rcTlsVpnRowStatus
RC-OPM-MIB ·
.1.3.6.1.4.1.2272.1.39.3.1.18
Object
Used for controlling the creation and deletion of this row
Context
- MIB
- RC-OPM-MIB
- OID
.1.3.6.1.4.1.2272.1.39.3.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcTlsVpnEntry
- Table
- rcTlsVpnTable
- Siblings
- 17
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcTlsVpnVpnId Vpn identifier. For the TLS VPN this is the VCId.
Distributed in the TFEC to the remote peer (other end
point of ). | column | Integer32 | .1.3.6.1.4.1.2272.1.39.3.1.1 |
| rcTlsVpnUniMac UNI MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.39.3.1.10 |
| rcTlsVpnTunnelGrpId Tunnel group to reach remote LER. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.11 |
| rcTlsVpnVcGrpId Is generated per UNI. Used for sending the wildcard
withdraw message to all the LDP neighbors. One
application is sending the withdraw message in the
event of the UNI interface i… | column | Integer32 | .1.3.6.1.4.1.2272.1.39.3.1.12 |
| rcTlsVpnVcLabel This is the vc label either allocated locally in the
case of local peer, or received from the remote
peer.
It is 20 bits long | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.13 |
| rcTlsVpnTunnelLspId Will be updated when Vpn Controller determines which Lsp
it is using for the Vpn (based on the bw requirements).
This will be updated upon detecting the existence of
tunnel to th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.14 |
| rcTlsVpnAdminState Not used by TLS yet. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.39.3.1.15 |
| rcTlsVpnOperState Change of state occurs upon establishing the label
mapping i.e., sending the TFEC and receiving the TFEC
or changes in Tunnel existence or LDP session.
For local peer, i.e., remot… | column | Enumeration | .1.3.6.1.4.1.2272.1.39.3.1.16 |
| rcTlsVpnTlsFlags TLS UNI flags. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.17 |
| rcTlsVpnMemberId This field along with the Id identifies an end point
of a Virtural circuit. In TLS VPN, this is
UNI ID. For creating the TLS VPN, Tdi must be configured
and this memberId value i… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.39.3.1.2 |
| rcTlsVpnRemotePeerId Remote LER IP address. 0.0.0.1 representing
the local peer. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.39.3.1.3 |
| rcTlsVpnName For ease of configuration. Can provide either during
the configuration or modification of this field is
allowed on when the admin state is disabled. Not
supoorted in this relea… | column | OctetString | .1.3.6.1.4.1.2272.1.39.3.1.4 |
| rcTlsVpnTdi Transparent domain identifier for TLS. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.5 |
| rcTlsVpnMode The transmission mode for interworking with Hornet. | column | Enumeration | .1.3.6.1.4.1.2272.1.39.3.1.6 |
| rcTlsVpnMemberType UNI type of the TLS VPN entry. | column | Enumeration | .1.3.6.1.4.1.2272.1.39.3.1.7 |
| rcTlsVpnUniPortListSize Size of the incoming (or member) Port list.
Valid only for multicast member type. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.39.3.1.8 |
| rcTlsVpnUniPortList The list of incoming (or member) ports.
Valid only for multicast member type. | column | OctetString | .1.3.6.1.4.1.2272.1.39.3.1.9 |