SUPERMICRO-PTP-MIB Table View

Information describing the parameters of the switch/router
instances.

fsPtpEntry row .1.3.6.1.4.1.10876.101.2.45.1.1.4.1

Information describing the parameters of the switch/router per
virtual instance. The entry in this table is created using the
fsPtpContextRowStatus object only if the virtual context is
existing in the system. The entr…

Indexes

fsPtpContextId

Column	Syntax	OID
fsPtpContextId A 32-bit unique context identifier for each entry. Each virtual context will be able to run PTP protocol individually and this distinguishes mutiple virtual contexts present in the switch/router.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.1
fsPtpAdminStatus Enable or disable the Precision Time Protocol on this virtual context. The default value is disabled. In disabled state, the PTP protocol will be non operational in the virtual context. The resources alone will be re…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.2
fsPtpTraceOption This object takes the same value as fsPtpGblTraceOption. This object accepts the trace values directly from the user. Alternatively, this object will also be affected if the global trace object is modified	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.3
fsPtpContextType Displays the type of context	Enumeration Enumerated Values: 1 l2Context 2 l3Context 3 l2Andl3Context	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.4
fsPtpPrimaryDomain This object specifies the primary domain. This is the domain which can configure the system clock. By default, this will be configured to default domain id (0). The administrator should explicitly configure this object.…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.5
fsPtpContextRowStatus RowStatus for creating/deleting the entries into this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.1.4.1.6

Table Contains domains information of the node

fsPtpDomainDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.2.1.1

Contains domains information of the node

Indexes

fsPtpContextId fsPtpDomainNumber

Column	Syntax	OID
fsPtpDomainNumber This is the unique identifier of the domain. This domain id defines the scope of the PTP message communication, state, operations, data sets and timescale. The domain identifier 0 corresponds to default domain id. Doma…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.2.1.1.1
fsPtpDomainClockMode This indicates the operating mode of the clock in this domain. boundary - specifies it is boundary clock. ordinary - specifies it is ordinary clock. transparent - specifies it is end-to-end/peer-to-peer transparent cl…	Enumerationr/w Enumerated Values: 1 boundary 2 ordinary 3 transparent 4 forward 5 management	.1.3.6.1.4.1.10876.101.2.45.1.2.1.1.2
fsPtpDomainClockIdentity This is the unique identity of the local clock or management node associated with this domain. The clock identity values shall be taken from either the IEEE EUI-64 individual assigned numbers as specified in 7.5.2.2.2,…	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.2.1.1.3
fsPtpDomainGMClusterQueryInterval This is the log to the base 2 of mean interval in seconds between unicast announce messages from grand master cluster member, it will be used.If a request is not granted by a port, the request shall be repeated after…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.2.1.1.4
fsPtpDomainRowStatus RowStatus for creating the entries into this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.2.1.1.5

Table Contains information of the clock on particular domain.
entry will be created in this table with defalut values
once the entry is created in the fsPtpDomainDataSetTable with 
fsPtpDomainClockMode as boundary or an ordinary clock. If the clock 
mode is changed to other than boundary or an ordinary the corresponding 
entry in this table will be deleted

fsPtpClockDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.3.1.1

Contains the information of the clock on a particular doamin. This
table will be initialised with default values if the clock is
operating as a boundary or ordinary clock in the domain.

