RC-OPM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
104

rcOpmCardConfigTable

table
.1.3.6.1.4.1.2272.1.36.1 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcOpmCardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcOpmCardConfigTable' 
Opm Card Config Table
rcOpmCardConfigEntry row .1.3.6.1.4.1.2272.1.36.1.1
Entry containing infomation of OPM Card Config.
Indexes
Column Syntax OID
rcOpmCardConfigSlotIndex
slot Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.36.1.1.1
rcOpmCardConfigAction
 Enumerationr/w
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.2272.1.36.1.1.2
rcOpmCardConfigTraceMode
 Enumerationr/w
Enumerated Values:
0other
1traceOn
 .1.3.6.1.4.1.2272.1.36.1.1.3
rcOpmCardConfigImageFileName
OPM Image file name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.36.1.1.4

rcOpmPortTable

table
.1.3.6.1.4.1.2272.1.36.2 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcOpmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcOpmPortTable' 
Opm Port table
rcOpmPortEntry row .1.3.6.1.4.1.2272.1.36.2.1
Entry containing info. for a particular opm port
Indexes
Column Syntax OID
rcOpmPortIndex
An index value that uniquely identifies a opm port.
This value is similar to ifIndex in MIB2.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.36.2.1.1
rcOpmPortServiceType
Opm Port service type
Enumeration
Enumerated Values:
1rbsRingPrimary
2rbsRingSecondary
3standaloneRbs
4localTlsTransparent
5localTlsSwitched
6localIpmcUni
7localIpmcBi
8localQnq1
9localQnq2
10server
11unknown
12multiService
 .1.3.6.1.4.1.2272.1.36.2.1.2
rcOpmPortUniNum
Number of UNI this port belongs to
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.36.2.1.3
rcOpmPortServerEnable
Value indicating whether the OPM port set as a server port
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.36.2.1.4
rcOpmPortEgressCosProfileName
Egress COS Profile Table Name
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.36.2.1.5
rcOpmPortEgressPolicerAdminState
Enable/disable to use Egress Cos Profile table
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.36.2.1.6

