TIMETRA-OTU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

103

tmnxOtuIfTable

table

.1.3.6.1.4.1.6527.3.1.2.62.1.1 · 1 row entry · 40 columns

Open in standard view

Uses the nokia variant from /opt/observium/mibs/nokia.

Command help

Walk tmnxOtuIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OTU-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OTU-MIB::tmnxOtuIfTable'

The tmnxOtuIfTable consists of the interfaces using OTU encapsulation.

tmnxOtuIfEntry row .1.3.6.1.4.1.6527.3.1.2.62.1.1.1

The tmnxOtuIfEntry contains information pertaining to an individual
OTU encapsulated physical interface.

Rows in this table are created and destroyed using the
tmnxOtuIfRowStatus object.

Indexes

IF-MIBifIndex

Column Syntax OID

tmnxOtuIfRowStatus

The tmnxOtuIfRowStatus controls the creation and deletion of row
entries in the tmnxOtuIfTable.

Creating a row in the tmnxOtuIfTable using 'createAndGo (4)' enables
OTU encapsulation for the interface. De…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.1

tmnxOtuIfTimeStamp

The tmnxOtuIfTimeStamp indicates the time, since system startup, of
the last change to this row.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.2

tmnxOtuIfFecMode

The tmnxOtuIfFecMode specifies the OTU encapsulation used by this
interface.

TmnxOtuFecModer/w

Type Values:

0	disabled
1	g709fec
2	enhanced

Description:

The TmnxOtuFecMode specifies what type of Forward Error Correction
(FEC) has been enabled on the port. The valid types are as follows:

- disabled - OTU encap enabled with no FEC.
- g709fec…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.3

tmnxOtuIfSfSdMethod

The tmnxOtuIfSfSdMethod specifies the method on which to detect Signal
Failure and Signal Degradation.

tmnxOtuIfBerSfThreshold and tmnxOtuIfBerSdThreshold are only
applicable when tmnxOtuIfSfSdMethod is b…

TmnxOtuSFSDMethodr/w

Type Values:

1	fec
2	bip8

Description:

The TmnxOtuSFSDMethod specifies the method to determine the Signal
Failure (SF) and Signal Degradation (SD) of the interface. The valid
methods are as follows:

- fec - FEC correctable bit er…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.4

tmnxOtuIfBerSfThreshold

The value of tmnxOtuIfBerSfThreshold specifies the bit error rate
(BER) threshold used to determine when to raise and clear
otuBerSf/fecSf alarms.

Bit error computed must reach/exceed the threshold value …

error bits in 1/10e-n bits receivedUnsigned32r/w

Constraints:
range: 3-6

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.5

tmnxOtuIfBerSdThreshold

The value of tmnxOtuIfBerSdThreshold specifies the bit error rate
(BER) threshold used to determine when to raise and clear
otuBerSd/fecSd alarms.

Bit error computed must reach/exceed the threshold value …

error bits in 1/10^n bits receivedUnsigned32r/w

Constraints:
range: 5-9

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.6

tmnxOtuIfOtuOperDataRate

The tmnxOtuIfOtuOperDataRate indicates the rate at which the OTU data
is transmitted on the line.

megabpsSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.7

tmnxOtuIfOtu2LanDataRate

The value of tmnxOtuIfOtu2LanDataRate specifies the rate at which data
is transmitted on the line. An interface that does not support OTU2
encapsulation will default, and be restricted to, the value of
'notApplicable (0…

gigabpsTmnxOtu2LanDataRater/w

Type Values:

0	notApplicable
1	dr11049
2	dr11096

Description:

The TmnxOtu2LanDataRate specifies the allowable data rates for a given
OTU2 10GE-LAN enabled interface. The valid data rates are as follows:

- notApplicable - not an OTU 10GE enabled interface.
…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.8

tmnxOtuIfCfgAlarms

The value of tmnxOtuIfCfgAlarms specifies the alarms that are to be
monitored by the OTU interface. If an alarm bit is set, then the
corresponding alarm will raise/clear an alarm when its state changes.
An unset bit spe…

TmnxOtuAlarmsr/w

Type Values:

0	loc
1	los
2	lof
3	lom
4	otuAis
5	otuBerSf
6	otuBerSd
7	otuBdi
8	otuTim
9	otuIae
10	otuBiae
11	fecSf
12	fecSd
13	fecFail
14	fecUncorr
15	oduAis
16	oduOci
17	oduLck
18	oduBdi
19	oduTim
20	reserved20
21	opuPlm

Description:

The TmnxOtuAlarms specifies the alarms which are enabled or
outstanding against an OTU enabled interface. The valid alarms are as
follows:

- loc - Loss of Clock.
- los - Lo…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.9

tmnxOtuIfAlarmState

The value of tmnxOtuIfAlarmState indicates which monitored alarms are
raised against the OTU interface.

