SUPERMICRO-MPLS-RSVP-TE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
78

fsMplsRsvpTeIfTable

table
.1.3.6.1.4.1.10876.101.1.13.2.1.1 · 1 row entry · 24 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMplsRsvpTeIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MPLS-RSVP-TE-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPLS-RSVP-TE-MIB::fsMplsRsvpTeIfTable' 
The MPLS-specific attributes of  the  system's
interfaces, over which RSVP Signalling protocol
is used for LSP Tunnel establishments.
          
For Practical purposes this table augments the 
'rsvpIfTable' of the standard RSVP, Though 
a separate index is defined for this table.
The value of fsMplsRsvpTeIfIndex will map
to the ifIndex of the rsvpIfTable.
          
A row in rsvpIfTable needs to be created first.
Before the row status of the entry being made
active, the required elements associaed with 
the interface must be set via this table.
          
If an interface is of the ATM Type, then the 
label range type is per-interface and the label 
range value is specified within the entry
of this table. If an interface is of Ethernet type,
the label range is per-platform based and the
label range is the common generic label range.
fsMplsRsvpTeIfEntry row .1.3.6.1.4.1.10876.101.1.13.2.1.1.1
The RSVP-specific attributes of a given interface.
Indexes
Column Syntax OID
fsMplsRsvpTeIfIndex
The interface index by which the row
in this table is identified. A row is
created in this table when a row is created
in the rsvpIfTable, and labelled traffic will
be handled over that interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.1
fsMplsRsvpTeIfLblSpace
Specifies the type of the interface, as Ethernet, or
ATM or FR
Enumerationr/w
Enumerated Values:
1perPlatform
2perInterface
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.2
fsMplsRsvpTeIfLblType
Specifies the type of the interface, as Ethernet, or
ATM or FR. Iface Type as FR is not supported
Enumerationr/w
Enumerated Values:
1rsvpTeIfEth
2rsvpTeIfAtm
3rsvpTeIfFr
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.3
fsMplsRsvpTeAtmMergeCap
Denotes the Merge Capability of this Interface.
VcMerge is currently not supported
Enumerationr/w
Enumerated Values:
0notSupported
2vcMerge
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.4
fsMplsRsvpTeAtmVcDirection
If the value of this object is 'biDirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.

If the value of this object is 'oddUniDirectional(1)',
a given VCI…
Enumerationr/w
Enumerated Values:
0biDirectional
1oddUniDirectional
2evenUniDirectional
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.5
fsMplsRsvpTeAtmMinVpi
The minimum VPI number configured for this range.
AtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.6
fsMplsRsvpTeAtmMinVci
The minimum VCI number configured for this range.
AtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.7
fsMplsRsvpTeAtmMaxVpi
The maximum VPI number configured for this range.
AtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.8
fsMplsRsvpTeAtmMaxVci
The maximum VCI number configured for this range.
AtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.9
fsMplsRsvpTeIfMtu
The MTU value associated with this interface .
Integer32r/w
Constraints:
range: 1500-4096
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.10
fsMplsRsvpTeIfUdpNbrs
The number of neighbors perceived to be using
only the RSVP UDP Encapsulation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.11
fsMplsRsvpTeIfIpNbrs
The number of neighbors perceived to be using
only the RSVP IP Encapsulation.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.12
fsMplsRsvpTeIfNbrs
The number of neighbors currently perceived;
this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the
number of neighbors using both encapsulations.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.13
fsMplsRsvpTeIfRefreshMultiple
The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged out.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.14
fsMplsRsvpTeIfTTL
The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.15
fsMplsRsvpTeIfRefreshInterval
The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface.
SNMPv2-TCTimeIntervalr/w
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.16
fsMplsRsvpTeIfRouteDelay
The approximate period from the time a route
is changed to the time a resulting message appears on the interface.
SNMPv2-TCTimeIntervalr/w
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.17
fsMplsRsvpTeIfUdpRequired
If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if fsMplsRsvpTeI-
fUdpNbrs is not zero.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.18
fsMplsRsvpTeIfHelloSupported
Indicates whether the interface supports Hello message or not.
When set to 'true' the interface is set to support Hello message.
The interface will not be set to support Hello message, if this
object has a value 'false'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.19
fsMplsRsvpTeIfLinkAttr
Link Attributes associated with the interface as defined in
section 4.7.4 of RFC 3209, Extensions to RSVP for LSP Tunnels,
Awduche et al, December 2001.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.20
fsMplsRsvpTeIfStatus
'active' on interfaces that are configured for RSVP.
CreateAndGo is not supported
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.21
fsMplsRsvpTeIfPlrId
Indicates the PLR Id to be configured for this interface
for supporting FRR Feature.
MplsLsrIdentifierr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.22
fsMplsRsvpTeIfAvoidNodeId
Indicates the IP Address of the Node to be avoided while
protecting this interface for supporting feature.
MplsLsrIdentifierr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.23
fsMplsRsvpTeIfStorageType
The storage type for this conceptual row in the fsMplsRsvpTeIfTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
only volatile and nonVolatile are allowed…
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.24