Indexes

No indexes recorded

Column	Syntax	OID
fsPtpClockIdentity This is the unique identity of the local clock or management node. This should be the fsptpDomainClockIdentity of the domain indicated by the fsPtpDomainNumber. Configuration of this value will take effect only when th…	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.1
fsPtpClockTwoStepFlag This value is TRUE if the clock is two step clock, otherwise it is FALSE. If this value is configured as TRUE, then PTP will transmit the originTimeStamp only through follow-up messages. Configuring this value will mak…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.2
fsPtpClockNumberPorts This indicates the number of PTP ports on the device. For an ordinary clock this value should be 1. This value can be configured if fsPtpDomainRowStatus is not in service	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.3
fsPtpClockClass It denotes the traceability of the time or frequency distributed by the grandmaster clock. This value is used by the BMC algorithm to select the best master clock. This should be initialized after initializing ptpClo…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.4
fsPtpClockAccuracy This indicates the accuracy of the clock. This should be initialized after ptpClockClass. This initialization value depends on the accuracy of the clock during initialization. This value depends on ptpClockClass and ptp…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.5
fsPtpClockOffsetScaledLogVariance This value is an estimate of the variations of the local clock from a linear timescale when it is not synchronized to another clock using the protocol. The initialization value depends on the inherent characteristics …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.6
fsPtpClockPriority1 This value is used by BMC algorithm to select the best master clock. Lower values take precedence.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.7
fsPtpClockPriority2 This value is used by BMC algorithm to select the best master clock. This is used as a tiebreaker when the BMC failes to order the clock using ptpClockPriority1, ptpClockClass, ptpClockAccuracy and ptpClockOffsetSca…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.8
fsPtpClockSlaveOnly Configuring this value as true will make the clock to behave as slave clock. A boundary clock can not be a slave only clock.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.9
fsPtpClockPathTraceOption This is the path trace enable/disable option. Configuring this value as true will make the path trace mechanism operational.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.10
fsPtpClockAccMasterMaxSize This is the Maximum number of acceptable master table Entries configured in the domain in this context.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.11
fsPtpClockSecurityEnabled This is used to enable/disable of security protocol. Configuring this as TRUE, makes all the PTP communication to use Security Protocol extension. Default value is false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.12
fsPtpClockNumOfSA This represents the maximum number of security associations supported by the clock, including all incoming and outgoing SAs as well as both static and dynamic SAs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.3.1.1.13

Table Contains synchronization information on a particular
domain. entry will be created in this table with defalut 
values once the entry is created in the fsPtpDomainDataSetTable
with fsPtpDomainClockMode as boundary or an ordinary clock. 
If the clock mode is changed to other than boundary or an 
ordinary the corresponding entry in this table will be deleted.

fsPtpCurrentDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.4.1.1

Contains synchronization information on a particular domain.

Indexes

No indexes recorded

Column	Syntax	OID
fsPtpCurrentStepsRemoved This is the number of communication path traversed between local clock and the grandmaster clock. Slave clock will update this field once port is selected as slave.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.1
fsPtpCurrentOffsetFromMaster This is the current value of the time difference scalednanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scalednan…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.2
fsPtpCurrentMeanPathDelay This is the current value of the mean propagation time scalenanoseconds between a master and a slave as computed by the slave. The time interval field represents the values in scalednanoseconds. The scal…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.3
fsPtpCurrentMasterToSlaveDelay This attribute is the propagation time for a sync message travelling between master to slave clocks The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.4
fsPtpCurrentSlaveToMasterDelay This attribute is the propagation time for a sync message travelling between slave to master clocks The time interval field represents the values in scalednanoseconds. The scalednanoseconds member is the …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.5

Table Contains parent clock information on a particular domain.
entry will be created in this table with defalut 
values once the entry is created in the fsPtpDomainDataSetTable
with fsPtpDomainClockMode as boundary or an ordinary clock. 
If the clock mode is changed to other than boundary or an 
ordinary the corresponding entry in this table will be deleted.

fsPtpParentDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.5.1.1

Contains parent clock information on a particular domain.

Indexes

No indexes recorded

Column	Syntax	OID
fsPtpParentClockIdentity This is the clock identity of the port on the master that issues sync messages used in synchronizing this clock. The initial value of this field is the value of ptpClockIdentity	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.1
fsPtpParentPortNumber This is the port number identity of the port on the master that issues sync message used in synchronizing this clock. Combination of ptpParentClockIdentity and ptpParentPortNumber gives the port identity of the parent…	FsPtpPortNumber	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.2
fsPtpParentStats TRUE value of this field indicates that the clock has a slave port and computed statistically valid estimate of observedParentOffsetScaledLogVariance and observedParentClockPhaseChangeRate. The initial value of this …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.3
fsPtpParentObservedOffsetScaledLogVariance This is an estimate of the parent clock's PTP variance as observed by the slave clock. Computation of this value is optional one. If this is not computed then ptpParentStats will be set false. The initial value is 0xF…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.4
fsPtpParentObservedClockPhaseChangeRate This is an estimate of the parent clock's phase change rate as observed by the slave clock. Computation of this value is optional one. If this is not computed then ptpParentStats will be set false. The initial value i…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.5
fsPtpParentGMClockIdentity This is the clock identity attribute of the grand master clock. The initial value is ptpClockIdentity.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.6
fsPtpParentGMClockClass This is the clock class of the grandmaster. The initialization value of this variable is ptpClockClass.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.7
fsPtpParentGMClockAccuracy This is the clock accuracy of the grandmaster. The initialization value of this variable is ptpClockAccuracy	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.8
fsPtpParentGMClockOffsetScaledLogVariance This is the offset scaled log variance of the grandmaster. The initialization value of this variable is ptpClockOffsetScaledLogVariance	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.9
fsPtpParentGMPriority1 This is the priority1 of the grandmaster clock. The initialization value of this variable is ptpClockPriority1	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.10
fsPtpParentGMPriority2 This is the priority2 of the grandmaster clock. The initialization value of this variable is ptpClockPriority2	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.11
fsPtpParentClockObservedDrift This is attribute of the parent dataset represents the observed drift of the master clock to which a slave clock is synchronizing	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.5.1.1.12

