RAD-OamCfm-MIB Table View

Service configuration table associated with Services running on a MEP.

ethOamServiceEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1

An entry in the table. Indices are as follows:
- radOamIdx1 corresponds to MD Id (IEEE8021-CFM-MIB.dot1agCfmMdIndex).
- radOamEvcIdx corresponds to MA Id (IEEE8021-CFM-MIB.dot1agCfmMaIndex).
- radMepIdx corresponds to M…

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx

Column	Syntax	OID
ethOamServiceIdx This object indicates the Index of the service being accessed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1
ethOamServiceRowStatus This attribute allows to create/delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2
ethOamServicePriority This object determines the priority of the service. It is sent as P bits in an OAM message originated by this service.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3
ethOamServicePmEnable This object determines PM (Performance Monitoring) shall be enabled or not for the service. Setting the object to disable(2) will stop the PM activity of all Destination NEs of this service.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4
ethOamServiceFrameLossRatioThresh This object determines the Frame Loss ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4.	Integer32r/w Constraints: range: 3-10	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5
ethOamServiceDelayThresh This object determines the delay threshold defined for this service, in measurement unit of 0.1 milliseconds (100 x usec).	Integer32r/w Constraints: range: 0-5000000	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6
ethOamServiceDelayVarThresh This object determines the delay-variation threshold defined for this service, in measurement unit of 0.1 milliseconds (100 x usec).	Integer32r/w Constraints: range: 0-5000000	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7
ethOamServiceUnavailRatioThresh This object determines the Unavailability ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4.	Integer32r/w Constraints: range: 3-10	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8
ethOamServiceTxFrames Counts the number of frames trnasmitted by since the time the service is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9
ethOamServiceOverflowTxFrames The number of times the associated ethOamServiceTxFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10
ethOamServiceFarEndFrameLoss Counts the number of frames lost at the far end since the time the service is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11
ethOamServiceOverflowFarEndFrameLoss The number of times the associated ethOamServiceFarEndFrameLoss counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12
ethOamServiceFarEndFrameLossRatio Indicates the ratio of the lost frames at the far end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13
ethOamServiceElapsedTime Indicates the time elapsed in seconds since the time the service is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14
ethOamServiceUnavailSec Indicates the number of unavailable seconds since the time the service is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15
ethOamServiceUnavailRatio Indicates the ratio of the unavailable seconds since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16
ethOamServiceFramesAboveDelay Indicates the number of frames arrived with delay greater than the delay threshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17
ethOamServiceOverflowFramesAboveDelay Indicates the number of times the associated ethOamServiceFramesAboveDelay counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18
ethOamServiceFramesAboveDelayVar Indicates the number of frames arrived with delay variation greater than the delay variation threshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19
ethOamServiceOverflowFramesAboveDelayVar Indicates the number of times the associated ethOamServiceFramesAboveDelayVar counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20
ethOamServiceCurrentDelay Indicates the last measured delay sample.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21
ethOamServiceCurrentDelayVariation Indicates the last measured delay variation sample.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22
ethOamServiceResetCounters Reset all PM counters of the selected service.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23
ethOamServiceNearEndFrameLoss Counts the number of frames lost at the near end since the time the service is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.25
ethOamServiceOverflowNearEndFrameLoss The number of times the associated ethOamServiceNearEndFrameLoss counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.26
ethOamServiceNearEndFrameLossRatio Indicates the ratio of the lost frames at the near end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.27
ethOamServiceDmmInterval Indicates the interval between DMM transmissions. This value is used by all Destination NEs defined on a Service.	IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Type Values: 0 intervalInvalid 1 interval300Hz 2 interval10ms 3 interval100ms 4 interval1s 5 interval10s 6 interval1min 7 interval10min	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.28
ethOamServiceLmmInterval Indicates the interval between PM transmissions: DMM and LMM in Phase 2, LMM only in Phase 3. This value is used by all Destination NEs defined on a Service.	IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Type Values: 0 intervalInvalid 1 interval300Hz 2 interval10ms 3 interval100ms 4 interval1s 5 interval10s 6 interval1min 7 interval10min	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.29
ethOamServiceTxLmm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.30
ethOamServiceOverflowTxLmm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.31
ethOamServiceTxDmm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.32
ethOamServiceOverflowTxDmm	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.33
ethOamServiceRxLmr Counts the number of LMR frames received since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.34
ethOamServiceOverflowRxLmr The number of times the associated ethOamDestNeRxLmr counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.35
ethOamServiceRxDmr Counts the number of DMR frames received since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.36
ethOamServiceOverflowRxDmr The number of times the associated ethOamDestNeRxDmr counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.37
ethOamServiceTxForward Counts the number of transmitted frames in the forward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.38
ethOamServiceOverflowTxForward Indicates the number of times the associated ethOamDestNeTxForward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.39
ethOamServiceRxForward Counts the number of received frames in the forward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.40
ethOamServiceOverflowRxForward Indicates the number of times the associated ethOamDestNeRxForward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.41
ethOamServiceTxBackward Counts the number of transmitted frames in the backward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.42
ethOamServiceOverflowTxBackward Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.43
ethOamServiceRxBackward Counts the number received frames in the backward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.44
ethOamServiceOverflowRxBackward Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.45
ethOamServiceConvertedIndex This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this Service.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.46