TmnxOtuAlarms

Type Values:

0	loc
1	los
2	lof
3	lom
4	otuAis
5	otuBerSf
6	otuBerSd
7	otuBdi
8	otuTim
9	otuIae
10	otuBiae
11	fecSf
12	fecSd
13	fecFail
14	fecUncorr
15	oduAis
16	oduOci
17	oduLck
18	oduBdi
19	oduTim
20	reserved20
21	opuPlm

Description:

The TmnxOtuAlarms specifies the alarms which are enabled or
outstanding against an OTU enabled interface. The valid alarms are as
follows:

- loc - Loss of Clock.
- los - Lo…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.10

tmnxOtuIfHoldTimeUpobsolete

The value of tmnxOtuIfHoldTimeUp is used to configure the hold-timer
for link up event dampening. This guards against reporting excessive
interface transitions. This is implemented by not advertising
subsequent transiti…

decisecondsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.11

tmnxOtuIfHoldTimeDownobsolete

The value of tmnxOtuIfHoldTimeDown is used to configure the hold-timer
for link down event dampening. This guards against reporting excessive
interface transitions. This is implemented by not advertising
subsequent tran…

decisecondsUnsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.12

tmnxOtuIfSmTtiTxMode

The value of tmnxOtuIfSmTtiTxMode specifies the type of Trail Trace
Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead.

Specifying a tmnxOtuIfSmTtiTxMode value of 'auto (0)' along with
t…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.13

tmnxOtuIfSmTtiTx

The value of tmnxOtuIfSmTtiTx specifies the Trail Trace Identifier
(TTI) for the Section Monitoring (SM) in the OTU overhead. This
identifier can be a string or a non-printable sequence of bytes.

Specifyi…

TmnxOtuTtiStringr/w

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.14

tmnxOtuIfSmTtiRx

The value of tmnxOtuIfSmTtiRx indicates the Trail Trace Identifier
(TTI) for the Section Monitoring (SM) in the received OTU overhead.

TmnxOtuTtiString

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.15

tmnxOtuIfSmTtiExpMode

The value of tmnxOtuIfSmTtiExpMode specifies the type of expected
Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the
OTU overhead.

Specifying a tmnxOtuIfSmTtiExpMode value of 'auto (0)' a…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.16

tmnxOtuIfSmTtiExpCopyRx

tmnxOtuIfSmTtiExpCopyRx is used to copy the contents of
tmnxOtuIfSmTtiRx into tmnxOtuIfSmTtiExp.

TIMETRA-TC-MIBTmnxActionTyper/w

Type Values:

1	doAction
2	notApplicable

Description:

The TmnxActionType data type is an enumerated integer
that describes the values used to support action or
operation style commands. Setting a variable of this
type to 'doAction' causes the action to occur. GETs and
GE…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.17

tmnxOtuIfSmTtiExp

The value of tmnxOtuIfSmTtiExp specifies the Trail Trace Identifier
(TTI) for the Section Monitoring (SM) that is expected to be received
in the OTU overhead.

A mismatch of the received and the expected S…

TmnxOtuTtiStringr/w

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.18

tmnxOtuIfPmTtiTxMode

The value of tmnxOtuIfPmTtiTxMode specifies the type of Trail Trace
Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead.

Specifying a tmnxOtuIfPmTtiTxMode value of 'auto (0)' along with
tmnx…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.19

tmnxOtuIfPmTtiTx

The value of tmnxOtuIfPmTtiTx specifies the Trail Trace Identifier
(TTI) for the Path Monitoring (PM) in the OTU overhead. This
identifier can be a string or a non-printable sequence of bytes.

Specifying …

TmnxOtuTtiStringr/w

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.20

tmnxOtuIfPmTtiRx

The value of tmnxOtuIfPmTtiRx indicates the Trail Trace Identifier
(TTI) for the Path Monitoring (PM) in the received OTU overhead.

TmnxOtuTtiString

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.21

tmnxOtuIfPmTtiExpMode

The value of tmnxOtuIfPmTtiExpMode specifies the type of expected
Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU
overhead.

Specifying a tmnxOtuIfPmTtiExpMode value of 'auto (0)' alon…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.22

tmnxOtuIfPmTtiExpCopyRx

tmnxOtuIfPmTtiExpCopyRx is used to copy the contents of
tmnxOtuIfPmTtiRx into tmnxOtuIfPmTtiExp.