rcVpnTable

table
.1.3.6.1.4.1.2272.1.37.1 · 1 row entry · 24 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcVpnTable'
rcVpnEntry row .1.3.6.1.4.1.2272.1.37.1.1
A Vpn table entry.
Indexes
Column Syntax OID
rcVpnVpnId
Vpn identifier. For the Martini L2s this is the VCId.
Distributed in the VFEC to the remote peer (other end
point of ).
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.37.1.1.1
rcVpnMemberId
This field along with the Id identifies an end point
of a Virtural circuit. In the martini point-to-point
this is PortID, where as in any2any this is
UNI ID.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.2
rcVpnName
For ease of configuration. Can provide either during
the configuration or modification of this field is
allowed on when the admin state is disabled. Not
supoorted in this release.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.2272.1.37.1.1.3
rcVpnPort
Providing member.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.37.1.1.4
rcVpnQtagNumOrRange
List of qtags or range of qtags for this port.
( member)
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.37.1.1.5
rcVpnLocalSwitch
indicate the local switch.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.37.1.1.6
rcVpnRemotePeerId
Remote LER IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.37.1.1.7
rcVpnTunnelGrpId
Tunnel group for this to reach remote LER.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.8
rcVpnOutBoundLowerBwReq
This is part of required parameter to enable the
admin status. Specifies the lower guaranteed
bandwidth in Mbps.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.37.1.1.9
rcVpnOutBoundUpperBwReq
This is part of required parameter to enable the
admin status. Specifies the upper bandwidth in Mbps.
Interpretation of this is based on the ServicType.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.37.1.1.10
rcVpnServiceType
Type of service offered for the .
Enumerationr/w
Enumerated Values:
1serviceA
2serviceB
3serviceC
 .1.3.6.1.4.1.2272.1.37.1.1.11
rcVpnServiceDegrationFactor
This value indicates the service degradation factor
(percent) either in the case of LSP failure or when
bandwidth requirement changes.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.37.1.1.12
rcVpnTunnelExpPolicyType
This indicates how the Tunnel EXP bits will be defined.
Value of this field specify the interpretation of
TunnelExpPolicy value.
Enumerationr/w
Enumerated Values:
1explicit
2implicit
 .1.3.6.1.4.1.2272.1.37.1.1.13
rcVpnTunnelExpPolicy
The usage of this field is signaled by
TunnelExpPolicyType. If the type is set to Explicit
then the value specified is the EXP bit value. Otherwise
the index for the mapping policy entry in the
TunnelExpPolicyTable.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.14
rcVpnVcGrpId
Configuration of VcGroupId has local Significance.
it is sent in the VFEC. Used for sending the wildcard
withdraw message to all the LDP neighbors. One
application is sending the withdraw message in the
event of the i…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.37.1.1.15
rcVpnVcLabel
This will be updated upon receiving the VFEC from the
remote peer. It is 20 bits long
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.16
rcVpnTunnelLspId
Will be updated when Vpn Controller determines which Lsp
it is using for the Vpn (based on the bw requirements).
This will be updated upon detecting the existence of
tunnel to the remote peer. This occurs while sending…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.17
rcVpnAdminState
Use for configuration. Enable operation is allowed
only if the configuration of this entry contains
tunnel-group association, memeber information and SLA
attributes. Disable value indicates that the
configuration exi…
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.37.1.1.18
rcVpnOperState
Change of state occurs upon establishing the label
mapping i.e., sending the VFEC and receiving the VFEC
or changes in Tunnel existence or LDP session.
Enumeration
Enumerated Values:
1inactive
2waitLdpSess
3waitLsp
4waitPeerLbl
5operational
 .1.3.6.1.4.1.2272.1.37.1.1.19
rcVpnRowStatus
uses for controlling the creation and deletion of
this row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.37.1.1.20
rcVpnMemAction
Add/Remove member from VPN.
Enumerationr/w
Enumerated Values:
0none
1add
2remove
 .1.3.6.1.4.1.2272.1.37.1.1.21
rcVpnQtagNumListSize
The Size of qtags or range of qtags for this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.1.1.22
rcVpnClassInteropMode
Interoperability mode for a service class attached to
an L2-VPN.
Enumerationr/w
Enumerated Values:
1standard
2juniper
 .1.3.6.1.4.1.2272.1.37.1.1.23
rcVpnAssociatedPortIfndx
Extended Legacy port or MLTport member.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.37.1.1.24

rcVpnVcGrpIdTable

table
.1.3.6.1.4.1.2272.1.37.2 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVpnVcGrpIdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcVpnVcGrpIdTable'
rcVpnVcGrpIdEntry row .1.3.6.1.4.1.2272.1.37.2.1
A VcGrpId table entry.
Indexes
Column Syntax OID
rcVpnVcGrpIdIndex
VC Grp Identifier. In the VPN configuration this value
is used to tie the VPN to the VcGrp.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.37.2.1.1
rcVpnVcGrpIdAdminStatus
use for configuration.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.37.2.1.2
rcVpnVcGrpIdListSize
Used to indicate the number of VPNs that are associated
with this VcGrpId.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.37.2.1.3
rcVpnVcGrpIdList
Used to indicate the list of VPNs that are assiciated
with this VcGrpId.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.37.2.1.4

rcVpnStatisticsTable

table
.1.3.6.1.4.1.2272.1.37.3 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVpnStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcVpnStatisticsTable'
rcVpnStatisticsEntry row .1.3.6.1.4.1.2272.1.37.3.1
A Statistics table entry.
Indexes
Column Syntax OID
rcVpnStatisticsVpnId
Vpn identifier. For the Martini L2VPNs this is the VCId.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.37.3.1.1
rcVpnStatisticsAccessPacketCount
Used to indicate the number of packets received at the access port
for this VPN.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.2
rcVpnStatisticsAccessOctetCount
Used to indicate the number of octets received at the access port
for this VPN.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.3
rcVpnStatisticsAccessDroppedBIRobsolete
Used to indicate the number of packets dropped due to BIR
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.4
rcVpnStatisticsAccessDroppedCIR
Used to indicate the number of packets dropped due to CIR
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.5
rcVpnStatisticsTrunkPacketCount
Used to indicate the number of packets received at the trunk port
for this VPN label.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.6
rcVpnStatisticsTrunkOctetCount
Used to indicate the number of octets received at the trunk port
for this VPN label.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.7
rcVpnStatisticsTrunkErrorTTL
Used to indicate the TTL error count for this VPN label.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.8
rcVpnStatisticsTrunkErrorMTU
Used to indicate the MTU error count for this VPN label.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.9
rcVpnStatisticsAccessDroppedPIR
Used to indicate the number of packets dropped due to PIR
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.37.3.1.10

