: 0 notApplicable 1 fault 2 clear	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.23
tnPortSapEtherLLFId tnPortSapEtherLLFId specifies the identifier between sending and receiving objects that are LLF enabled on a SAP that is associated to this port. See tnSapEthernetInfoTable for provisioning details.	Unsigned32 Constraints: range: 0-5	.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.24

A table that contains port split-horizon group
information.

tnPortShgInfoEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.6.1

Split-horizon group information about a TLS service.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnPortShgName

Column	Syntax	OID
tnPortShgName The value of the object tnPortShgName specifies the name of the split-horizon group.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.7483.7.2.2.2.2.6.1.1
tnPortShgRowStatus The value of the object tnPortShgRowStatus specifies the status of this row. The only values supported during a set operation are createAndGo(4) and destroy(6). To delete an entry from this table, there should be no po…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.7.2.2.2.2.6.1.2
tnPortShgInstanceId The value of the object tnPortShgInstanceId indicates the instance identifier for the split horizon group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.7.2.2.2.2.6.1.3
tnPortShgDescription The value of the object tnPortShgDescription specifies generic information about this split-horizon group.	TN-TC-MIBServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.7483.7.2.2.2.2.6.1.4
tnPortShgLastMgmtChange The value of the object tnPortShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.7.2.2.2.2.6.1.5

Defines the Nokia SAS series network port egress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network egress
traffic.

tnPortNetEgressQueueStatsEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.8.1

Defines an entry in tnPortNetEgressQueueStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.

Indexes

TN-PORT-MIBtnPortPortID tnPortNetEgressQueueStatsIndex

Column	Syntax	OID
tnPortNetEgressQueueStatsIndex tnPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.1
tnPortNetEgressQueueStatsFwdPkts tnPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.2
tnPortNetEgressQueueStatsFwdOcts tnPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.3
tnPortNetEgressQueueStatsDroPkts tnPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.4
tnPortNetEgressQueueStatsDroOcts tnPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.5
tnPortNetEgressQueueStatsInProfDroPkts tnPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.6
tnPortNetEgressQueueStatsInProfDroOcts tnPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.7
tnPortNetEgressQueueStatsOutProfDroPkts tnPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.8
tnPortNetEgressQueueStatsOutProfDroOcts tnPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.9
tnPortNetEgressQueueOperPIR The operational PIR rate.		.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.10
tnPortNetEgressQueueOperCIR The operational CIR rate.		.1.3.6.1.4.1.7483.7.2.2.2.2.8.1.11

The port table has an entry for each virtual port

tnVirtualPortEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.15.1

Each row entry represents a virtual port

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnVirtualPortPortID

Column	Syntax	OID
tnVirtualPortPortID tnVirtualPortPortID is an index into this table	TN-TC-MIBTmnxPortID	.1.3.6.1.4.1.7483.7.2.2.2.2.15.1.1
tnVirtualPortInUse tnVirtualPortInUse describes whether the virtual port is used by an application or not.	Enumeration Enumerated Values: 1 not-in-use 2 mirror 3 macswap 4 testhead	.1.3.6.1.4.1.7483.7.2.2.2.2.15.1.2
tnVirtualPortSpeed tnVirtualPortSpeed describes the speed of the virtual ports.	Enumeration Enumerated Values: 1 one-gig 2 ten-gig	.1.3.6.1.4.1.7483.7.2.2.2.2.15.1.3

This table contains additional objects for the interface
table (ifTable) required for the management of packet cards
in PSS.

tnSASPssIfEntry row .1.3.6.1.4.1.7483.7.2.2.2.2.50.1

An entry containing additional management information
applicable to PSS packet cards.

Indexes

No indexes recorded

Column	Syntax	OID
ifStatsUpdateTimeStamp A timestamp value to indicate the last update to the statistics in the interface table. This can be used for accurate delta calculations of periodic readings of the statistics. The timestamp is in millisecond units	millisecondsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.7.2.2.2.2.50.1.1