TIMETRA-TC-MIBTmnxActionTyper/w

Type Values:

1	doAction
2	notApplicable

Description:

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.23

tmnxOtuIfPmTtiExp

The value of tmnxOtuIfPmTtiExp indicates the Trail Trace Identifier
(TTI) for the Path Monitoring (PM) that is expected to be received in
the OTU overhead.

A mismatch of the received and the expected PM T…

TmnxOtuTtiStringr/w

Constraints:
range: 0-64

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.24

tmnxOtuIfPsiTtiTxModeobsolete

The value of tmnxOtuIfPsiTtiTxMode specifies the type of Trail Trace
Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU
overhead.

Specifying a tmnxOtuIfPsiTtiTxMode value of 'auto (0)'…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.25

tmnxOtuIfPsiTtiTxobsolete

The value of tmnxOtuIfPsiTtiTx specifies the Trail Trace Identifier
(TTI) for the Payload Structure Identifier (PSI) in the OTU overhead.
This identifier can be a string or a non-printable sequence of bytes.
…

TmnxOtuTtiStringr/w

Type Constraints:
range: 0..255

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.26

tmnxOtuIfPsiTtiRxobsolete

The value of tmnxOtuIfPsiTtiRx indicates the Trail Trace Identifier
(TTI) for the Payload Structure Identifier (PSI) in the received OTU
overhead.

This object was made obsolete in SROS release 19.0.

TmnxOtuTtiString

Type Constraints:
range: 0..255

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.27

tmnxOtuIfPsiTtiExpModeobsolete

The value of tmnxOtuIfPsiTtiExpMode specifies the type of expected
Trail Trace Identifier (TTI) Payload Structure Identifier (PSI) in the
OTU overhead.

Specifying a tmnxOtuIfPsiTtiExpMode value of 'auto (…

TmnxOtuTtiModer/w

Type Values:

0	auto
1	string
2	bytes

Description:

The TmnxOtuTtiMode specifies the type of data transmitted in the Trail
Trace Identifier (TTI) Section of the OTU frame. The valid modes are
as follows:

- auto - Specifies that the TTI Section…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.28

tmnxOtuIfPsiTtiExpCopyRxobsolete

tmnxOtuIfPsiTtiExpCopyRx is used to copy the contents of
tmnxOtuIfPsiTtiRx into tmnxOtuIfPsiTtiExp.

This object was made obsolete in SROS release 19.0.

TIMETRA-TC-MIBTmnxActionTyper/w

Type Values:

1	doAction
2	notApplicable

Description:

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.29

tmnxOtuIfPsiTtiExpobsolete

The value of tmnxOtuIfPsiTtiExp indicates the Trail Trace Identifier
(TTI) for the Payload Structure Identifier (PSI) that is expected to
be received in the OTU overhead.

A mismatch of the received and th…

TmnxOtuTtiStringr/w

Constraints:
range: 0-255

Description:

The TmnxOtuTtiString specifies the data transmitted in the Trail Trace
Identifier (TTI) Section of the OTU frame. The TTI Section may consist
of octet values from the range 0..255 (0x00..0xFF).

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.30

tmnxOtuIfPsiPayloadTypeTx

The value of tmnxOtuIfPsiPayloadTypeTx specifies the Payload Type in
the transmitted OPU PSI overhead.

Specifying a value 'auto (0)' will provision the standard defined
payload type for the current OTU mo…

TmnxOtuPsiPayloadTyper/w

Type Values:

0	auto
1	exp
2	asyncCbr
3	syncCbr
4	atm
5	gfp
6	vcat
7	gmp
16	bitStrOctet
17	bitStrNoOctet
32	oduMux
128	rsvd80
129	rsvd81
130	rsvd82
131	rsvd83
132	rsvd84
133	rsvd85
134	rsvd86
135	rsvd87
136	rsvd88
137	rsvd89
138	rsvd8A
139	rsvd8B
140	rsvd8C
141	rsvd8D
142	rsvd8E
143	rsvd8F
253	nullTest
254	prbsTest

Description:

The TmnxOtuPsiPayloadType specifies the payload type identifier as
defined in table 15-8 of section 15.9.2.1.1 of ITU-T Rec. G.709 and
the codes are as follows:

- auto - Automatic based on op…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.31

tmnxOtuIfPsiPayloadTypeRx

The value of tmnxOtuIfPsiPayloadTypeRx indicates the Payload Type in
the received OPU PSI overhead.