ETH OAM Service/Destination NE Current PM counters Table.

ethOamSvcCurrentStatEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1

Each entry in this table contains the ETH OAM PM counters for the current interval.
The counters are per Service, and/or per Destination NE.
The value of the 4th index - ethOamServiceIdx - is either the Service ID, or,
…

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx

Column	Syntax	OID
ethOamSvcCurrFramesAboveDelayThresh Number of frames that arrived in the current interval at a delay greater than the threshold value defined for the service.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1
ethOamSvcCurrFramesBelowDelayThresh Number of frames that arrived in the current interval at a delay lower than or equal to the threshold value defined for the service.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2
ethOamSvcCurrFramesAboveDVarThresh Number of frames that arrived in the current interval at a delay variation greater than the threshold value defined for the service.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3
ethOamSvcCurrFramesBelowDVarThresh Number of frames that arrived in the current interval at a delay variation lower than or equal to the threshold value defined for the service.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4
ethOamSvcCurrFramesTxCounter Number of trnasmitted frames in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5
ethOamSvcCurrFarEndFramesLossCounter The number of lost frames at the far end in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6
ethOamSvcCurrMinRoundTripDelay The mininal value of round trip delay in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7
ethOamSvcCurrMaxRoundTripDelay The maximum value of round trip delay in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8
ethOamSvcCurrAvgRoundTripDelay The average round trip delay in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9
ethOamSvcCurrMaxRoundTripDVar The maximum value of round trip delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10
ethOamSvcCurrAvgRoundTripDVar The average round trip delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11
ethOamSvcCurrElapsedTime The number of seconds that have elapsed since the beginning of the current interval.	Integer32 Constraints: range: 0-899	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12
ethOamSvcCurrUnavailSec The number of seconds that the service was unavailable in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13
ethOamSvcCurrLmmTxFrames Number of transmitted LMM frames in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.14
ethOamSvcCurrDmmTxFrames Number of transmitted DMM frames in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.16
ethOamSvcCurrLmrRxFrames Number of received LMR frames in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.19
ethOamSvcCurrDmrRxFrames Number of received DMR frames in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.21
ethOamSvcCurrNearEndFramesLossCounter The number of lost frames at the near end in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.22
ethOamSvcCurrTxFramesForward The total number of frames transmited in the forward direction in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.23
ethOamSvcCurrRxFramesForward The total number of of frames received in the forward direction in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.24
ethOamSvcCurrTxFramesBackward The total number of of frames transmited in the backward direction (as reported by far-end) in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.25
ethOamSvcCurrRxFramesBackward The total number of frames received in the backward direction (as reported by far-end) in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.26
ethOamSvcCurrUnavailableIndForward Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the current interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.27
ethOamSvcCurrUnavailableIndBackward Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the current interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.28
ethOamSvcCurrNearEndFrameLossRatio Object reflecting the percentage lost frames at the near end direction. Equals to (near End frame loss / Tx frame count in the forward direction) in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.29
ethOamSvcCurrFarEndFrameLossRatio Object reflecting the percentage lost frames at the far end direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the current interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.30
ethOamSvcCurrMinRoundTripDVar The minimal value of round trip delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.31
ethOamSvcCurrMinForwardDelay The minimal value of one way (forward 1DM) delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.32
ethOamSvcCurrMaxForwardDelay The maximum value of one way (forward 1DM) delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.33
ethOamSvcCurrAvgForwardDelay The average value of one way (forward 1DM) delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.34
ethOamSvcCurrMinForwardDVar The minimal value of one way forward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.35
ethOamSvcCurrMaxForwardDVar The maximum value of one way forward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.36
ethOamSvcCurrAvgForwardDVar The average value of one way forward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.37
ethOamSvcCurrMinBackwardDVar The minimal value of one way backward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.38
ethOamSvcCurrMaxBackwardDVar The maximum value of one way backward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.39
ethOamSvcCurrAvgBackwardDVar The average value of one way backward delay variation in the current interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.40
ethOamSvcCurrAvailableIndForward Counter reflecting the number of availability indicators evaluated as available in the forward direction in the current interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.41
ethOamSvcCurrAvailableIndBackward Counter reflecting the number of availability indicators evaluated as available in the backward direction in the current interval.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.42

Each entry in this table contains the ETH OAM PM counters
collected over the previous 24 hours of operation.
The past 24 hours are broken into 96 completed 15 minute intervals.
The counters are per Service, and/or per Destination NE.
Please refer to for ethOamSvcCurrentStatEntry for index resolution.

ethOamSvcIntervalEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1

Interval Statistics per service

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcIntervalNum

Column	Syntax	OID
ethOamSvcIntervalNum The Interval index, which is actualy the Interval number, where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1
ethOamSvcIntervalFramesAboveDelayThresh Number of frames that arrived in a delay greater than the threshold value defined for the service in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2
ethOamSvcIntervalFramesBelowDelayThresh Number of frames that arrived in a delay lower than the threshold value defined for the service in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3
ethOamSvcIntervalFramesAboveDVarThresh Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4
ethOamSvcIntervalFramesBelowDVarThresh Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5
ethOamSvcIntervalFramesTxCounter Number of trnasmitted frames in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6
ethOamSvcIntervalFarEndFramesLossCounter The number of lost frames at the far end in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7
ethOamSvcIntervalMinRoundTripDelay The mininal value of round trip delay in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8
ethOamSvcIntervalMaxRoundTripDelay The maximum value of round trip delay in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9
ethOamSvcIntervalAvgRoundTripDelay The average round trip delay in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10
ethOamSvcIntervalMaxRoundTripDVar The maximum value of round trip delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11
ethOamSvcIntervalAvgRoundTripDVar The average round trip delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12
ethOamSvcIntervalUnavailSec The number of seconds that the service was unavailable in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13
ethOamSvcIntervalLmmTxFrames Number of transmitted LMM frames in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.14
ethOamSvcIntervalDmmTxFrames Number of transmitted DMM frames in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.16
ethOamSvcIntervalLmrRxFrames Number of received LMR frames in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.19
ethOamSvcIntervalDmrRxFrames Number of received DMR frames in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.21
ethOamSvcIntervalNearEndFramesLossCounter The number of lost frames at the near end in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.22
ethOamSvcIntervalTxFramesForward The number of transmitted frames in the forward direction in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.23
ethOamSvcIntervalRxFramesForward The number of received frames in the forward direction in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.24
ethOamSvcIntervalTxFramesBackward The number of transmitted frames in the backward direction in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.25
ethOamSvcIntervalRxFramesBackward The number of received frames in the backward direction in the selected interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.26
ethOamSvcIntervalUnavailableIndForward Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the selected interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.27
ethOamSvcIntervalUnavailableIndBackward Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the selected interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.28
ethOamSvcIntervalNearEndFrameLossRatio Object reflecting the percentage lost frames at the near end direction. Equals to (near End frame loss / Tx frame count in the forward direction) in the current interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.29
ethOamSvcIntervalFarEndFrameLossRatio Object reflecting the percentage lost frames at the far end direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the current interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.30
ethOamSvcIntervalValidData This object indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.31
ethOamSvcIntervalDuration The Object presents duration of a particular interval in seconds. The partial second is counted.	Integer32 Constraints: range: 1-900	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.32
ethOamSvcIntervalTimeStamp The Object presents date and time of start of Interval. Time zone octets are not used (OCTET STRING (SIZE (8)).	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.33
ethOamSvcIntervalMinRoundTripDVar The minimal value of round trip delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.34
ethOamSvcIntervalMinForwardDelay The minimal value of one way (forward 1DM) delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.35
ethOamSvcIntervalMaxForwardDelay The maximum value of one way (forward 1DM) delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.36
ethOamSvcIntervalAvgForwardDelay The average value of one way (forward 1DM) delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.37
ethOamSvcIntervalMinForwardDVar The minimal value of one way forward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.38
ethOamSvcIntervalMaxForwardDVar The maximum value of one way forward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.39
ethOamSvcIntervalAvgForwardDVar The average value of one way forward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.40
ethOamSvcIntervalMinBackwardDVar The minimal value of one way backward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.41
ethOamSvcIntervalMaxBackwardDVar The maximum value of one way backward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.42
ethOamSvcIntervalAvgBackwardDVar The average value of one way backward delay variation in the selected interval.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.43
ethOamSvcIntervalAvailableIndForward Counter reflecting the number of availability indicators evaluated as available in the forward direction in the selected interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.44
ethOamSvcIntervalAvailableIndBackward Counter reflecting the number of availability indicators evaluated as available in the backward direction in the selected interval.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.45

ETH OAM Service Total (24H) Statistics Table.

ethOamSvcTotalEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1

Each entry in this table contains the ETH OAM PM counters
collected over the previous 24 hours of operation.
The counters are per Service, and/or per Destination NE.
Please refer to for ethOamSvcCurrentStatEntry for ind…

