RAISECOM-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

rcPsePortTable

table
.1.3.6.1.4.1.8886.6.1.51.1 · 1 row entry · 9 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcPsePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-POE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-POE-MIB::rcPsePortTable' 
POE Interface table
rcPsePortEntry row .1.3.6.1.4.1.8886.6.1.51.1.1
An entry in the rcPsePortTable. It contains
POE status in each interface port.
Indexes
Column Syntax OID
rcPsePortPeakPower
The peak power of the PSE port in milliWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.1
rcPsePortAveragePower
The average power of the PSE port in milliWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.2
rcPsePortCurrentPower
The current power of the PSE port in milliWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.3
rcPsePortCurrentVoltage
The current voltage of the PSE port in Millivolt.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.4
rcPsePortCurrent
The current circuit of the PSE port in Milliampere.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.5
rcPsePortPowerLimit
The max power of the PSE port in milliWatts.the value is configured by manual.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.1.1.6
rcPsePortOperStatus
The operational status of the port PSE.1:enable,2:disable,3:force-power
Enumeration
Enumerated Values:
1enable
2disable
3force-power
 .1.3.6.1.4.1.8886.6.1.51.1.1.7
rcPsePortForcePower
The force-power status of the port PSE.1:enable,2:disable
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.51.1.1.8
rcPsePortPoeProtectStatus
The poe protect status of the port PSE.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.8886.6.1.51.1.1.9

rcMainPseTable

table
.1.3.6.1.4.1.8886.6.1.51.2 · 1 row entry · 9 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMainPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-POE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-POE-MIB::rcMainPseTable' 
A table of objects that display and control attributes
of the main power source in a PSE  device.  Ethernet
switches are one example of boxes that would support
these objects.
rcMainPseEntry row .1.3.6.1.4.1.8886.6.1.51.2.1
A set of objects that display and control the Main
power of a PSE.
Indexes
Column Syntax OID
rcMainPseAveragePower
The average power of the PSE in milliWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.2.1.1
rcMainPsePeakPower
The peak power of the PSE in milliWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.2.1.2
rcMainPseLegacyDetectionEnable
Legacy CAP Detection??1-enable??2-disable
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.51.2.1.3
rcMainPseManageMode
The management mode of power of PSE. 1-auto mode,2-manual mode.
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.8886.6.1.51.2.1.4
rcMainPseTemperatureProtect
The swich of over tempreture protection.1-enable;2-disable.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.51.2.1.5
rcMainPseModuleOverTemp
The status of over tempreture alarm for PSE,1-normal;2-alarm.
Enumeration
Enumerated Values:
1normal
2alarm
 .1.3.6.1.4.1.8886.6.1.51.2.1.6
rcMainPseChipSupplyVoltage
The Vmain Voltage Measurement in Millivolt.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.51.2.1.7
rcMainPseHighInrushEnable
The power-on instantly whether to allow high current impact,1-allow;2-ban
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.51.2.1.9
rcMainPseCurrentProtectMode
Set current protect level according to CLASS Level. 1: Set Icut according
to CLASS; 2: Set Icut to maximum value according to power allocation limits
Enumerationr/w
Enumerated Values:
1class
2power
 .1.3.6.1.4.1.8886.6.1.51.2.1.10