rcVpnPortTable

table
.1.3.6.1.4.1.2272.1.37.4 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVpnPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcVpnPortTable' 
vpn port table
rcVpnPortEntry row .1.3.6.1.4.1.2272.1.37.4.1
Entry containing info. for a particular port
Indexes
Column Syntax OID
rcVpnPortIndex
An unique index used to identify a particular port
in the system. this index is equal to the ifIndex of
the port.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.37.4.1.1
rcVpnPortServiceType
Indicates the port functionality. 12uni is used to
configure the port to be part of Martini service,
tls is used to configure the port to be part of
Any2Any VPN service and ip is used to perform the IP
routing and m…
Enumerationr/w
Enumerated Values:
0none
1l2uni
2vpls
3ip
4serverl2uni
 .1.3.6.1.4.1.2272.1.37.4.1.2
rcVpnPortMode
The octapid id of the mirrored port.
Enumerationr/w
Enumerated Values:
0none
1transparent
2switched
 .1.3.6.1.4.1.2272.1.37.4.1.3

rcOeAdmStatisticsTable

table
.1.3.6.1.4.1.2272.1.38.2 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcOeAdmStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcOeAdmStatisticsTable'
rcOeAdmStatisticsEntry row .1.3.6.1.4.1.2272.1.38.2.1
A Statistics table entry.
Indexes
Column Syntax OID
rcOeAdmStatsPortIndex
Port interface Index .
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.38.2.1.1
rcOeAdmStatsUnSupportedVersion
Used to indicate the number of Hellos received with
Bad OE-ADM protocol version number .
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.2.1.2
rcOeAdmStatsUnSupportedTlvType
Used to indicate the number of Hellos received with
bad TLV types.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.2.1.3
rcOeAdmStatsBadMsgLength
Used to indicate the number of Hellos received with
bad Hello message length .
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.2.1.4
rcOeAdmStatsBadTlvLength
Used to indicate the number of Hellos received with
Bad TLV Length.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.2.1.5
rcOeAdmStatsBadMsgType
Used to indicate the number of Hellos received
with Bad Hello message Length.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.2.1.6

rcOeAdmConnStatisticsTable

table
.1.3.6.1.4.1.2272.1.38.3 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcOeAdmConnStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcOeAdmConnStatisticsTable'
rcOeAdmConnStatisticsEntry row .1.3.6.1.4.1.2272.1.38.3.1
A Statistics table entry.
Indexes
Column Syntax OID
rcOeAdmConnStatsUniId
This field identifies the UNI-ID for the PE-Edge
device.It represents the customer site ID.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.38.3.1.1
rcOeAdmConnStatsTimerZTimeout
This counter indicates total number of 'Z' Timer
timetouts.This is an indication of the possible physical link
disconnect between PE-Edge device and a PE-Core device.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.3.1.2
rcOeAdmConnStatsHellos
This counter indicates total number of Hello PDUs
received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.38.3.1.3

