raisecomRemotePortFaultReturnStatus

RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB · .1.3.6.1.4.1.8886.1.13.1.18.1.17

MIB view Table view

Object

column Enumeration

Port state changging result of fault return.If normal(1), there
is no fault return occurring.If down(2), the port is down result
of fault return occurring.This value of TP is unavailable.

Context

MIB: RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
OID: .1.3.6.1.4.1.8886.1.13.1.18.1.17
Type: column
Access: readonly
Status: current
Parent: raisecomRemotePortEntry
Table: raisecomRemotePortTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	normal
`2`	down
`3`	unavailable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
raisecomRemotePortFlowControlStatus The actual port flow control status of remote device.	column	SWITCH-TCEnableVar	`.1.3.6.1.4.1.8886.1.13.1.18.1.10`
raisecomRemotePortIngressRate The value is the ingress rate( kbps) of the port.	column	Integer32	`.1.3.6.1.4.1.8886.1.13.1.18.1.11`
raisecomRemotePortEgressRate The value is the egress rate( kbps) of the port.	column	Integer32	`.1.3.6.1.4.1.8886.1.13.1.18.1.12`
raisecomRemotePortFaultPassEnable Set fault pass to enable(1) or disable(2) on the port in remote device.	column	SWITCH-TCEnableVar	`.1.3.6.1.4.1.8886.1.13.1.18.1.13`
raisecomRemotePortFaultPassPorts The ports set which should be down when fault pass occurs.If the value is 0,stands for fault pass function is disable on this port,otherwise fault pass function is enable and t…	column	SWITCH-TCPortList	`.1.3.6.1.4.1.8886.1.13.1.18.1.14`
raisecomRemotePortFaultPassStatus Port state changging result of fault pass. If normal(1), there is no fault pass occurring. If down(2), the port is down because of fault pass occurring.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.15`
raisecomRemotePortFaultReturnEnable Set fault return on the port in remote device to enable(1) or disable(2). This value of TP is unavailable.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.16`
raisecomRemotePortSD SD status. This value of TP is unavailable.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.18`
raisecomRemoteOptModuleType Optical module type of remote device port.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.19`
raisecomRemotePortIfindex The ifIndex value based 1 which identifies the unique interface of remote device.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.13.1.18.1.2`
raisecomRemotePortDescr The description of a port in remote device.	column	OctetString	`.1.3.6.1.4.1.8886.1.13.1.18.1.20`
raisecomRemotePortType Port type in remote devices,same as slot type.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.3`
raisecomRemotePortName The port name of remote devices.	column	OctetString	`.1.3.6.1.4.1.8886.1.13.1.18.1.4`
raisecomRemotePortAdminStatus The administrative state of the port on remote devices.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.5`
raisecomRemotePortOperStatus The current operational state of the interface in remote devices.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.6`
raisecomRemotePortDuplexSpeedSet The desired speed and duplex of the interface in remote devices.	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.7`
raisecomRemotePortDuplexSpeedGet The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is return…	column	Enumeration	`.1.3.6.1.4.1.8886.1.13.1.18.1.8`
raisecomRemotePortFlowControlEnable Set the flow control on the interface to enable(1) or disable(2).	column	SWITCH-TCEnableVar	`.1.3.6.1.4.1.8886.1.13.1.18.1.9`