fsMplsRsvpTeIfStatsTable

table
.1.3.6.1.4.1.10876.101.1.13.2.1.2 · 1 row entry · 35 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMplsRsvpTeIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MPLS-RSVP-TE-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPLS-RSVP-TE-MIB::fsMplsRsvpTeIfStatsTable' 
This table contains the statistical information associated
with an interface.
fsMplsRsvpTeIfStatsEntry row .1.3.6.1.4.1.10876.101.1.13.2.1.2.1
This entry contains statistical information of an interface.
Indexes
No indexes recorded
Column Syntax OID
fsMplsRsvpTeIfNumTnls
This value specifies the number of tunnels established via
this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.1
fsMplsRsvpTeIfNumMsgSent
This value specifies the total number of messages sent on
this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.2
fsMplsRsvpTeIfNumMsgRcvd
This value specifies the total number of messages received
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.3
fsMplsRsvpTeIfNumHelloSent
This value specifies the total number of hello messages plus
hello ack messages sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.4
fsMplsRsvpTeIfNumHelloRcvd
This value specifies the total number of hello messages plus
hello ack messages received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.5
fsMplsRsvpTeIfNumPathErrSent
This value specifies the total number of Path Error messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.6
fsMplsRsvpTeIfNumPathErrRcvd
This value specifies the total number of Path Error messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.7
fsMplsRsvpTeIfNumPathTearSent
This value specifies the total number of Path Tear messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.8
fsMplsRsvpTeIfNumPathTearRcvd
This value specifies the total number of Path Tear messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.9
fsMplsRsvpTeIfNumResvErrSent
This value specifies the total number of Resv Error messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.10
fsMplsRsvpTeIfNumResvErrRcvd
This value specifies the total number of Resv Error messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.11
fsMplsRsvpTeIfNumResvTearSent
This value specifies the total number of Resv Tear messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.12
fsMplsRsvpTeIfNumResvTearRcvd
This value specifies the total number of Resv Tear messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.13
fsMplsRsvpTeIfNumResvConfSent
This value specifies the total number of Resv Conf messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.14
fsMplsRsvpTeIfNumResvConfRcvd
This value specifies the total number of Resv Conf messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.15
fsMplsRsvpTeIfNumBundleMsgSent
This value specifies the total number of Bundle messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.16
fsMplsRsvpTeIfNumBundleMsgRcvd
This value specifies the total number of Bundle messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.17
fsMplsRsvpTeIfNumSRefreshMsgSent
This value specifies the total number of S-Refresh messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.18
fsMplsRsvpTeIfNumSRefreshMsgRcvd
This value specifies the total number of S-Refresh messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.19
fsMplsRsvpTeIfNumPathSent
This value specifies the total number of Path messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.20
fsMplsRsvpTeIfNumPathRcvd
This value specifies the total number of Path messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.21
fsMplsRsvpTeIfNumResvSent
This value specifies the total number of Resv messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.22
fsMplsRsvpTeIfNumResvRcvd
This value specifies the total number of Resv messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.23
fsMplsRsvpTeIfNumNotifyMsgSent
This value specifies the total number of Notify messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.24
fsMplsRsvpTeIfNumNotifyMsgRcvd
This value specifies the total number of Notify messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.25
fsMplsRsvpTeIfNumRecoveryPathSent
This value specifies the total number of RecvoveryPath messages
sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.26
fsMplsRsvpTeIfNumRecoveryPathRcvd
This value specifies the total number of RecoveryPath messages
received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.27
fsMplsRsvpTeIfNumPathSentWithRecoveryLbl
This value specifies the total number of Path messages with
Recovery label object sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.28
fsMplsRsvpTeIfNumPathRcvdWithRecoveryLbl
This value specifies the total number of Path messages with
Recovery label object received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.29
fsMplsRsvpTeIfNumPathSentWithSuggestedLbl
This value specifies the total number of Path messages with
Suggested label object sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.30
fsMplsRsvpTeIfNumPathRcvdWithSuggestedLbl
This value specifies the total number of Path messages with
Suggested label object received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.31
fsMplsRsvpTeIfNumHelloSentWithRestartCap
This value specifies the total number of Hello messages with
Restart_Cap object sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.32
fsMplsRsvpTeIfNumHelloRcvdWithRestartCap
This value specifies the total number of Hello messages with
Restart_Cap object received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.33
fsMplsRsvpTeIfNumHelloSentWithCapability
This value specifies the total number of Hello messages with
Capability object sent on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.34
fsMplsRsvpTeIfNumHelloRcvdWithCapability
This value specifies the total number of Hello messages with
capability object received on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.2.1.35