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx

Column	Syntax	OID
ethOamSvcTotalFramesAboveDelayThresh Number of frames that arrived in a delay greater than the threshold value defined for the service in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1
ethOamSvcTotalFramesBelowDelayThresh Number of frames that arrived in a delay lower than the threshold value defined for the service in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2
ethOamSvcTotalFramesAboveDVarThresh Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3
ethOamSvcTotalFramesBelowDVarThresh Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4
ethOamSvcTotalFramesTxCounter Number of trnasmitted frames in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5
ethOamSvcTotalFarEndFramesLossCounter The nuumber of lost frames at the far end in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6
ethOamSvcTotalMinRoundTripDelay The mininal value of round trip delay in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7
ethOamSvcTotalMaxRoundTripDelay The maximum value of round trip delay in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8
ethOamSvcTotalAvgRoundTripDelay The average round trip delay in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9
ethOamSvcTotalMaxRoundTripDVar The maximum value of round trip delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10
ethOamSvcTotalAvgRoundTripDVar The average round trip delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11
ethOamSvcTotalUnavailSec The number of seconds that the service was unavailable in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12
ethOamSvcTotalLmmTxFrames Number of transmitted LMM frames in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.13
ethOamSvcTotalDmmTxFrames Number of transmitted DMM frames in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.15
ethOamSvcTotalLmrRxFrames Number of received LMR frames in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.18
ethOamSvcTotalDmrRxFrames Number of received DMR frames in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.20
ethOamSvcTotalNearEndFramesLossCounter The number of lost frames at the near end in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.21
ethOamSvcTotalTxFramesForward Number of transmitted frames in the forward direction in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.22
ethOamSvcTotalRxFramesForward Number of received frames in the forward direction in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.23
ethOamSvcTotalTxFramesBackward Number of transmitted frames in the backward direction in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.24
ethOamSvcTotalRxFramesBackward Number of received frames in the backward direction in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.25
ethOamSvcTotalUnavailableIndForward Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the last 24H.	secondsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.26
ethOamSvcTotalUnavailableIndBackward Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the last 24H	secondsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.27
ethOamSvcTotalMinRoundTripDVar The minimal value of round trip delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.29
ethOamSvcTotalMinForwardDelay The minimal value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.30
ethOamSvcTotalMaxForwardDelay The maximum value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.31
ethOamSvcTotalAvgForwardDelay The average value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.32
ethOamSvcTotalMinForwardDVar The minimal value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.33
ethOamSvcTotalMaxForwardDVar The maximum value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.34
ethOamSvcTotalAvgForwardDVar The average value of one way (forward 1DM) delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.35
ethOamSvcTotalMinBackwardDVar The minimal value of one way backward delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.36
ethOamSvcTotalMaxBackwardDVar The maximum value of one way backward delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.37
ethOamSvcTotalAvgBackwardDVar The average value of one way backward delay variation in the last 24H.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.38
ethOamSvcTotalForwardFrameLossRatio Object reflecting the percentage lost frames at the forward direction. Equals to (near End frame loss / Tx frame count in the backward direction) in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.39
ethOamSvcTotalBackwardFrameLossRatio Object reflecting the percentage lost frames at the backward direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the last 24H.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.40
ethOamSvcTotalAvailableIndForward Counter presenting the number of availability indicators evaluated as available in the forward direction in the last 24H.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.41
ethOamSvcTotalAvailableIndBackward Counter presenting the number of availability indicators evaluated as available in the backward direction in the last 24H.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.42

One of the targets in ETH OAM is to support point-to-point
as well as point-to-multipoint PM.
For point-to-multipoint support it is needed to identify each of
the remote NEs to which PM frames are sent,
and from which PM frames are received.
PM activity for each such remote NE (Destination NE)
is managed separately,
maintaining its own set of parameters and PM counters.
          
Note:
In point-to-multipoint PM mode, only the first
defined Destination NE (per Service)
will count the transmitted (DMM, LMM) multicast frames.

ethOamDestNeEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1

Each entry in the table holds the parameters of a Destination NE.