Table Contains parent Time properties information of the
clock on a particular domain. entry will be created in 
this table with defalut values once the entry is created 
in the fsPtpDomainDataSetTable with fsPtpDomainClockMode as
boundary or an ordinary clock. If the clock mode is changed 
to other than boundary or an ordinary the corresponding 
entry in this table will be deleted.

fsPtpTimeDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.6.1.1

Contains parent Time properties information of the
clock on a particular domain

Indexes

No indexes recorded

Column	Syntax	OID
fsPtpTimeCurrentUTCOffset If systems epoch is the PTP epoch then this value indicates the offset in seconds between TAI and UTC.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.1
fsPtpTimeCurrentUTCOffsetValid Value of this variable is TRUE if the fsPtpTimeCurrentUTCOffset is known to be correct.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.2
fsPtpTimeLeap59 If the systems epoch is PTP epoch then TRUE value of this variable indicates that the last minute of the current UTC day contains 59 seconds.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.3
fsPtpTimeLeap61 If the systems epoch is PTP epoch then TRUE value of this variable indicates that the last minute of the current UTC day contains 61 seconds.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.4
fsPtpTimeTimeTraceable This variable is TRUE if the timescale and value of fsPtpTimeCurrentUTCOffset are traceable to a primary reference otherwise, the value shall be FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.5
fsPtpTimeFrequencyTraceable This variable is TRUE if the frequecy determining the timescale is traceable to a primary reference otherwise, the value shall be FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.6
fsPtpTimeTimeSource This is the source of time used by the grandmaster clock. If the time source is known at the time of initialization then the value will be set to that otherwise the initial value is INTERNAL_OSCILLATOR(160).	Enumeration Enumerated Values: 16 atomicclock 32 gps 48 terrestrialradio 64 ptp 80 ntp 96 handset 144 other 160 internaloscillator 255 reserved	.1.3.6.1.4.1.10876.101.2.45.1.6.1.1.7

Table Contains PTP configuration information
for a particular port of boundary or an ordinary clock

fsPtpPortConfigDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.7.1.1

Contains PTP configuration information for a particular port.
valid fsPtpPortInterfaceType and fsPtpPortIfaceNumber need to be given to
make this entry active

