docsRphyRpdDevNdrRfChannel
RPHY-NDF-NDR-MIB ·
.1.3.6.1.4.1.9.9.857.1.2.1.3
Object
column
SNMPv2-SMIUnsigned32
This key attribute reports the NDR channel number.
Context
- MIB
- RPHY-NDF-NDR-MIB
- OID
.1.3.6.1.4.1.9.9.857.1.2.1.3- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- docsRphyRpdDevNdrCfgEntry
- Table
- docsRphyRpdDevNdrCfgTable
- Siblings
- 14
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsRphyRpdDevNdrUniqueId This key attribute specifies a globally unique 6-byte
identifier for the RPD. By convention, an RPD SHOULD use the MAC
address of the lowest numbered Ethernet port facing the CIN. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.857.1.2.1.1 |
| docsRphyRpdDevNdrMtuSize This attribute reports the Maximum Transmission Unit or maximum
packet size for the L2TP stream. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.10 |
| docsRphyRpdDevNdrPhb This attribute reports the DSCP QOS value configured for a L2TP
packets. Default PHB is 0x0 means Best-Effort packet delivery. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.11 |
| docsRphyRpdDevNdrPowerAdjust This attribute represents the desired target receive power
level adjust for the selected NDR channel from the base target
power reference level specified for the corresponding US … | column | TenthdBmV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.857.1.2.1.12 |
| docsRphyRpdDevNdrRpdStatus This attribute reports the string describing the current status
of the RPD i.e 'Online' or 'Offline'. For config modify to take
effect, the RPD status shoud be 'Online'. | column | OctetString | .1.3.6.1.4.1.9.9.857.1.2.1.13 |
| docsRphyRpdDevNdrRpdInPktCount This attribute reports the number of packets received by the
RPD on a given NDR stream. RPD status should be 'Online' to get
the actual input packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.857.1.2.1.14 |
| docsRphyRpdDevNdrRpdOutPktCount This attribute reports the number of packets transmitted by the
RPD. RPD status should be 'Online' to get the actual output
packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.857.1.2.1.15 |
| docsRphyRpdDevNdrRfPort This key attribute reports the RPD RF port number | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.2 |
| docsRphyRpdDevNdrEnable This attribute indicates whether the NDR stream is enabled or
disabled. Also, using this attribute NDR stream can be enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.857.1.2.1.4 |
| docsRphyRpdDevNdrDstIPAddr This attribute reports the IP address of the receiver of the
NDR L2TP stream. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.857.1.2.1.5 |
| docsRphyRpdDevNdrSrcIPAddr This attribute reports the IP address of the RPD transmitting
the L2TP stream. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.857.1.2.1.6 |
| docsRphyRpdDevNdrSessionId This attribute reports the L2TP session ID of the NDR stream. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.7 |
| docsRphyRpdDevNdrFrequency This attribute reports the center frequency of the NDR
channel. | column | Hertz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.8 |
| docsRphyRpdDevNdrBandwidth This attribute reports the bandwidth of the NDR channel.Channel
widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 :
160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 :
1… | column | Hertz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.2.1.9 |