raisecomRemotePortFaultPassEnable
RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB ·
.1.3.6.1.4.1.8886.1.13.1.18.1.13
Object
Set fault pass to enable(1) or disable(2) on the port in remote device.
Context
- MIB
- RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
- OID
.1.3.6.1.4.1.8886.1.13.1.18.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- raisecomRemotePortEntry
- Table
- raisecomRemotePortTable
- Siblings
- 18
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomRemotePortFlowControlStatus The actual port flow control status of remote device. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.13.1.18.1.10 |
| raisecomRemotePortIngressRate The value is the ingress rate( kbps) of the port. | column | Integer32 | .1.3.6.1.4.1.8886.1.13.1.18.1.11 |
| raisecomRemotePortEgressRate The value is the egress rate( kbps) of the port. | column | Integer32 | .1.3.6.1.4.1.8886.1.13.1.18.1.12 |
| raisecomRemotePortFaultPassPorts The ports set which should be down when fault pass occurs.If
the value is 0,stands for fault pass function is disable on
this port,otherwise fault pass function is enable and t… | column | SWITCH-TCPortList | .1.3.6.1.4.1.8886.1.13.1.18.1.14 |
| raisecomRemotePortFaultPassStatus Port state changging result of fault pass. If normal(1), there is no
fault pass occurring. If down(2), the port is down because of fault
pass occurring. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.15 |
| raisecomRemotePortFaultReturnEnable Set fault return on the port in remote device to enable(1) or disable(2).
This value of TP is unavailable. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.16 |
| raisecomRemotePortFaultReturnStatus Port state changging result of fault return.If normal(1), there
is no fault return occurring.If down(2), the port is down result
of fault return occurring.This value of TP is un… | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.17 |
| raisecomRemotePortSD SD status. This value of TP is unavailable. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.18 |
| raisecomRemoteOptModuleType Optical module type of remote device port. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.19 |
| raisecomRemotePortIfindex The ifIndex value based 1 which identifies the unique interface of remote device. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.18.1.2 |
| raisecomRemotePortDescr The description of a port in remote device. | column | OctetString | .1.3.6.1.4.1.8886.1.13.1.18.1.20 |
| raisecomRemotePortType Port type in remote devices,same as slot type. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.3 |
| raisecomRemotePortName The port name of remote devices. | column | OctetString | .1.3.6.1.4.1.8886.1.13.1.18.1.4 |
| raisecomRemotePortAdminStatus The administrative state of the port on remote devices. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.5 |
| raisecomRemotePortOperStatus The current operational state of the interface in remote devices. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.6 |
| raisecomRemotePortDuplexSpeedSet The desired speed and duplex of the interface in remote devices. | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.7 |
| raisecomRemotePortDuplexSpeedGet The actual speed and duplex for this interface. If the interface
is not configured for an acceptable value, a value of illegal(99) is
returned. A value of unknown(1) is return… | column | Enumeration | .1.3.6.1.4.1.8886.1.13.1.18.1.8 |
| raisecomRemotePortFlowControlEnable Set the flow control on the interface to enable(1) or disable(2). | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.13.1.18.1.9 |