docsRphyRpdDevNdfUniqueId
RPHY-NDF-NDR-MIB ·
.1.3.6.1.4.1.9.9.857.1.1.1.1
Object
column
SNMPv2-TCMacAddress
This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN.
Context
- MIB
- RPHY-NDF-NDR-MIB
- OID
.1.3.6.1.4.1.9.9.857.1.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- docsRphyRpdDevNdfCfgEntry
- Table
- docsRphyRpdDevNdfCfgTable
- Siblings
- 14
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsRphyRpdDevNdfPowerAdjust This attribute specifies power level adjustment for the NDF
channel relative to the base power level configured for the DS
RF port. | column | TenthdB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.857.1.1.1.10 |
| docsRphyRpdDevNdfRfMute This attribute reports the current state of the RF output of
the NDF channel. When Rf-mute is set to TRUE, the output RF
signal is off. Similarly, when Rf-mute is set to FALSE, th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.857.1.1.1.11 |
| docsRphyRpdDevNdfIsUnicast This attribute indicates whether the NDF stream is unicast or
multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the
NDF stream is a unicast NDF stream. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.857.1.1.1.12 |
| docsRphyRpdDevNdfRpdStatus This attribute reports the string describing the current status
of the RPD i.e 'Online' or 'Offline'. For config modify to take
effect, the RPD status shoud be 'Online'. | column | OctetString | .1.3.6.1.4.1.9.9.857.1.1.1.13 |
| docsRphyRpdDevNdfRpdInPktCount This attribute reports the number of packets received by the
RPD on a given NDF stream. RPD status should be 'Online' to get
the actual input packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.857.1.1.1.14 |
| docsRphyRpdDevNdfRpdOutPktCount This attribute reports the number of packets transmitted by the
RPD. RPD status should be 'Online' to get the actual output
packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.857.1.1.1.15 |
| docsRphyRpdDevNdfRfPort This key attribute reports the RPD RF port number carrying this
NDF channel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.1.1.2 |
| docsRphyRpdDevNdfRfChannel This key attribute reports the NDF channel number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.1.1.3 |
| docsRphyRpdDevNdfEnable This attribute indicates whether the NDF stream is enabled or
disabled. Also, using this attribute NDF stream can be enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.857.1.1.1.4 |
| docsRphyRpdDevNdfDstIPAddr This attribute reports the Group IP address of the RPD
multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::)
then the NDF stream is a unicast NDF stream. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.857.1.1.1.5 |
| docsRphyRpdDevNdfSrcIPAddr This attribute reports the IP address of the transmitter of the
L2TP stream. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.857.1.1.1.6 |
| docsRphyRpdDevNdfSessionId This attribute reports the L2TP session ID of the NDF stream. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.1.1.7 |
| docsRphyRpdDevNdfFrequency This attribute reports the center frequency of the NDF
channel. | column | Hertz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.1.1.8 |
| docsRphyRpdDevNdfBandwidth This attribute reports the bandwidth of the NDF channel.
Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 :
160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 :
… | column | Hertz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.857.1.1.1.9 |