T11-FC-FABRIC-LOCK-MIB Table View

A table containing information about the 'managing'
switch of each current Fabric lock, e.g., for the
types of Servers defined in FC-GS-5.
          
Each entry in this table represents either:
          
1) a current Fabric lock,
2) an in-progress attempt, requested via SNMP, to set up
   a lock, or
3) a failed attempt, requested via SNMP, to set up a lock.
          
If an entry is created via t11FLockRowStatus, but the
attempt to obtain the lock fails, then the entry continues
to exist until it is deleted via t11FLockRowStatus, or
it is overwritten by the lock being established via
a means other than SNMP.  However, rows created via
t11FLockRowStatus are not retained over restarts.

t11FLockEntry row .1.3.6.1.2.1.159.1.1.1.1

Each entry contains information specific to a current
Fabric lock set up by a particular 'managing' switch on a
particular Fabric. The 'managing switch' is identified by
values of fcmInstanceIndex and fcmSwitchIndex.
…

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex t11FLockFabricIndex t11FLockApplicationID

Column	Syntax	OID
t11FLockFabricIndex A unique index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index val…	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.159.1.1.1.1.1
t11FLockApplicationID The Application_ID value that identifies the type of application for which the Fabric is locked. A lock established via Acquire Change Authorization (ACA) does not, strictly speaking, have an Application_…	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.159.1.1.1.1.2
t11FLockInitiatorType This object specifies what type of initiator generated the request that caused this lock to be established: other - none of the following. ssb - this lock was established …	Enumeration Enumerated Values: 1 other 2 ssb 3 cli 4 snmp	.1.3.6.1.2.1.159.1.1.1.1.3
t11FLockInitiator This object specifies the initiator whose request caused this lock to be established. If the value of the corresponding instance of t11FLockInitiatorType is 'ssb', this object will contain the FC_ID of th…	OctetString Constraints: range: 0-64	.1.3.6.1.2.1.159.1.1.1.1.4
t11FLockInitiatorIpAddrType This object specifies the type of IP address contained in the corresponding instance of t11FLockInitiatorIpAddr. If the IP address of the location of the initiator is unknown or not applicable, this object has the value…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.159.1.1.1.1.5
t11FLockInitiatorIpAddr This object specifies the IP address of the location of the initiator that established this lock via a request of the type given by the corresponding instance of t11FLockInitiatorType. In cases where the corresponding …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.159.1.1.1.1.6
t11FLockStatus This object gives the current status of the lock: 'active' -- the lock is currently established. 'settingUp' -- the 'managing' switch is currently attempting to set up the lo…	Enumeration Enumerated Values: 1 active 2 settingUp 3 rejectFailure 4 otherFailure	.1.3.6.1.2.1.159.1.1.1.1.7
t11FLockRejectReasonCode When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's reason code.	T11-FC-NAME-SERVER-MIBT11NsGs4RejectReasonCode Type Values: 1 none 2 invalidCmdCode 3 invalidVerLevel 4 logicalError 5 invalidIUSize 6 logicalBusy 7 protocolError 8 unableToPerformCmdReq 9 cmdNotSupported 10 serverNotAvailable 11 couldNotEstabSession 12 vendorError	.1.3.6.1.2.1.159.1.1.1.1.8
t11FLockRejectReasonCodeExp When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's reason code explanation.	OctetString Constraints: range: 0-1	.1.3.6.1.2.1.159.1.1.1.1.9
t11FLockRejectReasonVendorCode When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's vendor-specific code.	OctetString Constraints: range: 0-1	.1.3.6.1.2.1.159.1.1.1.1.10
t11FLockRowStatus The status of this conceptual row. A row in this table can be modified or deleted via this object only when the row's value of t11FLockInitiatorType is 'snmp'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.159.1.1.1.1.11