Standard view Table view

RAISECOM-POE-MIB

        This MIB module defines objects to POE
Source file
RAISECOM-POE-MIB
Last revised
Identity
rcPoe
Base OID
1.3.6.1.4.1.8886.6.1.51
Imported Objects
IF-MIB InterfaceIndex
POWER-ETHERNET-MIB pethMainPseGroupIndex pethPsePortGroupIndex pethPsePortIndex
RAISECOM-BASE-MIB iscomSwitch
SNMPv2-SMI Unsigned32
SWITCH-TC EnableVar
Net-SNMP examples using the raisecom MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RAISECOM-POE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAISECOM-POE-MIB::rcPoe'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-POE-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-POE-MIB::rcPoe'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
rcPoe
.1.3.6.1.4.1.8886.6.1.51
rcPsePortTable
.1.3.6.1.4.1.8886.6.1.51.1
rcPsePortEntry
POWER-ETHERNET-MIBpethPsePortGroupIndexPOWER-ETHERNET-MIBpethPsePortIndex
 .1.3.6.1.4.1.8886.6.1.51.1.1
rcPsePortPeakPower
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.1
rcPsePortAveragePower
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.2
rcPsePortCurrentPower
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.3
rcPsePortCurrentVoltage
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.4
rcPsePortCurrent
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.5
rcPsePortPowerLimit r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.1.1.6
rcPsePortOperStatus
Enumeration
 .1.3.6.1.4.1.8886.6.1.51.1.1.7
rcPsePortForcePower r/w
SWITCH-TCEnableVar
 .1.3.6.1.4.1.8886.6.1.51.1.1.8
rcPsePortPoeProtectStatus r/w
OctetString
 .1.3.6.1.4.1.8886.6.1.51.1.1.9
rcMainPseTable
.1.3.6.1.4.1.8886.6.1.51.2
rcMainPseEntry
POWER-ETHERNET-MIBpethMainPseGroupIndex
 .1.3.6.1.4.1.8886.6.1.51.2.1
rcMainPseAveragePower
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.2.1.1
rcMainPseCurrentProtectMode r/w
Enumeration
 .1.3.6.1.4.1.8886.6.1.51.2.1.10
rcMainPsePeakPower
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.2.1.2
rcMainPseLegacyDetectionEnable r/w
SWITCH-TCEnableVar
 .1.3.6.1.4.1.8886.6.1.51.2.1.3
rcMainPseManageMode r/w
Enumeration
 .1.3.6.1.4.1.8886.6.1.51.2.1.4
rcMainPseTemperatureProtect r/w
SWITCH-TCEnableVar
 .1.3.6.1.4.1.8886.6.1.51.2.1.5
rcMainPseModuleOverTemp
Enumeration
 .1.3.6.1.4.1.8886.6.1.51.2.1.6
rcMainPseChipSupplyVoltage
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.8886.6.1.51.2.1.7
rcMainPseHighInrushEnable r/w
SWITCH-TCEnableVar
 .1.3.6.1.4.1.8886.6.1.51.2.1.9
rcPoeNotifications
.1.3.6.1.4.1.8886.6.1.51.3
Dependencies (11) 5 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. SNMP-FRAMEWORK-MIBrfc
  8. POWER-ETHERNET-MIBrfc
  9. RFC1155-SMIrfc
  10. RAISECOM-BASE-MIBraisecom
  11. SWITCH-TCraisecom
  12. RAISECOM-POE-MIBraisecomselected
Notifications / Traps (1)
NameOIDDescription
rcMainPseOverTempreture
rcMainPseModuleOverTemp
.1.3.6.1.4.1.8886.6.1.51.3.1
This Notification indicates if Pse is over tempreture or below tempreture.
This Notification SHOULD be sent on every status change.