TmnxOtuPsiPayloadType

Type Values:

0	auto
1	exp
2	asyncCbr
3	syncCbr
4	atm
5	gfp
6	vcat
7	gmp
16	bitStrOctet
17	bitStrNoOctet
32	oduMux
128	rsvd80
129	rsvd81
130	rsvd82
131	rsvd83
132	rsvd84
133	rsvd85
134	rsvd86
135	rsvd87
136	rsvd88
137	rsvd89
138	rsvd8A
139	rsvd8B
140	rsvd8C
141	rsvd8D
142	rsvd8E
143	rsvd8F
253	nullTest
254	prbsTest

Description:

The TmnxOtuPsiPayloadType specifies the payload type identifier as
defined in table 15-8 of section 15.9.2.1.1 of ITU-T Rec. G.709 and
the codes are as follows:

- auto - Automatic based on op…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.32

tmnxOtuIfPsiPayloadTypeExp

The value of tmnxOtuIfPsiPayloadTypeExp indicates the Payload Type
that is expected to be received in the OPU PSI overhead.

Specifying a value 'auto (0)' will provision the standard defined
payload type f…

TmnxOtuPsiPayloadTyper/w

Type Values:

0	auto
1	exp
2	asyncCbr
3	syncCbr
4	atm
5	gfp
6	vcat
7	gmp
16	bitStrOctet
17	bitStrNoOctet
32	oduMux
128	rsvd80
129	rsvd81
130	rsvd82
131	rsvd83
132	rsvd84
133	rsvd85
134	rsvd86
135	rsvd87
136	rsvd88
137	rsvd89
138	rsvd8A
139	rsvd8B
140	rsvd8C
141	rsvd8D
142	rsvd8E
143	rsvd8F
253	nullTest
254	prbsTest

Description:

The TmnxOtuPsiPayloadType specifies the payload type identifier as
defined in table 15-8 of section 15.9.2.1.1 of ITU-T Rec. G.709 and
the codes are as follows:

- auto - Automatic based on op…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.33

tmnxOtuIfGfpMappingEnable

The value of tmnxOtuIfGfpMappingEnable specifies whether or not the
GFP mapping mode of transporting 10GbE is enabled.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.34

tmnxOtuIfAsyncMappingEnable

The value of tmnxOtuIfAsyncMappingEnable specifies whether or not the
Asynchronous mapping mode of transporting the OTU client is enabled.

When this value is set to false, the OTU client is client is mapp…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.35

tmnxOtuIfSmTimReaction

The value of tmnxOtuIfSmTimReaction specifies the reaction that should
be taken in the event of a Section Monitor Trace Identifier Mismatch.

Specifying a value 'none (0)' indicates that no reaction should…

TmnxOtuTimReactionr/w

Type Values:

0	none
1	squelchRx

Description:

The TmnxOtuTimReaction specifies the type of reaction that should be
taken in the event of Trace Identifier (TTI) Mismatch or Payload Type
Mismatch. The valid modes are as follows:

- none - S…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.36

tmnxOtuIfPmTimReaction

The value of tmnxOtuIfPmTimReaction specifies the reaction that should
be taken in the event of a Path Monitor Trace Identifier Mismatch.

Specifying a value 'none (0)' indicates that no reaction should oc…

TmnxOtuTimReactionr/w

Type Values:

0	none
1	squelchRx

Description:

The TmnxOtuTimReaction specifies the type of reaction that should be
taken in the event of Trace Identifier (TTI) Mismatch or Payload Type
Mismatch. The valid modes are as follows:

- none - S…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.37

tmnxOtuIfPsiTimReactionobsolete

The value of tmnxOtuIfPsiTimReaction specifies the reaction that
should be taken in the event of a Payload Structure Identifier Trace
Mismatch.

Specifying a value 'none (0)' indicates that no reaction sho…

TmnxOtuTimReactionr/w

Type Values:

0	none
1	squelchRx

Description:

The TmnxOtuTimReaction specifies the type of reaction that should be
taken in the event of Trace Identifier (TTI) Mismatch or Payload Type
Mismatch. The valid modes are as follows:

- none - S…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.38

tmnxOtuIfPsiPlmReaction

The value of tmnxOtuIfPsiPlmReaction specifies the reaction that
should be taken in the event of a Payload Type mismatch.