fsMplsRsvpTeNbrTable

table
.1.3.6.1.4.1.10876.101.1.13.2.1.3 · 1 row entry · 19 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMplsRsvpTeNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MPLS-RSVP-TE-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPLS-RSVP-TE-MIB::fsMplsRsvpTeNbrTable' 
This table contains information about RsvpTe Neighbours
known to this node.
fsMplsRsvpTeNbrEntry row .1.3.6.1.4.1.10876.101.1.13.2.1.3.1
This entry contains information about a single neighbour.
Indexes
Column Syntax OID
fsMplsRsvpTeNbrIfAddr
This value specifies the Ip address of the neighbour.
This can be router id of the neighbour or address of the
interface to which this node is connected.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.1
fsMplsRsvpTeNbrRRCapable
This value specifies the RR behaviour of the node towards it's
neighbour.
Can be enabled only when fsMplsRsvpTeRRCapable is enabled. When
enabled it means bundling can take place for messages going
to the neighbour.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.2
fsMplsRsvpTeNbrRRState
This value specifies the actual RR behaviour that is currently
being applied to the neighbour.
Can be enabled only when fsMplsRsvpTeNbrRRCapable is enabled.
Value enabled implies that, bundling/RR techniques will be use…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.3
fsMplsRsvpTeNbrRMDCapable
This value specifies whether Reliable Message Delivery is to
be performed for messages going to the neighbour.
Can be enabled only when fsMplsRsvpTeMsgIdCapable is enabled.
When enabled it means that, message id will be…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.4
fsMplsRsvpTeNbrEncapsType
This value specifies the Type of Encapsulation Supported by
the neighbour.
Enumerationr/w
Enumerated Values:
1ipencap
2udpencap
3both
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.5
fsMplsRsvpTeNbrHelloSupport
This value specifies whether Hello mechanism is supported for
this neighbour or not.
Can be enabled only when fsMplsRsvpTeHelloSupprtd is true.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.6
fsMplsRsvpTeNbrHelloState
This value specifies the Hello State for the neighbour.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
Enumeration
Enumerated Values:
0unknown
1supported
2notSupported
3supportReset
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.7
fsMplsRsvpTeNbrHelloRelation
This value specifies the Hello relation between the two
neighbours.
Active implies that this node will send hello messages.
Passive implies that this node will wait for hello messages
and on receipt of it will send hell…
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.8
fsMplsRsvpTeNbrSrcInstInfo
This value specifies the source instance value of the hello
being exchanged between the neighbours.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.9
fsMplsRsvpTeNbrDestInstInfo
This value specifies the destination instance value of the
hello being exchanged between the neighbours.
Is valid only when fsMplsRsvpTeNbrHelloSupport is enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.10
fsMplsRsvpTeNbrCreationTime
This value specifies the time when the neighbour was created.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.11
fsMplsRsvpTeNbrLclRprDetectionTime
This value specifies the time when a local repair was detected
using Hello Message exchange mechanism
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.12
fsMplsRsvpTeNbrNumTunnels
This value specifies the number of tunnels that pass via this
neighbour.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.13
fsMplsRsvpTeNbrStatus
This value specifies the Status of the Row. Is used to create,
modify and/or delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.14
fsMplsRsvpTeNbrGrRecoveryPathCapability
This object indicates whether the neighbor supports
RecoveryPath message capability.
R bit indicates that the node desire to receive the
RecoveryPath message. T bit indicates that the node desire to
send the RecoveryPa…
Bits
Enumerated Values:
0recoveryPathTransmit
1recoveryPathReceive
2recoveryPathSRefresh
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.15
fsMplsRsvpTeNbrGrRestartTime
This value specifies the he restart time interval for the Graceful
restart of the neighbor node in seconds
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.16
fsMplsRsvpTeNbrGrRecoveryTime
This value specifies the recovery time interval for the Graceful
resatart of the neighbor node, after restart in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.17
fsMplsRsvpTeNbrGrProgressStatus
This object denotes the current State of the neighbor's GR Progress.
Following are the different State of neighbor's GR Progress.
1. Not started.
2. Restart in progress.
3. Aborted.
4. Recovery in progress.
5. Completed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.18
fsMplsRsvpTeNbrStorageType
The storage type for this conceptual row in the fsMplsRsvpTeNbrTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
only volatile and nonVolatile are allowe…
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.10876.101.1.13.2.1.3.1.19