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamDestNeIdx

Column	Syntax	OID
ethOamDestNeIdx This object indicates the Index of the Destination NE being accessed.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.1
ethOamDestNeRowStatus This attribute allows to create/delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.2
ethOamDestNePmDestAddr This object indicates the destination NE (remote) MAC Address that PM frames (LMMs, DMMs, LMRs and DMRs) are sent to. If its value is 0, then the ethOamDestNePmRemoteMepId will be used. Setting this object to a value di…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.3
ethOamDestNePmRemoteMepId This object indicates the Remote MEP ID that PM frames are sent to. This parameter refers to dot1agCfmMaMepListIdentifier of the MEP. If no remote MEP has been learned yet, the value will be 0, until a remote MEP is lea…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.4
ethOamDestNePmActivitydeprecated This object defines the PM activity of the specific Destination NE. Setting this object to 0 (all zeros) will stop all PM activity for the Destination NE. singleEndedLoss(0) and dualEndedLoss(1) cannot be set simultaneo…	Bitsr/w Enumerated Values: 0 singleEndedLoss 1 dualEndedLoss 2 oneWayDelay 3 twoWayDelay	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.5
ethOamDestNeTxFrames Counts the total number of frames transmitted since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.6
ethOamDestNeOverflowTxFrames The number of times the associated ethOamDestNeTxFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.7
ethOamDestNeTxLmm Counts the number of LMM frames transmitted since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.8
ethOamDestNeOverflowTxLmm The number of times the associated ethOamDestNeTxLmm counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.9
ethOamDestNeTxDmm Counts the number of DMM frames transmitted since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.12
ethOamDestNeOverflowTxDmm The number of times the associated ethOamDestNeTxDmm counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.13
ethOamDestNeRxLmr Counts the number of LMR frames received since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.18
ethOamDestNeOverflowRxLmr The number of times the associated ethOamDestNeRxLmr counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.19
ethOamDestNeRxDmr Counts the number of DMR frames received since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.22
ethOamDestNeOverflowRxDmr The number of times the associated ethOamDestNeRxDmr counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.23
ethOamDestNeFarEndFrameLoss Counts the number of frames lost at the far end since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.24
ethOamDestNeOverflowFarEndFrameLoss The number of times the associated ethOamDestNeFarEndFrameLoss counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.25
ethOamDestNeFarEndFrameLossRatio Indicates the ratio of the lost frames at the far end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.26
ethOamDestNeTimeElapsed Indicates the time elapsed in seconds since the time the service is up, or since last counters reset.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.27
ethOamDestNeFramesAboveDelay Indicates the number of frames arrived with delay greater than the delay threshold, since the time the service is up, or since last counters reset. Delay threshold is defined in RMON-MIB in alarmTable (alarmRisingThresh…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.30
ethOamDestNeOverflowFramesAboveDelay Indicates the number of times the associated ethOamDestNeFramesAboveDelay counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.31
ethOamDestNeFramesAboveDelayVar Indicates the number of frames arrived with delay variation greater than the delay variation threshold, since the time the service is up, or since last counters reset. Delay variation threshold is defined in RMON-MIB in…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.32
ethOamDestNeOverflowFramesAboveDelayVar Indicates the number of times the associated ethOamDestNeFramesAboveDelayVar counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.33
ethOamDestNeCurrentDelay Indicates the last measured delay sample.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.34
ethOamDestNeCurrentDelayVariation Indicates the last measured delay variation sample.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.35
ethOamDestNeResetCounters Reset all PM counters related to the Destination NE.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.36
ethOamDestNeNearEndFrameLoss Counts the number of frames lost at the near end since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.37
ethOamDestNeOverflowNearEndFrameLoss The number of times the associated ethOamDestNeNearEndFrameLoss counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.38
ethOamDestNeNearEndFrameLossRatio Indicates the ratio of the lost frames at the near end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.39
ethOamDestNeLmmTraffic Determine if Frame Loss measurements will be applied on synthetic traffic or on real traffic (all, Green only or Yellow only, with or without CCM). Note that if the MEP is configured in E-LAN forwarding mode, only synth…	Enumerationr/w Enumerated Values: 1 syntheticTraffic 2 realTraffic 3 lmmSynthetic 4 slm 5 realTrafficGreen 6 realTrafficYellow 7 realTrafficNoCcm 8 realTrafficGreenNoCcm 255 notApplicable	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.40
ethOamDestNeFramesAboveDelayBinProfile This variable defines the delay measurement bin profile assigned to this Dest NE. If set to '0', no profile is assigned to this Dest NE.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.41
ethOamDestNeFramesAboveDelayVarBinProfile This variable defines the dalay variation measurement bin profile assigned to this Dest NE. If set to '0', no profile is assigned to this Dest NE.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.42
ethOamDestNeDmmDataTlvLength This variable denotes the length of the data TLV sent in DMM frames.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.43
ethOamDestNeLossActivity Determine the type of activity for Tx LMM.	Enumerationr/w Enumerated Values: 1 none 2 singleEnded 3 dualEnded	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.44
ethOamDestNeDelayActivity Determine the type of activity for Tx DMM.	Enumerationr/w Enumerated Values: 1 none 2 oneWay 3 twoWay	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.45
ethOamDestNeTxForward Counts the number of transmitted frames in the forward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.46
ethOamDestNeOverflowTxForward Indicates the number of times the associated ethOamDestNeTxForward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.47
ethOamDestNeRxForward Counts the number of received frames in the forward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.48
ethOamDestNeOverflowRxForward Indicates the number of times the associated ethOamDestNeRxForward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.49
ethOamDestNeTxBackward Counts the number of transmitted frames in the backward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.50
ethOamDestNeOverflowTxBackward Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.51
ethOamDestNeRxBackward Counts the number received frames in the backward direction since the time the service is up, or since last counters reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.52
ethOamDestNeOverflowRxBackward Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.53
ethOamDestNeUnavailableIndForward Counts the number of unavailability indicators evaluated as unavailable in the forward direction since the time the service is up, or since last counters reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.54
ethOamDestNeOverflowUnavailableIndForward Indicates the number of times the associated ethOamDestNeUnavailableIndForward counter has overflowed.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.55
ethOamDestNeUnavailableIndBackward Counts Counts the number of unavailability indicators evaluated as unavailable in the backward direction since the time the service is up, or since last counters reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.56
ethOamDestNeOverflowUnavailableIndBackward Indicates the number of times the associated ethOamDestNeUnavailableIndBackward counter has overflowed.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.57
ethOamDestNeUnavailRatioForward Indicates the ratio of the unavailable seconds, in the forward direction, in the last 48 intervals. (12 hours window). The mib value is the ratio multiplied by 1000. 0xFFFFFFFF will be returned for ratio greater than 4/…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.58
ethOamDestNeUnavailRatioBackward Indicates the ratio of the unavailable seconds, in the backward direction, in the last 48 intervals period (12 hours window). The mib value is the ratio multiplied by 1000. 0xFFFFFFFF will be returned for ratio greater …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.59
ethOamDestNeDescr A textual string containing information about the Remote MEP.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.61
ethOamDestNeConvertedIndex This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this Dest NE.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.62
ethOamDestNeSlmDataTlvLength This object indicates the SLM Data TLV length. It is taken into consideration only if ethOamDestNeLmmTraffic is set to 'slm'(4).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.63
ethOamDestNeLmMode Determines Loss Measurement work mode: rx(1): Rx only. txAndRx(2): Tx and Rx.	Enumerationr/w Enumerated Values: 1 rx 2 txAndRx	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.64
ethOamDestNeSlmTestId This object indicates the unique indication per EVC.COS and MEP/RMEP of SLM Test ID. Range of values is 1..255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.65
ethOamDestNeForwardDelayVarBinProfile This variable defines the 1-Way delay measurement bin profile assigned to this Dest NE forward direction. if set to '0', no profile is assigned to this Dest NE.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.66
ethOamDestNeBackwardDelayVarBinProfile This variable defines the 1-Way delay measurement bin profile assigned to this Dest NE backward direction. if set to '0', no profile is assigned to this Dest NE.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.67
ethOamDestNeAvailableIndForward Counts the number of availability indicators evaluated as available in the forward direction since the time the service is up, or since last counters reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.68
ethOamDestNeAvailableIndBackward Counts the number of availability indicators evaluated as available in the backward direction since the time the service is up, or since last counters reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.69
ethOamDestNeDelayVariationForward Indicates the last calculated one way forward delay variation value.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.70
ethOamDestNeDelayVariationBackward Indicates the last calculated one way forward delay variation value.	microsecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.71