Specifying a value 'none (0)' indicates that no reaction should occur
and therefor…

TmnxOtuTimReactionr/w

Type Values:

0	none
1	squelchRx

Description:

The TmnxOtuTimReaction specifies the type of reaction that should be
taken in the event of Trace Identifier (TTI) Mismatch or Payload Type
Mismatch. The valid modes are as follows:

- none - S…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.39

tmnxOtuIfReportedAlarmState

Indicates the monitored alarms currently being raised on the OTU port.
This field reports the active alarms raised in tmnxOtuIfAlarmState
which are also user-enabled in tmnxOtuIfCfgAlarms.

TmnxOtuAlarms

Type Values:

0	loc
1	los
2	lof
3	lom
4	otuAis
5	otuBerSf
6	otuBerSd
7	otuBdi
8	otuTim
9	otuIae
10	otuBiae
11	fecSf
12	fecSd
13	fecFail
14	fecUncorr
15	oduAis
16	oduOci
17	oduLck
18	oduBdi
19	oduTim
20	reserved20
21	opuPlm

Description:

The TmnxOtuAlarms specifies the alarms which are enabled or
outstanding against an OTU enabled interface. The valid alarms are as
follows:

- loc - Loss of Clock.
- los - Lo…

.1.3.6.1.4.1.6527.3.1.2.62.1.1.1.41

tmnxOtuIfFineGrBerTable

table

.1.3.6.1.4.1.6527.3.1.2.62.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the nokia variant from /opt/observium/mibs/nokia.

Command help

Walk tmnxOtuIfFineGrBerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OTU-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OTU-MIB::tmnxOtuIfFineGrBerTable'

The tmnxOtuIfFineGrBerTable has a row for each interface with OTU
encapsulation and contains configuration parameters related to fine
granularity pre-FEC BER SD and SF thresholds.

tmnxOtuIfFineGrBerEntry row .1.3.6.1.4.1.6527.3.1.2.62.1.2.1

The tmnxOtuIfFineGrBerEntry contains fine granularity pre-FEC BER SD
and SF threshold information for an individual OTU encapsulated
physical interface.

For the coefficient MIB attributes, 10 represents 1.0…

Indexes

No indexes recorded

Column Syntax OID

tmnxOtuIfFineGrBerSupported

The value of tmnxOtuIfFineGrBerSupported indicates whether or not fine
granularity BER thresholds are supported on this OTU encapsulated
physical interface.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.1

tmnxOtuIfFineGrBerSfThresh

The value of tmnxOtuIfFineGrBerSfThresh specifies the BER threshold
used to determine when to raise fecSf alarms (notification
tmnxOtuIfAlarmNotification).

Bit error rate computed must reach/exceed the th…

error bits in 1/10e-n bits receivedUnsigned32r/w

Constraints:
range: 3-8

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.2

tmnxOtuIfFineGrBerSdThresh

The value of tmnxOtuIfFineGrBerSdThresh specifies the BER threshold
used to determine when to raise fecSd alarms (notification
tmnxOtuIfAlarmNotification).

Bit error rate computed must reach/exceed the th…

error bits in 1/10e-n bits receivedUnsigned32r/w

Constraints:
range: 3-9

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.3

tmnxOtuIfFineGrBerSfThrCoef

The value of tmnxOtuIfFineGrBerSfThrCoef specifies the factor used to
fine tune the SF BER threshold (tmnxOtuIfFineGrBerSfThresh) for SF
alarm raising.

tenthsUnsigned32r/w

Constraints:
range: 10-99

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.4

tmnxOtuIfFineGrBerSdThrCoef

The value of tmnxOtuIfFineGrBerSdThrCoef specifies the factor used to
fine tune the SD BER threshold (tmnxOtuIfFineGrBerSdThresh) for SD
alarm raising.

tenthsUnsigned32r/w

Constraints:
range: 10-99

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.5

tmnxOtuIfFineGrBerSfThreshClr

The value of tmnxOtuIfFineGrBerSfThreshClr specifies the BER threshold
used to determine when to clear fecSf alarms (notification
tmnxOtuIfAlarmNotification).

error bits in 1/10e-n bits receivedUnsigned32r/w

Constraints:
range: 3-9

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.6

tmnxOtuIfFineGrBerSdThreshClr

The value of tmnxOtuIfFineGrBerSdThreshClr specifies the BER threshold
used to determine when to clear fecSd alarms (notification
tmnxOtuIfAlarmNotification).

error bits in 1/10e-n bits receivedUnsigned32r/w

Constraints:
range: 3-10

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.7

tmnxOtuIfFineGrBerSfThrClrCoef

The value of tmnxOtuIfFineGrBerSfThrClrCoef specifies the factor used
to fine tune the SF BER threshold (tmnxOtuIfFineGrBerSfThreshClr) for
SF alarm clearing.

