RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
38

raisecomRemotePortTable

table
.1.3.6.1.4.1.8886.1.13.1.18 · 1 row entry · 19 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemotePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortTable' 
A table of remote devices port properties.
raisecomRemotePortEntry row .1.3.6.1.4.1.8886.1.13.1.18.1
Table entry for port control and status information in remote devices.
Indexes
Column Syntax OID
raisecomRemotePortIfindex
The ifIndex value based 1 which identifies the unique interface of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.13.1.18.1.2
raisecomRemotePortType
Port type in remote devices,same as slot type.
Enumeration
Enumerated Values:
0inexistence
1fx-DulMode-1000M
2tx-1000M
3fx-SigMode-1000M
4fx-DulMode-100M
5fx-SigMode-100M
6tx-100M
 .1.3.6.1.4.1.8886.1.13.1.18.1.3
raisecomRemotePortName
The port name of remote devices.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.8886.1.13.1.18.1.4
raisecomRemotePortAdminStatus
The administrative state of the port on remote devices.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.1.13.1.18.1.5
raisecomRemotePortOperStatus
The current operational state of the interface in remote devices.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.1.13.1.18.1.6
raisecomRemotePortDuplexSpeedSet
The desired speed and duplex of the interface in remote devices.
Enumerationr/w
Enumerated Values:
1autonegotiate
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
 .1.3.6.1.4.1.8886.1.13.1.18.1.7
raisecomRemotePortDuplexSpeedGet
The actual speed and duplex for this interface. If the interface
is not configured for an acceptable value, a value of illegal(99) is
returned. A value of unknown(1) is returned when the interface is down.
Enumeration
Enumerated Values:
1unknown
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
99illegal
 .1.3.6.1.4.1.8886.1.13.1.18.1.8
raisecomRemotePortFlowControlEnable
Set the flow control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.13.1.18.1.9
raisecomRemotePortFlowControlStatus
The actual port flow control status of remote device.
SWITCH-TCEnableVar
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.13.1.18.1.10
raisecomRemotePortIngressRate
The value is the ingress rate( kbps) of the port.
Integer32r/w
Constraints:
range: 0-1048576
 .1.3.6.1.4.1.8886.1.13.1.18.1.11
raisecomRemotePortEgressRate
The value is the egress rate( kbps) of the port.
Integer32r/w
Constraints:
range: 0-1048576
 .1.3.6.1.4.1.8886.1.13.1.18.1.12
raisecomRemotePortFaultPassEnable
Set fault pass to enable(1) or disable(2) on the port in remote device.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.13.1.18.1.13
raisecomRemotePortFaultPassPorts
The ports set which should be down when fault pass occurs.If
the value is 0,stands for fault pass function is disable on
this port,otherwise fault pass function is enable and the ports
set specifies which ports shou…
SWITCH-TCPortListr/w
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.13.1.18.1.14
raisecomRemotePortFaultPassStatus
Port state changging result of fault pass. If normal(1), there is no
fault pass occurring. If down(2), the port is down because of fault
pass occurring.
Enumeration
Enumerated Values:
1normal
2down
 .1.3.6.1.4.1.8886.1.13.1.18.1.15
raisecomRemotePortFaultReturnEnable
Set fault return on the port in remote device to enable(1) or disable(2).
This value of TP is unavailable.
Enumerationr/w
Enumerated Values:
1enable
2disable
3unavailable
 .1.3.6.1.4.1.8886.1.13.1.18.1.16
raisecomRemotePortFaultReturnStatus
Port state changging result of fault return.If normal(1), there
is no fault return occurring.If down(2), the port is down result
of fault return occurring.This value of TP is unavailable.
Enumeration
Enumerated Values:
1normal
2down
3unavailable
 .1.3.6.1.4.1.8886.1.13.1.18.1.17
raisecomRemotePortSD
SD status. This value of TP is unavailable.
Enumeration
Enumerated Values:
1normal
2sd
3unavailable
 .1.3.6.1.4.1.8886.1.13.1.18.1.18
raisecomRemoteOptModuleType
Optical module type of remote device port.
Enumeration
Enumerated Values:
1optical-M
2optical-S1
3optical-S2
4optical-S3
5optical-SS13
6optical-SS15
7optical-SS23
8optical-SS25
9optical-SS35
10unknown
 .1.3.6.1.4.1.8886.1.13.1.18.1.19
raisecomRemotePortDescr
The description of a port in remote device.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.13.1.18.1.20

raisecomRemotePortStatsTable

table
.1.3.6.1.4.1.8886.1.13.1.19 · 1 row entry · 19 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemotePortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB::raisecomRemotePortStatsTable' 
A table of remote devices port statistics.
raisecomRemotePortStatsEntry row .1.3.6.1.4.1.8886.1.13.1.19.1
Table entry of remote devices port statistics.
Indexes
Column Syntax OID
raisecomRemoteStatsPortIfindex
The ifIndex value based 1 which identifies the unique interface of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.13.1.19.1.1
raisecomRemotePortInOctets
The total number of octets received on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.2
raisecomRemotePortInPkts
The total number of packets received on the port..
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.3
raisecomRemotePortInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.4
raisecomRemotePortInMulticastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.5
raisecomRemotePortInBroadcastPkts
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a broadcast address at this sub-layer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.6
raisecomRemotePortOutOctets
The total number of octets transmitted out of the port,
including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.7
raisecomRemotePortOutPkts
The total number of packets transmitted out of the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.8
raisecomRemotePortOutUcastPkts
The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast
address at this sub-layer, including those that were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.9
raisecomRemotePortOutMulticastPkts
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a multicast address at this sub-layer, including those
that were discarded or not sent. For a MAC layer pro…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.10
raisecomRemotePortOutBroadcastPkts
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.13.1.19.1.11
raisecomRemotePortErrorPkts
The total number of bad packets received by a specific port of remote device.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.12
raisecomRemotePortDropEvents
The total number of events in which packets were dropped by
the probe due to lack of resources. Note that this number is
not necessarily the number of packets dropped; it is just the
number of times this condition h…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.13
raisecomRemotePortCRCAlignErrors
The total number of packets received that had a length (excluding
framing bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but but had either a bad Frame Check Sequence (FCS) with
an integral n…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.14
raisecomRemotePortUndersizePkts
The total number of packets received that were less than 64 octets
long (excluding framing bits, but including FCS octets) and were
otherwise well formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.15
raisecomRemotePortOversizePkts
The total number of packets received that were longer than 1518
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.16
raisecomRemotePortFragments
The total number of packets received that were less than 64 octets
in length (excluding framing bits but including FCS octets) and had
either a bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Er…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.17
raisecomRemotePortJabbers
The total number of packets received that were longer than 1518
octets (excluding framing bits, but including FCS octets), and
had either a bad Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.18
raisecomRemotePortCollisions
The best estimate of the total number of collisions on
this Ethernet segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.13.1.19.1.19