The purpose of this table is to enable RMON parameters configuration
for all Destination NEs that exists for a certain service.

ethOamSvcRmonConfigEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1

An entry in this table includes parameters to be configured in
alarmTable and eventTable of RMON-MIB.
When the manager creates an entry in this table, the agent
automatically creates corresponding entries in
RMON-MIB.al…

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcRmonConfigPerfAttrib

Column	Syntax	OID
ethOamSvcRmonConfigPerfAttrib Each value corresponds to a service performance attribute (as defined in MEF 10.1), that can be monitored. The value set to this variable is used to resolve which counter's OID will be set to alarmTable.alarmVariable of…	Enumeration Enumerated Values: 1 framesAboveDelay 2 framesAboveDelayVar 3 farEndFrameLossRatio 4 nearEndFrameLossRatio 5 unavailabilityRatio 6 farEndUnavailabilityRatio 7 nearEndUnavailabilityRatio	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.1
ethOamSvcRmonConfigRowStatus This variable enables table row creation and deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.2
ethOamSvcRmonConfigAlarmInterval The value set to this variable will be set (by the agent) to alarmTable.alarmInterval in RMON-MIB for each Dest NE. The measurement unit is seconds. For further information refer to RFC-2819.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.3
ethOamSvcRmonConfigAlarmRisingThresh The value set to this variable will be set (by the agent) to alarmTable.alarmRisingThreshold in RMON-MIB for each Dest NE. For further information refer to RFC-2819.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.4
ethOamSvcRmonConfigAlarmFallingThresh The value set to this variable will be set (by the agent) to alarmTable.alarmFallingThreshold in RMON-MIB for each Dest NE. For further information refer to RFC-2819.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.5
ethOamSvcRmonConfigEventType The value set to this variable will be set (by the agent) to eventTable.eventType in RMON-MIB for each Dest NE. For further information refer to RFC-2819.	Enumerationr/w Enumerated Values: 1 none 2 log 3 snmptrap 4 logandtrap	.1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.6

This table defines measurement bin profiles, to be used for
threshold setting of FD (Frame Delay) and FDV (Frame Delay Variation) measurements.

ethOamMeasureBinProfileEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1

Each entry in this table represents a profile that can be
bind to a Dest NE.

Indexes

ethOamMeasureBinProfileIndex

Column	Syntax	OID
ethOamMeasureBinProfileIndex This attribute defines the Measurement Bin profile index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.1
ethOamMeasureBinProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.2
ethOamMeasureBinProfileName A string to denote the profile's name.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.3
ethOamMeasureBinThresh The structure of this variable is as follows: Each consecutive 4 bytes represent a threshold value. There are up to 10 possible bins per measurement type (FD, FDV). The first 4 bytes represent the upper threshold of Bin…	OctetStringr/w Constraints: range: 36-36	.1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.4

This table holds a set of Frame Delay bin or Frame Delay Variation
counters in the current interval.
The number of bins is determined according to the Bin Profile selected
per Dest NE.
For Dest NE resolution (ethOamServiceIdx) refer to ethOamSvcCurrentStatTable.

ethOamDelayCurrentBinsEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.8.1

Each entry in the table holds a Frame Delay or Frame Delay Variation
bin counter of a Destination NE in the current interval.