tenthsUnsigned32r/w

Constraints:
range: 10-99

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.8

tmnxOtuIfFineGrBerSdThrClrCoef

The value of tmnxOtuIfFineGrBerSdThrClrCoef specifies the factor used
to fine tune the SD BER threshold (tmnxOtuIfFineGrBerSdThreshClr) for
SD alarm clearing.

tenthsUnsigned32r/w

Constraints:
range: 10-99

.1.3.6.1.4.1.6527.3.1.2.62.1.2.1.9

tmnxOtuIfRawStatsTable

table

.1.3.6.1.4.1.6527.3.1.2.62.2.1 · 1 row entry · 33 columns

Open in standard view

Uses the nokia variant from /opt/observium/mibs/nokia.

Command help

Walk tmnxOtuIfRawStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OTU-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OTU-MIB::tmnxOtuIfRawStatsTable'

The tmnxOtuIfRawStatsTable consists of the raw statistics associated
with the OTU interfaces contained in the tmnxOtuIfTable.

tmnxOtuIfRawStatsEntry row .1.3.6.1.4.1.6527.3.1.2.62.2.1.1

The tmnxOtuIfRawStatsEntry stores the statistics for an individual OTU
interface. tmnxOtuIfRawStatsEntry rows are created and destroyed by
the system when rows are added or removed in the tmnxOtuIfTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
tmnxOtuIfRawStatsFECCorrZeros The value of tmnxOtuIfRawStatsFECCorrZeros indicates the number of Forward Error Correction (FEC) corrected zeros.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.1`
tmnxOtuIfRawStatsOFFECCorrZeros The value of tmnxOtuIfRawStatsOFFECCorrZeros indicates the number of times the tmnxOtuIfRawStatsFECCorrZeros overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.2`
tmnxOtuIfRawStatsHCFECCorrZeros The value of tmnxOtuIfRawStatsHCFECCorrZeros indicates the High Capacity number of Forward Error Correction (FEC) corrected zeros.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.3`
tmnxOtuIfRawStatsFECCorrOnes The value of tmnxOtuIfRawStatsFECCorrOnes indicates the number of Forward Error Correction (FEC) corrected ones.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.4`
tmnxOtuIfRawStatsOFFECCorrOnes The value of tmnxOtuIfRawStatsOFFECCorrOnes indicates the number of times the tmnxOtuIfRawStatsFECCorrOnes overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.5`
tmnxOtuIfRawStatsHCFECCorrOnes The value of tmnxOtuIfRawStatsHCFECCorrOnes indicates the High Capacity number of Forward Error Correction (FEC) corrected ones.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.6`
tmnxOtuIfRawStatsFECUncorrSR The value of tmnxOtuIfRawStatsFECUncorrSR indicates the number of Forward Error Correction (FEC) Uncorrectable Sub-Rows.	Sub-RowsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.7`
tmnxOtuIfRawStatsOFFECUncorrSR The value of tmnxOtuIfRawStatsOFFECUncorrSR indicates the number of times the tmnxOtuIfRawStatsFECUncorrSR overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.8`
tmnxOtuIfRawStatsHCFECUncorrSR The value of tmnxOtuIfRawStatsHCFECUncorrSR indicates the High Capacity number of Forward Error Correction (FEC) Uncorrectable Sub-Rows.	Sub-RowsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.9`
tmnxOtuIfRawStatsFECSES The value of tmnxOtuIfRawStatsFECSES indicates the number of Forward Error Correction (FEC) Severely Errors Seconds (SES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.10`
tmnxOtuIfRawStatsSMBIP8 The value of tmnxOtuIfRawStatsSMBIP8 indicates the number of Section Monitoring (SM) BIP8 errors.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.11`
tmnxOtuIfRawStatsOFSMBIP8 The value of tmnxOtuIfRawStatsOFSMBIP8 indicates the number of times the tmnxOtuIfRawStatsSMBIP8 overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.12`
tmnxOtuIfRawStatsHCSMBIP8 The value of tmnxOtuIfRawStatsHCSMBIP8 indicates the High Capacity number of Section Monitoring (SM) BIP8 errors.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.13`
tmnxOtuIfRawStatsSMBEI The value of tmnxOtuIfRawStatsSMBEI indicates the number of Section Monitoring (SM) Backward Error Indication (BEI) errors.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.14`
tmnxOtuIfRawStatsOFSMBEI The value of tmnxOtuIfRawStatsOFSMBEI indicates the number of times the tmnxOtuIfRawStatsSMBEI overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.15`
tmnxOtuIfRawStatsHCSMBEI The value of tmnxOtuIfRawStatsHCSMBEI indicates the High Capacity number of Section Monitoring (SM) Backward Error Indication (BEI) errors.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.16`