rcTlsVpnConfigTable

table
.1.3.6.1.4.1.2272.1.39.1 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcTlsVpnConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcTlsVpnConfigTable'
rcTlsVpnConfigEntry row .1.3.6.1.4.1.2272.1.39.1.1
A TlsVpn config table entry. This table is used for configuring
TLS VPN.
Indexes
Column Syntax OID
rcTlsVpnConfigVpnId
Vpn identifier. For the TLS VPN this is the VCId.
Distributed in the TFEC to the remote peer (other end
point of ).
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.39.1.1.1
rcTlsVpnConfigTdi
Transparent domain identifier for TLS.
Integer32
Constraints:
range: 100-65535
 .1.3.6.1.4.1.2272.1.39.1.1.2
rcTlsVpnConfigName
For ease of configuration. Can provide either during
the configuration or modification of this field is
allowed on when the admin state is disabled. Not
supoorted in this release.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.39.1.1.3
rcTlsVpnConfigMode
The transmission mode for interworking with Hornet.
Enumeration
Enumerated Values:
1transparent
2mapped
 .1.3.6.1.4.1.2272.1.39.1.1.4
rcTlsVpnConfigRowStatus
Used for controlling the creation and deletion of
this row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.39.1.1.5

rcTlsVpnRemotePeerTable

table
.1.3.6.1.4.1.2272.1.39.2 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcTlsVpnRemotePeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcTlsVpnRemotePeerTable'
rcTlsVpnRemotePeerEntry row .1.3.6.1.4.1.2272.1.39.2.1
A TlsVpn remote peer table entry.
This table is used for configuring
TLS VPN remote peers.
Indexes
Column Syntax OID
rcTlsVpnRemotePeerVpnId
Vpn identifier. For the TLS VPN this is the VCId.
Distributed in the TFEC to the remote peer (other end
point of ).
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.39.2.1.1
rcTlsVpnRemotePeerRemotePeerId
Remote LER IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.39.2.1.2
rcTlsVpnRemotePeerTunnelGrpId
Tunnel group to reach remote LER.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.39.2.1.3
rcTlsVpnRemotePeerRowStatus
Used for controlling the creation and deletion of
this row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.39.2.1.4
rcTlsVpnRemotePeerTunnelId
Tunnel in the Tunnel group to be used to reach remote LER.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.39.2.1.5
rcTlsVpnRemotePeerTunnelType
Type of the Tunnel in the Tunnel group to be used to reach
remote LER. Includes primary and backup tunnel
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.39.2.1.6
rcTlsVpnRemotePeerLdpFec
LDP FEC to be used to reach remote LER.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.39.2.1.7

rcTlsVpnTable

table
.1.3.6.1.4.1.2272.1.39.3 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcTlsVpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcTlsVpnTable'
rcTlsVpnEntry row .1.3.6.1.4.1.2272.1.39.3.1
A TlsVpn table entry. This table is used for
displaying all the TLS VPN
members. When displaying, the number of table entries
could be more than configured entry number due to
dynamically added TLS VPN members.
Indexes
Column Syntax OID
rcTlsVpnVpnId
Vpn identifier. For the TLS VPN this is the VCId.
Distributed in the TFEC to the remote peer (other end
point of ).
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.1
rcTlsVpnMemberId
This field along with the Id identifies an end point
of a Virtural circuit. In TLS VPN, this is
UNI ID. For creating the TLS VPN, Tdi must be configured
and this memberId value is (0xea000000|Tdi).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.39.3.1.2
rcTlsVpnRemotePeerId
Remote LER IP address. 0.0.0.1 representing
the local peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.39.3.1.3
rcTlsVpnName
For ease of configuration. Can provide either during
the configuration or modification of this field is
allowed on when the admin state is disabled. Not
supoorted in this release.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.39.3.1.4
rcTlsVpnTdi
Transparent domain identifier for TLS.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.5
rcTlsVpnMode
The transmission mode for interworking with Hornet.
Enumeration
Enumerated Values:
1transparent
2mapped
 .1.3.6.1.4.1.2272.1.39.3.1.6
rcTlsVpnMemberType
UNI type of the TLS VPN entry.
Enumeration
Enumerated Values:
0multicast
1localUnicast
2remoteUnicast
 .1.3.6.1.4.1.2272.1.39.3.1.7
rcTlsVpnUniPortListSize
Size of the incoming (or member) Port list.
Valid only for multicast member type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.8
rcTlsVpnUniPortList
The list of incoming (or member) ports.
Valid only for multicast member type.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.39.3.1.9
rcTlsVpnUniMac
UNI MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.39.3.1.10
rcTlsVpnTunnelGrpId
Tunnel group to reach remote LER.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.11
rcTlsVpnVcGrpId
Is generated per UNI. Used for sending the wildcard
withdraw message to all the LDP neighbors. One
application is sending the withdraw message in the
event of the UNI interface is going down.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.39.3.1.12
rcTlsVpnVcLabel
This is the vc label either allocated locally in the
case of local peer, or received from the remote
peer.
It is 20 bits long
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.13
rcTlsVpnTunnelLspId
Will be updated when Vpn Controller determines which Lsp
it is using for the Vpn (based on the bw requirements).
This will be updated upon detecting the existence of
tunnel to the remote peer. This occurs while sending…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.14
rcTlsVpnAdminState
Not used by TLS yet.
RAPID-CITYEnableValue
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.39.3.1.15
rcTlsVpnOperState
Change of state occurs upon establishing the label
mapping i.e., sending the TFEC and receiving the TFEC
or changes in Tunnel existence or LDP session.
For local peer, i.e., remotePeerId = 0.0.0.1, only
inactive and ope…
Enumeration
Enumerated Values:
1inactive
2waitLdpSess
3waitLsp
4waitPeerLbl
5operational
 .1.3.6.1.4.1.2272.1.39.3.1.16
rcTlsVpnTlsFlags
TLS UNI flags.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.39.3.1.17
rcTlsVpnRowStatus
Used for controlling the creation and deletion of
this row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.39.3.1.18