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamDelayCurrentBinCounterType ethOamDelayCurrentBinNumber

Column	Syntax	OID
ethOamDelayCurrentBinCounterType Define counter type for current bin measurements (See Textual Convention for detailed defintion.)	EthOamBinCounterType Type Values: 1 rtDelay 2 rtDelayVar 3 fwDelay 4 fwDelayVar 5 bwDelay 6 bwDelayVar	.1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.1
ethOamDelayCurrentBinNumber This variable denotes the Frame Delay or Frame Delay Variation Bin number in the current interval. The bin upper threshold is derived from the corresponding bytes of ethOamMeasureBinThresh of the Bin Profile selected pe…	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.2
ethOamDelayCurrentBinValue This variable counts the number of frames that arrived in the current interval with delay or or Delay Variation falling within the bin range.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.3

This table holds a set of Frame Delay or Frame Delay Variation
bin counters in the last 24H period.
The number of bins is determined according to the Bin Profile selected
per Dest NE.

ethOamDelayIntervalBinsEntry row .1.3.6.1.4.1.164.3.1.6.1.3.2.10.1

Each entry in the table holds a Frame Delay or Frame Delay Variation
bin counter of a Destination NE in the selected interval.
For Dest NE resolution (ethOamServiceIdx) refer to ethOamSvcIntervalStatTable.

Indexes

radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcIntervalNum ethOamDelayIntervalBinCounterType ethOamDelayIntervalBinNumber

Column	Syntax	OID
ethOamDelayIntervalBinCounterType Define counter type for current bin measurements (See Textual Convention for detailed defintion.)	EthOamBinCounterType Type Values: 1 rtDelay 2 rtDelayVar 3 fwDelay 4 fwDelayVar 5 bwDelay 6 bwDelayVar	.1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.1
ethOamDelayIntervalBinNumber This variable denotes the Frame Delay or Frame Delay Variation bin number in the selected interval. The bin upper threshold is derived from the corresponding bytes of ethOamMeasureBinThresh of the Bin Profile selected p…	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.2
ethOamDelayIntervalBinValue This variable counts the number of frames in the selected interval that arrived with delay or Delay Variation falling within the bin range.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.3

The MaintenanceDomain table. Each row in the table represents
a different maintenance domain.
          
A Maintenance domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.

radMdEntry row .1.3.6.1.4.1.164.3.1.6.1.3.3.1

The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage

Indexes

radMdIndex

Column	Syntax	OID
radMdIndex The index to the maintenance domain table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.3.1.1
radMdFormat The type (and thereby format) of the Maintenance Domain Name.	Enumerationr/w Enumerated Values: 1 none 2 dnsLikeName 3 macAddressAndUint 4 charString	.1.3.6.1.4.1.164.3.1.6.1.3.3.1.2
radMdName The Maintenance Domain name. The type/format of this object is determined by the value of the radMdNameType object. Each Maintenance Domain has unique name amongst all those used or available to a servi…	OctetStringr/w Constraints: range: 1-43	.1.3.6.1.4.1.164.3.1.6.1.3.3.1.3
radMdRowStatus This attribute allows to create/delete a row in this table. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.1.3.3.1.4

This table contains a list of Linktrace replies 
received by a specific MEP in response to
a linktrace message.

radMepLtrEntry row .1.3.6.1.4.1.164.3.1.6.1.3.4.1

The LinktraceReply table entry.

Indexes

radOamIdx1 radMepIdx radMepLtrReceiveOrder

Column	Syntax	OID
radMepLtrReceiveOrder An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. radMepLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.1
radMepLtrTtl TTL field value for a returned LTR.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.2
radMepLtrMacAddr The MAC address in the header of the returned LTR.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.3
radMepLtrRelay The value returned in the Relay Action field: rlyHit - the LTM reached an MP whose MAC address matches the target MAC address. rlyFdb - the Egress Port was determined by consulting the Filtering Database. rlyMpdb - the …	Enumeration Enumerated Values: 1 rlyHit 2 rlyFdb 3 rlyMpdb	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.4
radMepLtrIngress The value returned in the Ingress Action Field of the LTM. ingNoTlv - no Reply Ingress TLV was returned in the LTM. ingOK - the target data frame would be passed through to the MAC Relay Entity. ingDown - the Bridge Por…	Enumeration Enumerated Values: 1 ingNoTlv 2 ingOk 3 ingDown 4 ingBlocked 5 ingVid	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.5
radMepLtrIngressPortIdSubtype The format of the Ingress Port ID. If the radMepLtrIngress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag clauses 12.14.7.5.3:m and 20.36.2.8	LLDP-MIBLldpPortIdSubtype Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.6
radMepLtrIngressPortId Ingress Port ID. This is an alpha-numeric string that contains a specific identifier for the port. The format of this object is determined by the value of the radMepLtrIngressPortIdSubtype object. If the radMepLtrIngr…	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.7
radMepLtrEgress The value returned in the Egress Action Field of the LTM. The value egrNoTlv(1) indicates that no Reply Egress TLV was returned in the LTM. 802.1ag clauses 12.14.7.5.3:o and 20.36.2.10	Enumeration Enumerated Values: 1 egrNoTlv 2 egrOK 3 egrDown 4 egrBlocked 5 egrVid	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.8
radMepLtrEgressPortIdSubtype The format of the egress Port ID. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag clauses 12.14.7.5.3:q and 20.36.2.12	LLDP-MIBLldpPortIdSubtype Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.9
radMepLtrEgressPortId Egress Port ID. The format of this object is determined by the value of the radMepLtrEgressPortIdSubtype object. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaning…	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.1.3.4.1.10

This table contains a list of CC Status  
received by a specific MEP from different Remote MEPs.

radMepCcStatusEntry row .1.3.6.1.4.1.164.3.1.6.1.3.5.1

An entry in the CC Status Table.