tmnxOtuIfRawStatsSMSES The value of tmnxOtuIfRawStatsSMSES indicates the number of Section Monitoring (SM) Severely Errored Seconds (SES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.17`
tmnxOtuIfRawStatsPMBIP8 The value of tmnxOtuIfRawStatsPMBIP8 indicates the number of Path Monitoring (PM) BIP8 errors.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.18`
tmnxOtuIfRawStatsOFPMBIP8 The value of tmnxOtuIfRawStatsOFPMBIP8 indicates the number of times the tmnxOtuIfRawStatsPMBIP8 overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.19`
tmnxOtuIfRawStatsHCPMBIP8 The value of tmnxOtuIfRawStatsHCPMBIP8 indicates the High Capacity number of Path Monitoring (PM) BIP8 errors.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.20`
tmnxOtuIfRawStatsPMBEI The value of tmnxOtuIfRawStatsPMBEI indicates the number of Path Monitoring (PM) Backward Error Indication (BEI) errors.	bitsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.21`
tmnxOtuIfRawStatsOFPMBEI The value of tmnxOtuIfRawStatsOFPMBEI indicates the number of times tmnxOtuIfRawStatsPMBEI overflowed.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.22`
tmnxOtuIfRawStatsHCPMBEI The value of tmnxOtuIfRawStatsHCPMBEI indicates the High Capacity number of Path Monitoring (PM) Backward Error Indication (BEI) errors.	bitsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.23`
tmnxOtuIfRawStatsPMSES The value of tmnxOtuIfRawStatsPMSES indicates the number of Path Monitoring (PM) Severely Errored Seconds (SES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.24`
tmnxOtuIfRawStatsFECES The value of tmnxOtuIfRawStatsFECES indicates the number of Forward Error Correction (FEC) Errors Seconds (ES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.25`
tmnxOtuIfRawStatsFECUAS The value of tmnxOtuIfRawStatsFECUAS indicates the number of Forward Error Correction (FEC) Unavailable Seconds (UAS).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.26`
tmnxOtuIfRawStatsSMES The value of tmnxOtuIfRawStatsSMES indicates the number of Section Monitoring (SM) Errored Seconds (ES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.27`
tmnxOtuIfRawStatsSMUAS The value of tmnxOtuIfRawStatsSMUAS indicates the number of Section Monitoring (SM) Unavailable Seconds (UAS).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.28`
tmnxOtuIfRawStatsPMES The value of tmnxOtuIfRawStatsPMES indicates the number of Path Monitoring (PM) Errored Seconds (ES).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.29`
tmnxOtuIfRawStatsPMUAS The value of tmnxOtuIfRawStatsPMUAS indicates the number of Path Monitoring (PM) Unavailable Seconds (UAS).	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.30`
tmnxOtuIfRawStatsNPJ The value of tmnxOtuIfRawStatsNPJ indicates the number of Negative Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.31`
tmnxOtuIfRawStatsPPJ The value of tmnxOtuIfRawStatsPPJ indicates the number of Positive Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame.	countSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.32`
tmnxOtuIfRawStatsElapsedSec The value of tmnxOtuIfRawStatsElapsedSec indicates the number of Elapsed seconds since the last OTU raw statistics clearing.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6527.3.1.2.62.2.1.1.33`

tmnxOtuIfIntervalStatsTable

table

.1.3.6.1.4.1.6527.3.1.2.62.2.2 · 1 row entry · 21 columns

Open in standard view

Uses the nokia variant from /opt/observium/mibs/nokia.

Command help

Walk tmnxOtuIfIntervalStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-OTU-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-OTU-MIB::tmnxOtuIfIntervalStatsTable'

The tmnxOtuIfIntervalStatsTable consists of the statistic elements
associated with the OTU interfaces contained in the tmnxOtuIfTable.

tmnxOtuIfIntervalStatsEntry row .1.3.6.1.4.1.6527.3.1.2.62.2.2.1

The tmnxOtuIfIntervalStatsEntry stores the statistics for an
individual OTU interface per row. tmnxOtuIfIntervalStatsEntry objects
are created and destroyed by the system when rows are added or removed
in the tmnxOtuIfT…

Indexes

IF-MIBifIndex tmnxOtuIfIntvlStatsIndex

Column Syntax OID

tmnxOtuIfIntvlStatsIndex

The tmnxOtuIfIntvlStatsIndex specifies the 15 minute statistic
snapshot for the OTU interface. The interval index value of 0
specifies the current raw 15 minute statistic window. The value of one
indicates the most rece…

Unsigned32

Constraints:
range: 0-96

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.1

tmnxOtuIfIntvlStatsIsValid

The value of tmnxOtuIfIntvlStatsIsValid indicates whether or not the
current statistics interval is valid.