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpPortIndex

Column	Syntax	OID
fsPtpPortIndex The index value used to identify the port component on the device. The value of this object is used as a port index to the fsPtpPortConfigDataSetTable.Since ifindex will not be created in CFA for vlan interfaces. Fre…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.1
fsPtpPortClockIdentity This is the clock Identity of the port	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.2
fsPtpPortInterfaceType This denotes the type of the interface. PTP port bears a seperate meaning than the one that are normally defined in interface mibs. PTP can run over physical interfaces, VLAN identifiers or IVR interfaces. Hence this o…	Enumerationr/w Enumerated Values: 1 udpipv4 2 udpipv6 3 ieee8023 4 devicenet 5 controlnet 6 profitnet 7 ieee8021 65534 unknown	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.3
fsPtpPortIfaceNumber This denotes the interface number assigned in the interface manager of the system. PTP assigned interface numbers are different from the the values assigned in interface mib. This object denotes the value assigned in th…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.4
fsPtpPortState This denotes the PTP State of the PTP port as computed by the PTP State event machine. initializing: While a port is in the INITIALIZING state, the port initializes its data sets, hardware, and communic…	Enumeration Enumerated Values: 0 faulty 1 disabled 2 initializing 3 listening 4 uncalibrated 5 slave 6 premaster 7 master 8 passive	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.5
fsPtpPortMinDelayReqInterval This is the log to the base 2 of the delay request interval in seconds. This speifies the time to the members devices to send delay request messages when the port is in the master. specify the minimum permitted mean t…	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.6
fsPtpPortPeerMeanPathDelay This is an estimate of the current one-way propagation delay in scalednanoseconds on the link attached to this port, calculated using the peer delay mechanism. If the value of the fsPtpPortDelayMechanism is end-to-en…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.7
fsPtpPortAnnounceInterval This is the log to the base 2 of the mean Announce message intervali in seconds.	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.8
fsPtpPortAnnounceReceiptTimeout This is the Announce receipt time out value. This should be an integral multiple of announce interval in seconds	Integer32r/w Constraints: range: 2-10	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.9
fsPtpPortSyncInterval This is the logarithm to the base 2 of the sync message interval in seconds	Integer32r/w Constraints: range: -1-1	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.10
fsPtpPortSynclimit This specifies the maximum clock offset value before PTP attempts to resynchronize.The range of this object should be 50 .. 1000000000 nanoseconds The time interval field represents the values in scaled…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.11
fsPtpPortDelayMechanism This indicates the propagation delay measuring option used by the port in computing meanpathDelay.	Enumerationr/w Enumerated Values: 1 endtoend 2 peertopeer 255 disabled	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.12
fsPtpPortMinPdelayReqInterval This is the value of Pdelay_Req interval in seconds. This value will be specified in terms of logarithm to the base 2.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.13
fsPtpPortVersionNumber This indicates the PTP version in use on the port.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.14
fsPtpPortUnicastNegOption This indicates the unicast negotiation enable/disable option.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.15
fsPtpPortUnicastMasterMaxSize This indicates the maximum size of the Unicast master table in this port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.16
fsPtpPortAccMasterEnabled This is the enable/disable option for Acceptable master table in this Port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.17
fsPtpPortNumOfAltMaster A port, port-A not in the MASTER state, shall transmit multicast Announce messages when the number of other ports that: > Are currently transmitting qualified (see 9.3.2.5) Announce messages with flagField.alter…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.18
fsPtpPortAltMulcastSync This is TRUE and if the port is transmitting multicast announce message with alternate master flag true then the slave port can also transmit multicast sync messages with alternate master flag as true	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.19
fsPtpPortAltMulcastSyncInterval This is interval in seconds between the sync messages transmitted with alternate master flag as true	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.20
fsPtpPortPtpStatus The effective Operational state of the port in PTP. PTP will be operational over this interface only when the value of this object is set to true. Otherwise PTP will be non-operational over this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.21
fsPtpPortRcvdAnnounceMsgCnt This is the count of Announce messages received on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.22
fsPtpPortRcvdSyncMsgCnt This is the count of sync messages received on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.23
fsPtpPortRcvdDelayReqMsgCnt This is the count of delay request messages received on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.24
fsPtpPortRcvdDelayRespMsgCnt This is the count of delay response messages received on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.25
fsPtpPortTransDelayReqMsgCnt This is the count of delay request messages transmitted on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.26
fsPtpPortDiscardedMsgCnt This is the discarded ptp message count on the port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.27
fsPtpPortRowStatus RowStatus for creating the entries into this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.28

Table contains information about the foreign 
master

fsPtpForeignMasterDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.8.1.1

Contains information about the foreign master

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpForeignMasterClockIdentity fsPtpForeignMasterPortIndex fsPtpPortIndex

Column	Syntax	OID
fsPtpForeignMasterClockIdentity Source Clock identity on which the announce message is received from foreign master	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.8.1.1.1
fsPtpForeignMasterPortIndex Source port index on which the announce message is received from foreign master	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.2.45.1.8.1.1.2
fsPtpForeignMasterAnnounceMsgs This indicates the number of Announce messages from the foreign master	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.8.1.1.3

Table Contains Transparent clock information on a 
particular domain. entry will be created in 
this table with defalut values once the entry is created 
in the fsPtpDomainDataSetTable with fsPtpDomainClockMode as
e2etransparent or p2ptransparent. If the clock mode is changed 
to other than e2etransparent or p2ptransparent the corresponding 
entry in this table will be deleted.

fsPtpTransparentDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.9.1.1

Contains Transparent clock information on a particular domain.
An entry will be created in this table with default values, only
if the clock is operating as a transparent clock in this domain.

