rcVpnServiceDegrationFactor
RC-OPM-MIB ·
.1.3.6.1.4.1.2272.1.37.1.1.12
Object
column
r/w
Integer32
This value indicates the service degradation factor (percent) either in the case of LSP failure or when bandwidth requirement changes.
Context
- MIB
- RC-OPM-MIB
- OID
.1.3.6.1.4.1.2272.1.37.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcVpnEntry
- Table
- rcVpnTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcVpnVpnId Vpn identifier. For the Martini L2s this is the VCId.
Distributed in the VFEC to the remote peer (other end
point of ). | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.1 |
| rcVpnOutBoundUpperBwReq This is part of required parameter to enable the
admin status. Specifies the upper bandwidth in Mbps.
Interpretation of this is based on the ServicType. | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.10 |
| rcVpnServiceType Type of service offered for the . | column | Enumeration | .1.3.6.1.4.1.2272.1.37.1.1.11 |
| rcVpnTunnelExpPolicyType This indicates how the Tunnel EXP bits will be defined.
Value of this field specify the interpretation of
TunnelExpPolicy value. | column | Enumeration | .1.3.6.1.4.1.2272.1.37.1.1.13 |
| rcVpnTunnelExpPolicy The usage of this field is signaled by
TunnelExpPolicyType. If the type is set to Explicit
then the value specified is the EXP bit value. Otherwise
the index for the mapping pol… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.37.1.1.14 |
| rcVpnVcGrpId Configuration of VcGroupId has local Significance.
it is sent in the VFEC. Used for sending the wildcard
withdraw message to all the LDP neighbors. One
application is sending th… | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.15 |
| rcVpnVcLabel This will be updated upon receiving the VFEC from the
remote peer. It is 20 bits long | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.37.1.1.16 |
| rcVpnTunnelLspId Will be updated when Vpn Controller determines which Lsp
it is using for the Vpn (based on the bw requirements).
This will be updated upon detecting the existence of
tunnel to th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.37.1.1.17 |
| rcVpnAdminState Use for configuration. Enable operation is allowed
only if the configuration of this entry contains
tunnel-group association, memeber information and SLA
attributes. Disable val… | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.37.1.1.18 |
| rcVpnOperState Change of state occurs upon establishing the label
mapping i.e., sending the VFEC and receiving the VFEC
or changes in Tunnel existence or LDP session. | column | Enumeration | .1.3.6.1.4.1.2272.1.37.1.1.19 |
| rcVpnMemberId This field along with the Id identifies an end point
of a Virtural circuit. In the martini point-to-point
this is PortID, where as in any2any this is
UNI ID. | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.2 |
| rcVpnRowStatus uses for controlling the creation and deletion of
this row | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.37.1.1.20 |
| rcVpnMemAction Add/Remove member from VPN. | column | Enumeration | .1.3.6.1.4.1.2272.1.37.1.1.21 |
| rcVpnQtagNumListSize The Size of qtags or range of qtags for this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.37.1.1.22 |
| rcVpnClassInteropMode Interoperability mode for a service class attached to
an L2-VPN. | column | Enumeration | .1.3.6.1.4.1.2272.1.37.1.1.23 |
| rcVpnAssociatedPortIfndx Extended Legacy port or MLTport member. | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.24 |
| rcVpnName For ease of configuration. Can provide either during
the configuration or modification of this field is
allowed on when the admin state is disabled. Not
supoorted in this relea… | column | OctetString | .1.3.6.1.4.1.2272.1.37.1.1.3 |
| rcVpnPort Providing member. | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.4 |
| rcVpnQtagNumOrRange List of qtags or range of qtags for this port.
( member) | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.37.1.1.5 |
| rcVpnLocalSwitch indicate the local switch. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.37.1.1.6 |
| rcVpnRemotePeerId Remote LER IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.37.1.1.7 |
| rcVpnTunnelGrpId Tunnel group for this to reach remote LER. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.37.1.1.8 |
| rcVpnOutBoundLowerBwReq This is part of required parameter to enable the
admin status. Specifies the lower guaranteed
bandwidth in Mbps. | column | Integer32 | .1.3.6.1.4.1.2272.1.37.1.1.9 |