tnPortEtherClockConfig

TN-SAS-PORT-MIB · .1.3.6.1.4.1.7483.7.2.2.2.2.4.1.13
MIB view Table view

Object

column r/w Enumeration 
When the value of tnPortEtherClockConfig is 'automatic' the
Ethernet interface will automatically negotiate clock mastership
along with other link parameters with the far end. Depending
upon the capabilities of the two ends, one will be master the
other will be slave for clocking.
When the value of tnPortEtherClockConfig is 'manual-master', the
Ethernet interface will negotiate other link parameters with the
far end except clock mastership. It assumes clock mastership and want
the other end to be slave.
When the value is 'manual-slave' this ethernet interface chooses to
be slave and wants the far end to assume clock mastership.
For 10 baseT and 100 baseT ethernet interfaces, value of this
variable should be 'none', as this will not be applicable
for those interfaces.

Context

MIB
TN-SAS-PORT-MIB
OID
.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.13
Type
column
Access
readwrite
Status
current
Parent
tnSASPortEtherExtnEntry
Table
tnSASPortEtherExtnTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
0notApplicable
1automatic
2manual-master
3manual-slave

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnPortEtherEgressMaxBurst
Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
columnInteger32.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.1
tnPortEtherEgrSchedMode
tnPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue …
columnEnumeration.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.10
tnPortEtherLoopback
If tnPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback
columnEnumeration.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.11
tnPortEtherIpMTU
tnPortEtherIpMTU is the IP MTU for interfaces using this port
columnbytes Unsigned32.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.12
tnPortLoopbckServId
Loopback Service Id
columnTN-TC-MIBTmnxServId.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.14
tnPortLoopbckSapPortId
Loopback Sap Port Id 0 indicates the port is undefined.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.15
tnPortLoopbckSapEncapVal
Loopback Sap Encapsulation
columnTN-TC-MIBTmnxEncapVal.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.16
tnPortLoopbckSrcMacAddr
Loopback Source Mac Address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.17
tnPortLoopbckDstMacAddr
Loopback Destination Mac Address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.18
tnPortAccEgrSapQosMarking
Port Ethernet Access Egress Sap Qos Marking
columnEnumeration.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.19
tnPortStatsQueue1PktsFwd
If tnPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.2
tnPortLldpTnlNrstBrdgeDstMac
If tnPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.20
tnPortPtpEnable
1588v2 PTP enabled on port
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.21
tnPortSapEtherLLFAdminStatus
tnPortSapEtherLLFAdminStatus specifies whether or not Link-Loss Forwarding has been enabled 'up' or disabled 'down' on a SAP that is associated to this port. If a SAP has not bee…
columnEnumeration.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.22
tnPortSapEtherLLFOperStatus
tnPortSapEtherLLFOperStatus indicates whether or not a SAP that is associated to the port is operationally 'down'. If a SAP has not been associated to the port, 'notApplicable' i…
columnEnumeration.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.23
tnPortSapEtherLLFId
tnPortSapEtherLLFId specifies the identifier between sending and receiving objects that are LLF enabled on a SAP that is associated to this port. See tnSapEthernetI…
columnUnsigned32.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.24
tnPortStatsQueue2PktsFwd
If tnPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.3
tnPortStatsQueue3PktsFwd
If tnPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.4
tnPortStatsQueue4PktsFwd
If tnPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.5
tnPortStatsQueue5PktsFwd
If tnPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.6
tnPortStatsQueue6PktsFwd
If tnPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.7
tnPortStatsQueue7PktsFwd
If tnPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.8
tnPortStatsQueue8PktsFwd
If tnPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.7483.7.2.2.2.2.4.1.9