RPHY-NDF-NDR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
30

docsRphyRpdDevNdfCfgTable

table
.1.3.6.1.4.1.9.9.857.1.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk docsRphyRpdDevNdfCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPHY-NDF-NDR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPHY-NDF-NDR-MIB::docsRphyRpdDevNdfCfgTable' 
This table provides OOB NDF channel's status and configuration
information, for example channel frequency, width, poweradjust,
admin status etc. This table also allows to enable or disable
the NDF channel's admin status.
docsRphyRpdDevNdfCfgEntry row .1.3.6.1.4.1.9.9.857.1.1.1
Each entry contains status and configuration information for a
single NDF Channel.
Indexes
Column Syntax OID
docsRphyRpdDevNdfUniqueId
This key attribute specifies a globally unique 6-byte
identifier for the RPD. By convention, an RPD SHOULD use the MAC
address of the lowest numbered Ethernet port facing the CIN.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.857.1.1.1.1
docsRphyRpdDevNdfRfPort
This key attribute reports the RPD RF port number carrying this
NDF channel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.1.1.2
docsRphyRpdDevNdfRfChannel
This key attribute reports the NDF channel number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.1.1.3
docsRphyRpdDevNdfEnable
This attribute indicates whether the NDF stream is enabled or
disabled. Also, using this attribute NDF stream can be enabled
or disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.857.1.1.1.4
docsRphyRpdDevNdfDstIPAddr
This attribute reports the Group IP address of the RPD
multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::)
then the NDF stream is a unicast NDF stream.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.857.1.1.1.5
docsRphyRpdDevNdfSrcIPAddr
This attribute reports the IP address of the transmitter of the
L2TP stream.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.857.1.1.1.6
docsRphyRpdDevNdfSessionId
This attribute reports the L2TP session ID of the NDF stream.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.1.1.7
docsRphyRpdDevNdfFrequency
This attribute reports the center frequency of the NDF
channel.
HertzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.1.1.8
docsRphyRpdDevNdfBandwidth
This attribute reports the bandwidth of the NDF channel.
Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 :
160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 :
1280000Hz, Mode 5 : 2560000Hz, Mode 6 : …
HertzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.1.1.9
docsRphyRpdDevNdfPowerAdjust
This attribute specifies power level adjustment for the NDF
channel relative to the base power level configured for the DS
RF port.
TenthdBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.857.1.1.1.10
docsRphyRpdDevNdfRfMute
This attribute reports the current state of the RF output of
the NDF channel. When Rf-mute is set to TRUE, the output RF
signal is off. Similarly, when Rf-mute is set to FALSE, the
output RF signal is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.857.1.1.1.11
docsRphyRpdDevNdfIsUnicast
This attribute indicates whether the NDF stream is unicast or
multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the
NDF stream is a unicast NDF stream.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.857.1.1.1.12
docsRphyRpdDevNdfRpdStatus
This attribute reports the string describing the current status
of the RPD i.e 'Online' or 'Offline'. For config modify to take
effect, the RPD status shoud be 'Online'.
OctetString .1.3.6.1.4.1.9.9.857.1.1.1.13
docsRphyRpdDevNdfRpdInPktCount
This attribute reports the number of packets received by the
RPD on a given NDF stream. RPD status should be 'Online' to get
the actual input packets count.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.857.1.1.1.14
docsRphyRpdDevNdfRpdOutPktCount
This attribute reports the number of packets transmitted by the
RPD. RPD status should be 'Online' to get the actual output
packets count.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.857.1.1.1.15

docsRphyRpdDevNdrCfgTable

table
.1.3.6.1.4.1.9.9.857.1.2 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk docsRphyRpdDevNdrCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RPHY-NDF-NDR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RPHY-NDF-NDR-MIB::docsRphyRpdDevNdrCfgTable' 
This table provides OOB NDR channel's status and configuration
information, for example channel frequency, width, poweradjust,
admin status etc. This table also allows to enable or disable
the NDR channel's admin status.
docsRphyRpdDevNdrCfgEntry row .1.3.6.1.4.1.9.9.857.1.2.1
Each entry contains status and configuration information for a
single NDR Channel.
Indexes
Column Syntax OID
docsRphyRpdDevNdrUniqueId
This key attribute specifies a globally unique 6-byte
identifier for the RPD. By convention, an RPD SHOULD use the MAC
address of the lowest numbered Ethernet port facing the CIN.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.857.1.2.1.1
docsRphyRpdDevNdrRfPort
This key attribute reports the RPD RF port number
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.2
docsRphyRpdDevNdrRfChannel
This key attribute reports the NDR channel number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.3
docsRphyRpdDevNdrEnable
This attribute indicates whether the NDR stream is enabled or
disabled. Also, using this attribute NDR stream can be enabled
or disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.857.1.2.1.4
docsRphyRpdDevNdrDstIPAddr
This attribute reports the IP address of the receiver of the
NDR L2TP stream.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.857.1.2.1.5
docsRphyRpdDevNdrSrcIPAddr
This attribute reports the IP address of the RPD transmitting
the L2TP stream.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.857.1.2.1.6
docsRphyRpdDevNdrSessionId
This attribute reports the L2TP session ID of the NDR stream.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.7
docsRphyRpdDevNdrFrequency
This attribute reports the center frequency of the NDR
channel.
HertzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.8
docsRphyRpdDevNdrBandwidth
This attribute reports the bandwidth of the NDR channel.Channel
widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 :
160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 :
1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5…
HertzSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.9
docsRphyRpdDevNdrMtuSize
This attribute reports the Maximum Transmission Unit or maximum
packet size for the L2TP stream.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.10
docsRphyRpdDevNdrPhb
This attribute reports the DSCP QOS value configured for a L2TP
packets. Default PHB is 0x0 means Best-Effort packet delivery.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.857.1.2.1.11
docsRphyRpdDevNdrPowerAdjust
This attribute represents the desired target receive power
level adjust for the selected NDR channel from the base target
power reference level specified for the corresponding US RF
port. The value represents power spec…
TenthdBmVSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.857.1.2.1.12
docsRphyRpdDevNdrRpdStatus
This attribute reports the string describing the current status
of the RPD i.e 'Online' or 'Offline'. For config modify to take
effect, the RPD status shoud be 'Online'.
OctetString .1.3.6.1.4.1.9.9.857.1.2.1.13
docsRphyRpdDevNdrRpdInPktCount
This attribute reports the number of packets received by the
RPD on a given NDR stream. RPD status should be 'Online' to get
the actual input packets count.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.857.1.2.1.14
docsRphyRpdDevNdrRpdOutPktCount
This attribute reports the number of packets transmitted by the
RPD. RPD status should be 'Online' to get the actual output
packets count.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.857.1.2.1.15