Indexes

No indexes recorded

Column	Syntax	OID
fsPtpTransparentClockIdentity This is the unique identity of the local clock	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.9.1.1.1
fsPtpTransparentClockTwoStepFlag This value is TRUE if the clock is two step clock, otherwise it is FALSE. Configuring this value will make the PTP to move all the ports associated with this domain identifier to move to INITIALIZING state. Default va…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.9.1.1.2
fsPtpTransparentClockNumberPorts This indicates the number of ports in PTP device used by the transparent clock. This value can be configured if fsPtpDomainRowStatus is not in service	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.10876.101.2.45.1.9.1.1.3
fsPtpTransparentClockDelaymechanism If the transparent clock is end-to-end then value of this variable is 01, if the transparent clock is peer-to-peer then value of this variable is 02	Enumerationr/w Enumerated Values: 1 endtoend 2 peertopeer	.1.3.6.1.4.1.10876.101.2.45.1.9.1.1.4
fsPtpTransparentClockPrimaryDomain This is the domain number of the primary syntonization domain	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.9.1.1.5

Table contains the port configuration of the particular
port of the transparent clock

fsPtpTransparentPortDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.10.1.1

PTP configuration information for a particular port for the
transparent clock. Valid fsPtpTransparentPortInterfaceType
and fsPtpTransparentPortIfaceNumber should be given to
create the entry in this table otherwise e…

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpTransparentPortIndex

Column	Syntax	OID
fsPtpTransparentPortIndex The index value used to identify the port component on the transparent clock. The value of this object is used as a port index to the ptpTransparentPortDataSetTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.1
fsPtpTransparentPortInterfaceType This denotes the type of the interface. PTP port bears a seperate meaning than the one that are normally defined in interface mibs. PTP can run over physical interfaces, VLAN identifiers or IVR interfaces. Hence this o…	Enumerationr/w Enumerated Values: 1 udpipv4 2 udpipv6 3 ieee8023 4 devicenet 5 controlnet 6 profitnet 7 ieee8021 65534 unknown	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.2
fsPtpTransparentPortIfaceNumber This denotes the interface number assigned in the interface manager of the system. PTP assigned interface numbers are different from the the values assigned in interface mib. This object denotes the value assigned in th…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.3
fsPtpTransparentPortClockIdentity This is the clock identity of the transparent clock. This is the index to the ptpPortConfigDataSetTable.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.4
fsPtpTransparentPortMinPdelayReqInterval This is the Pdelay_Req interval. This is used if the transparent clock is Peer-to-Peer.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.5
fsPtpTransparentPortFaultyFlag This is the faulty status of the port. This value will be made TRUE if the port enters into Faulty state.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.6
fsPtpTransparentPortPeerMeanPathDelay If the ptpTransparentClockDelaymechanism is P2P then this indicates the mean propagation delay of the ingress link connected to this port The time interval field represents the values in scalednanosecon…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.7
fsPtpTransparentPortPtpStatus The effective Operational state of the port in PTP. PTP will be operational over this interface only when the value of this object is set to true. Otherwise PTP will be non-operational over this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.8
fsPtpTransparentPortRowStatus RowStatus for creating the entries into this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.10.1.1.9

Table contains grand master cluster members. Max
number of entries in this table should not be more
than 5.
          
Currently this table is not supported.
This table will be supported in the future

fsPtpGrandMasterClusterDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.11.1.1

Contains grand master cluster members

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpGrandMasterClusterNetworkProtocol fsPtpGrandMasterClusterAddLength fsPtpGrandMasterClusterAddr

Column	Syntax	OID
fsPtpGrandMasterClusterNetworkProtocol This indicates the network protocol of the port of the grand master cluster	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.11.1.1.1
fsPtpGrandMasterClusterAddLength This indicates the length of the fsptpGrandMasterClusterAddr	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.11.1.1.2
fsPtpGrandMasterClusterAddr This indicates the protocol address of the port of the grand master cluster member	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.11.1.1.3
fsPtpGrandMasterClusterRowStatus This indicates the status of this entry, is valid or not.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.11.1.1.4

Table contains unicast masters on the port
          
Currently this table is not supported.
This table will be supported in the future

fsPtpUnicastMasterDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.12.1.1

Contains unicast masters on the port

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpPortIndex fsPtpUnicastMasterNetworkProtocol fsPtpUnicastMasterAddLength fsPtpUnicastMasterAddr