rcTlsVpnAccessStatisticsTable

table
.1.3.6.1.4.1.2272.1.39.4 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcTlsVpnAccessStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcTlsVpnAccessStatisticsTable'
rcTlsVpnAccessStatisticsEntry row .1.3.6.1.4.1.2272.1.39.4.1
TLS VPN Access Statistics table entry.
Indexes
Column Syntax OID
rcTlsVpnAccessStatisticsTdi
TDI identifier. This uniquely identifies the VPN-ID.
i.e. VPN-ID and TDI have a one-to-one association.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.39.4.1.1
rcTlsVpnAccessStatisticsPort
Access Port identifier.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.39.4.1.2
rcTlsVpnAccessStatisticsUcastPacketCount
Used to collect the number of Unicast packets received
on this access port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.4.1.3
rcTlsVpnAccessStatisticsUcastOctetCount
Used to collect the number of Unicast octets received
on this access port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.4.1.4
rcTlsVpnAccessStatisticsMcastPacketCount
Used to collect the number of Multicast packets received
on this access port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.4.1.5
rcTlsVpnAccessStatisticsMcastOctetCount
Used to collect the number of Multicast octets received
on this access port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.4.1.6
rcTlsVpnAccessStatisticsClear
Used to clear statistics for TDI and Port
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.39.4.1.7

rcTlsVpnTrunkStatisticsTable

table
.1.3.6.1.4.1.2272.1.39.5 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcTlsVpnTrunkStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-OPM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-OPM-MIB::rcTlsVpnTrunkStatisticsTable'
rcTlsVpnTrunkStatisticsEntry row .1.3.6.1.4.1.2272.1.39.5.1
TLS VPN Trunk Statistics table entry.
Indexes
Column Syntax OID
rcTlsVpnTrunkStatisticsTdi
TDI identifier. This uniquely identifies the VPN-ID.
i.e. VPN-ID and TDI have a one-to-one association.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.39.5.1.1
rcTlsVpnTrunkStatisticsPort
Trunk Port identifier.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.39.5.1.2
rcTlsVpnTrunkStatisticsUcastPacketCount
Used to collect the number of Unicast packets received
on this trunk port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.5.1.3
rcTlsVpnTrunkStatisticsUcastOctetCount
Used to collect the number of Unicast octets received
on this trunk port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.5.1.4
rcTlsVpnTrunkStatisticsMcastPacketCount
Used to collect the number of Multicast packets received
on this trunk port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.5.1.5
rcTlsVpnTrunkStatisticsMcastOctetCount
Used to collect the number of Multicast octets received
on this trunk port for this TDI.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.39.5.1.6
rcTlsVpnTrunkStatisticsClear
Used to clear statistics for TDI and Port
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.39.5.1.7