fsPtpCurrentMasterToSlaveDelay

SUPERMICRO-PTP-MIB · .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.4
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
This attribute is the propagation time for a sync message
travelling between master to slave clocks
              
The time interval field represents the values in scalednanoseconds.
The scalednanoseconds member is the time interval expressed in
units of nanoseconds and multiplied by 2^16.
Positive or negative time intervals outside the maximum range of
this data type shall be encoded as the largest positive and
negative values of this data type, respectively. For example, 2.5 
nanoseconds, will be expressed as 2.5 * 2^16 and the value
converted to hexadecimal that will obviously evolve to
0000 0000 0002 8000 base 16.

Context

MIB
SUPERMICRO-PTP-MIB
OID
.1.3.6.1.4.1.10876.101.2.45.1.4.1.1.4
Type
column
Access
readonly
Status
current
Parent
fsPtpCurrentDataSetEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-PTP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-PTP-MIB::fsPtpCurrentMasterToSlaveDelay'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-PTP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-PTP-MIB::fsPtpCurrentMasterToSlaveDelay.<index>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-PTP-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-PTP-MIB::fsPtpCurrentMasterToSlaveDelay'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255