The raw interval (tmnxOtuIfIntvlStatsIndex set to 0) is always false.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.2

tmnxOtuIfIntvlStatsFECCorrZeros

The value of tmnxOtuIfIntvlStatsFECCorrZeros indicates the number of
Forward Error Correction (FEC) corrected zeros.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.3

tmnxOtuIfIntvlStatsFECCorrOnes

The value of tmnxOtuIfIntvlStatsFECCorrOnes indicates the number of
Forward Error Correction (FEC) corrected ones.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.4

tmnxOtuIfIntvlStatsFECUncorrSR

The value of tmnxOtuIfIntvlStatsFECUncorrSR indicates the number of
Forward Error Correction (FEC) Uncorrectable Sub-Rows.

Sub-RowsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.5

tmnxOtuIfIntvlStatsFECSES

The value of tmnxOtuIfIntvlStatsFECSES indicates the number of Forward
Error Correction (FEC) Severely Errors Seconds (SES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.6

tmnxOtuIfIntvlStatsSMBIP8

The value of tmnxOtuIfIntvlStatsSMBIP8 indicates the number of Section
Monitoring (SM) BIP8 errors.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.7

tmnxOtuIfIntvlStatsSMBEI

The value of tmnxOtuIfIntvlStatsSMBEI indicates the number of Section
Monitoring (SM) Backward Error Indication (BEI) errors.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.8

tmnxOtuIfIntvlStatsSMSES

The value of tmnxOtuIfIntvlStatsSMSES indicates the number of Section
Monitoring (SM) Severely Errored Seconds (SES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.9

tmnxOtuIfIntvlStatsPMBIP8

The value of tmnxOtuIfIntvlStatsPMBIP8 indicates the number of Path
Monitoring (PM) BIP8 errors.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.10

tmnxOtuIfIntvlStatsPMBEI

The value of tmnxOtuIfIntvlStatsPMBEI indicates the number of Path
Monitoring (PM) Backward Error Indication (BEI) errors.

bitsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.11

tmnxOtuIfIntvlStatsPMSES

The value of tmnxOtuIfIntvlStatsPMSES indicates the number of Path
Monitoring (PM) Severely Errored Seconds (SES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.12

tmnxOtuIfIntvlStatsFECES

The value of tmnxOtuIfIntvlStatsFECES indicates the number of Forward
Error Correction (FEC) Errors Seconds (ES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.13

tmnxOtuIfIntvlStatsFECUAS

The value of tmnxOtuIfIntvlStatsFECUAS indicates the number of Forward
Error Correction (FEC) Unavailable Seconds (UAS).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.14

tmnxOtuIfIntvlStatsSMES

The value of tmnxOtuIfIntvlStatsSMES indicates the number of Section
Monitoring (SM) Errored Seconds (ES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.15

tmnxOtuIfIntvlStatsSMUAS

The value of tmnxOtuIfIntvlStatsSMUAS indicates the number of Section
Monitoring (SM) Unavailable Seconds (UAS).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.16

tmnxOtuIfIntvlStatsPMES

The value of tmnxOtuIfIntvlStatsPMES indicates the number of Path
Monitoring (PM) Errored Seconds (ES).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.17

tmnxOtuIfIntvlStatsPMUAS

The value of tmnxOtuIfIntvlStatsPMUAS indicates the number of Path
Monitoring (PM) Unavailable Seconds (UAS).

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.18

tmnxOtuIfIntvlStatsNPJ

The value of tmnxOtuIfIntvlStatsNPJ indicates the number of Negative
Pointer justifications that occurred during the asynchronous demapping
of the received payload inside the OTU frame.

countSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.19

tmnxOtuIfIntvlStatsPPJ

The value of tmnxOtuIfIntvlStatsPPJ indicates the number of Positive
Pointer justifications that occurred during the asynchronous demapping
of the received payload inside the OTU frame.

countSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.20

tmnxOtuIfIntvlStatsElapsedSec

The value of tmnxOtuIfIntvlStatsElapsedSec indicates the number of
Elapsed seconds in the current statistics interval.

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.3.1.2.62.2.2.1.21