tnPortEtherLoopback
TN-SAS-PORT-MIB ·
.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.11
Object
column
r/w
Enumeration
If tnPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback
Context
- MIB
- TN-SAS-PORT-MIB
- OID
.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnSASPortEtherExtnEntry
- Table
- tnSASPortEtherExtnTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
2 | internal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPortEtherEgressMaxBurst Controls the amount of burst the egress port can generate.
Its configured in terms of Kilo bits.Its an optional parameter.
And cannot be used without egress-rate being set. | column | Integer32 | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.1 |
| tnPortEtherEgrSchedMode tnPortEtherEgrSchedMode sets the SAP egress scheduler mode. In
'fc-based' mode the prority of all the egress queues across all the
SAPs are considered to determine the next queue … | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.10 |
| tnPortEtherIpMTU tnPortEtherIpMTU is the IP MTU for interfaces using this
port | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.12 |
| tnPortEtherClockConfig When the value of tnPortEtherClockConfig is 'automatic' the
Ethernet interface will automatically negotiate clock mastership
along with other link parameters with the far end. Dep… | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.13 |
| tnPortLoopbckServId Loopback Service Id | column | TN-TC-MIBTmnxServId | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.14 |
| tnPortLoopbckSapPortId Loopback Sap Port Id
0 indicates the port is undefined. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.15 |
| tnPortLoopbckSapEncapVal Loopback Sap Encapsulation | column | TN-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.16 |
| tnPortLoopbckSrcMacAddr Loopback Source Mac Address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.17 |
| tnPortLoopbckDstMacAddr Loopback Destination Mac Address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.18 |
| tnPortAccEgrSapQosMarking Port Ethernet Access Egress Sap Qos Marking | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.19 |
| tnPortStatsQueue1PktsFwd If tnPortStatsQueue1PktsFwd is set to 'true', count the egress
packets with forwarding class value '0'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.2 |
| tnPortLldpTnlNrstBrdgeDstMac If tnPortLldpTnlNrstBrdgeDstMac is set to 'true'
and admin status is disabled lldp pkts will be
tunnelled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.20 |
| tnPortPtpEnable 1588v2 PTP enabled on port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.21 |
| tnPortSapEtherLLFAdminStatus tnPortSapEtherLLFAdminStatus specifies whether or not Link-Loss
Forwarding has been enabled 'up' or disabled 'down' on a SAP
that is associated to this port. If a SAP has not bee… | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.22 |
| tnPortSapEtherLLFOperStatus tnPortSapEtherLLFOperStatus indicates whether or not a SAP that is
associated to the port is operationally 'down'. If a SAP has not been
associated to the port, 'notApplicable' i… | column | Enumeration | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.23 |
| tnPortSapEtherLLFId tnPortSapEtherLLFId specifies the identifier between sending
and receiving objects that are LLF enabled on a SAP that is
associated to this port.
See tnSapEthernetI… | column | Unsigned32 | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.24 |
| tnPortStatsQueue2PktsFwd If tnPortStatsQueue2PktsFwd is set to 'true', count the egress
packets with forwarding class value '1'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.3 |
| tnPortStatsQueue3PktsFwd If tnPortStatsQueue3PktsFwd is set to 'true', count the egress
packets with forwarding class value '2'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.4 |
| tnPortStatsQueue4PktsFwd If tnPortStatsQueue4PktsFwd is set to 'true', count the egress
packets with forwarding class value '3'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.5 |
| tnPortStatsQueue5PktsFwd If tnPortStatsQueue5PktsFwd is set to 'true', count the egress
packets with forwarding class value '5'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.6 |
| tnPortStatsQueue6PktsFwd If tnPortStatsQueue6PktsFwd is set to 'true', count the egress
packets with forwarding class value '6'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.7 |
| tnPortStatsQueue7PktsFwd If tnPortStatsQueue7PktsFwd is set to 'true', count the egress
packets with forwarding class value '7'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.8 |
| tnPortStatsQueue8PktsFwd If tnPortStatsQueue8PktsFwd is set to 'true', count the egress
packets with forwarding class value '8'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.9 |