Column	Syntax	OID
fsPtpUnicastMasterNetworkProtocol This indicates the network protocol of the port of the unicast master on this port	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.12.1.1.1
fsPtpUnicastMasterAddLength This indicates the length of fsptpUnicastMasterAddr	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.12.1.1.2
fsPtpUnicastMasterAddr This indicates the protocol address of the port of the unicast master on this port	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.12.1.1.3
fsPtpUnicastMasterRowStatus This indicates the status of this entry, is valid or not.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.12.1.1.4

Table contains acceptable masters for the clock

fsPtpAccMasterDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.13.1.1

Contains acceptable masters for the clock

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpAccMasterNetworkProtocol fsPtpAccMasterAddLength fsPtpAccMasterAddr

Column	Syntax	OID
fsPtpAccMasterNetworkProtocol This indicates the network protocol of the port of the acceptable master of the clock	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.13.1.1.1
fsPtpAccMasterAddLength This indicates the length of fsptpAccMasterAddr	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.13.1.1.2
fsPtpAccMasterAddr This indicates the protocol address of the port of the acceptable master of the clock	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.45.1.13.1.1.3
fsPtpAccMasterAlternatePriority If this value is non zero then priority1 of the clock set will be replaced by this priority for the best master algorithm.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.13.1.1.4
fsPtpAccMasterRowStatus This indicates the status of this entry, is valid or not.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.13.1.1.5

Table contains list of security keys
          
Currently this table is not supported.
This table will be supported in the future

fsPtpSecKeyDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.14.1.1

contains list of security keys

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpSecKeyId

Column	Syntax	OID
fsPtpSecKeyId This is the unique identifier of the security key	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.1
fsPtpSecKeyAlgorithmId This indicates the algorithm to be used with the security key	Enumerationr/w Enumerated Values: 1 hmacSha196 2 hmacSha256128	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.2
fsPtpSecKeyLength This indicates the length of fsptpSecKey	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.3
fsPtpSecKey This field holds the security key	OctetStringr/w	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.4
fsPtpSecKeyStartTime This indicates validity start time of the key in secs. This key will be activated by setting the fsptpSecKeyValid to TRUE	SNMPv2-TCTimeStampr/w Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.5
fsPtpSecKeyExpirationTime This indicates expiry time of the key in seconds. Once the key expires then the fsptpSecKeyValid is set to FALSE	SNMPv2-TCTimeStampr/w Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.6
fsPtpSecKeyValid This indicates whether the security key is valid or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.7
fsPtpSecKeyRowStatus This indicates whether the security key is valid or not	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.14.1.1.8

Table contains list of incoming and outgoing SAs,
The value of the objects can not be modified if it
is dynamically learned SAs though the object is read-write
          
Currently this table is not supported.
This table will be supported in the future

fsPtpSADataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.15.1.1

Contains list of incoming and outgoing SAs

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpSAId

Column	Syntax	OID
fsPtpSAId This is the unique ID of SA.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.1
fsPtpSASrcPortNumber This indicates the port Number of the source port Identity of the SA. The fsPtpSARowStatus should be in not in service if it has to be modified. For outgoing SA this can be set to all-ones indicates that the SA is use…	FsPtpPortNumberr/w	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.2
fsPtpSASrcAddrLength This indicates the length of fsptpSASrcAddr. The fsPtpSARowStatus should be in not in service if it has to be modified.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.3
fsPtpSASrcAddr This indicates the protocol address of the source port of the SA. The fsPtpSARowStatus should be in not in service if it has to be modified.for outgoing SA this can be set to all-ones indicates the SA matches all addre…	OctetStringr/w	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.4
fsPtpSADstPortNumber This indicates the port number of the destination port of the SA. The fsPtpSARowStatus should be in not in service if it has to be modified. For outgoing SA this value can be set to all-ones indicating that the SA is …	FsPtpPortNumberr/w	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.5
fsPtpSADstAddrLength This indicates the length of the fsptpSADstAddr. The fsPtpSARowStatus should be in not in service if it has to be modified.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.6
fsPtpSADstAddr This indicates the protocol address of the destination port of the SA. The fsPtpSARowStatus should be in not in service if it has to be modified. For outgoing SA this can be set to all-ones indicating that the SA is for…	OctetStringr/w	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.7
fsPtpSASrcClockIdentity This indicates the clock identity of the source port of the SA The fsPtpSARowStatus should be in not in service if it has to be modified.For outgoing SA this can be set to all-ones indicates that the SA is used for al…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.8
fsPtpSADstClockIdentity This indicates the clock identity of the destination port of the SA. The fsPtpSARowStatus should be in not in service if it has to be modified. For outgoing SA this can be set to all-ones indicating that the SA is for …	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.9
fsPtpSAReplayCounter This is the replay counter. This value is used in the replay protection mechanism.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.10
fsPtpSALifeTimeId This is the life time Id, This value is used in the replay protection mechanism.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.11
fsPtpSAKeyId This indicates which key is used for computation of the ICV . The value can not be assigned to this variable if it is a incoming SA	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.12
fsPtpSANextLifeTimeId This is the next life time Id used in replay protection mechanism. when fsptpSAReplayCounter rolls over the value of fsptpSANextLifeTimeId is copied to fsptpSALifeTimeId.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.13
fsPtpSANextKeyId This indicates the key that is going to be used after this key expires. The value can not be assigned to this variable if it is a incoming SA	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.14
fsPtpSATrustState This indicates the trust state of the incoming SA. For out going SA this is not used.	Enumeration Enumerated Values: 0 untrusted 1 trusted	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.15
fsPtpSATrustTimer This indicates the trust timer of incoming SA. when it receives successfully authenticated message this value is set to fsptpSATrustTimeout. This is decremented by one by each security event task, when it reaches zero …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.16
fsPtpSATrustTimeout This indicates the time out period for the authenticated messages in SA. If it is not recieved successfully authenticated message within this period the incoming SA will be timed out. For outgoing SA this is …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.17
fsPtpSAChallengeState This indicates whether the SA is waiting for a reply for a challenge request	Enumeration Enumerated Values: 0 idle 1 challenging	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.18
fsPtpSAChallengeTimer This indicates the challenge timer of incoming SA this value is set to fsptpSAChallengeTimeOut once a challenge-request or challenge-response-request is sent by the SA. This timer is decremented by one by each secur…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.19
fsPtpSAChallengeTimeOut This is the time out period for the challenge-request, or challenge-response-request message. if challenge-request or challenge-response-request is not received within this period then the fsptpSAChallengeState is set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.20
fsPtpSARequestNonce This is the request nonce used in challenge-response mechanism	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.21
fsPtpSAResponseNonce This is the request nonce received in the challenge request and maintained in the SA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.22
fsPtpSAChallengeRequired This value is set to TRUE when a challenge request needs to be sent to update incoming security association	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.23
fsPtpSAResponseRequired This value is set to TRUE when a challenge response needs to be sent	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.24
fsPtpSATypeField This indicates whether the SA is static or dynamic	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.25
fsPtpSADirection This indicates the SA's direction, whether incoming SA or outgoing SA	Enumerationr/w Enumerated Values: 0 in 1 out	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.26
fsPtpSARowStatus RowStatus for creating the entries into this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.15.1.1.27

Table contains list of Alternate timescal keyId and it's parameters. 
It is applicabel for Grandmaster Clock.

fsPtpAltTimeScaleDataSetEntry row .1.3.6.1.4.1.10876.101.2.45.1.16.1.1

contains list of Alternate timescal Entries

Indexes

fsPtpContextId fsPtpDomainNumber fsPtpAltTimeScaleKeyId

Column	Syntax	OID
fsPtpAltTimeScaleKeyId This is the unique identifier of the Alternate Timescale KeyId	Integer32 Constraints: range: 1-254	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.1
fsPtpAltTimeScalecurrentOffset The value of currentOffset shall be the offset of the alternate time, in seconds, from the node's time. The alternate time is the sum of this value and the node's time.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.2
fsPtpAltTimeScalejumpSeconds The value of jumpSeconds shall be the size of the next discontinuity, in seconds, of the alternate time. A value of zero indicates that no discontinuity is expected. A positive value indicates that the discontinuity …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.3
fsPtpAltTimeScaletimeOfNextJump The value of timeOfNextJump shall be the value of the seconds portion of the transmitting node's time at the time that the next discontinuity will occur. The discontinuity occurs at the start of the second indicated …	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.4
fsPtpAltTimeScaledisplayName The value of displayName shall be the text name of the alternate timescale. Commonly used acronyms should be used, e.g., NTP, PT,PST, PDT for Network Time Protocol, Pacific Time, Pacific Standard Time, and Pacific Dayl…	OctetStringr/w Constraints: range: 1-10	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.5
fsPtpAltTimeScaleRowStatus This indicates whether the security key is valid or not	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.45.1.16.1.1.6