Indexes

radOamIdx1 radMepIdx radMepRemoteMepIdx

Column	Syntax	OID
radMepRemoteMepIdx This is a running index for arriving CC messages (from different Remote MEPs) for a specific MEP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.5.1.1
radMepCcStatusRemMepId This attribute indicates the Remote MEP ID from which the CC messages has arrived.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.5.1.2
radMepCcStat This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with the correct MEG level, but incorrect MEG ID. unexpected…	Enumeration Enumerated Values: 1 notApplicable 2 fail 3 ok 4 mismerge 5 unexpectedMep 6 unexpectedMeLevel 7 unexpectedPeriod 8 rdi	.1.3.6.1.4.1.164.3.1.6.1.3.5.1.3
radMepCcStatusMacAddr This object indicates the MAC Address in the CC Status message received.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.3.1.6.1.3.5.1.4

The Maintenance Domain table. Each row in the table represents
a different maintenance association.

dot1agXCfmMdEntry row .1.3.6.1.4.1.164.3.1.6.1.3.8.1

The Maintenance Domain table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex

Column	Syntax	OID
dot1agXCfmMdProtocol .	Enumerationr/w Enumerated Values: 1 preStandard 2 standard	.1.3.6.1.4.1.164.3.1.6.1.3.8.1.1

The Maintenance Association End Point (MEP) table.

dot1agXCfmMepEntry row .1.3.6.1.4.1.164.3.1.6.1.3.9.1

The MEP table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier

Column	Syntax	OID
dot1agXCfmMepContinuityVerMode This object determines the OAM behavior of the MEP: disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming CC messages lb_based - Continuity Verification is done based…	Enumerationr/w Enumerated Values: 2 disabled 3 ccBased 4 lbBased	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.1
dot1agXCfmMepDestAddrType This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address.	Enumerationr/w Enumerated Values: 1 unicast 2 multicast	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.2
dot1agXCfmMepDestMacAddr This object determines the MAC address that OAM packets are sent to.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.3
dot1agXCfmMepMappingProfile This attribute defines the Mapping/classification profile (flowMappingProfileTable ) assigned to this MEP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.4
dot1agXCfmMepQBlock This attribute defines the QBlock assigned to this MEP.	ObjectIdentifierr/w	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.5
dot1agXCfmMepFixedQueueMapping This attribute defines the queue (cosProfileTable) that will be assigned to the MEP. A value of 255 means that the Mep will use the profile according to dot1agXCfmMepQueueMappingProfile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.6
dot1agXCfmMepQueueMappingProfile This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MEP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.7
dot1agXCfmMepConvertedIndex This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this MEP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.8
dot1agXCfmMepPmDestAddrType This object defines the type of MAC Address being used by the PM frames (Delay Measurement frames and Loss Measurement frames).	Enumerationr/w Enumerated Values: 1 unicast 2 multicast	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.9
dot1agXCfmMepForwardingMode This variable denotes the mode MEP forwarding mode. If set to elan(2) mode, dot1agXCfmMepPmDestAddrType must be unicast(1).	Enumerationr/w Enumerated Values: 1 eline 2 elan	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.10
dot1agXCfmMepLbmDataTlvLength This variable denotes the length of the data TLV sent in LBM.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.11
dot1agXCfmMepClientMdLevel This variable denotes the client MD level to transmit ETH-AIS and LCK frames. It is irrelevant if the corresponding dot1agCfmMdMdLevel equals to 7. Otherwise, it value must be greater than the corresponding value of dot…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.12
dot1agXCfmMepAisTransmit This variable denotes if ETH-AIS frame transmission is enabled or not. It can be enabled only if the value of the corresponding dot1agCfmMdMdLevel is less than 7	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.13
dot1agXCfmMepAisInterval This variable denotes the interval of ETH-AIS frame transmission.	IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Type Values: 0 intervalInvalid 1 interval300Hz 2 interval10ms 3 interval100ms 4 interval1s 5 interval10s 6 interval1min 7 interval10min	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.14
dot1agXCfmMepAisPriority This variable denotes the priority of ETH-AIS frames.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.15
dot1agXCfmMepDefects An extnetion to dot1agCfmMepDefects which is A vector of Boolean error conditions, any of which may be true. A MEP can detect and report a number of defects, and multiple defects can be present at the same time. The fo…	Bitsr/w Enumerated Values: 0 bDefAIS 1 bDefLCK	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.16
dot1agXCfmMepLastAlarmDefect This object indicates the last defect that generated an alarm at the MEP: none no defects since FNG_RESET defRDICCM RDI CCM defMACstatus MAC status defRemoteCCM Remote CCM defErrorCCM Error CCM…	Enumeration Enumerated Values: 1 none 2 defRDICCM 3 defMACstatus 4 defRemoteCCM 5 defErrorCCM 6 defXconCCM 7 defAIS 8 defLCK	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.17
dot1agXCfmMepCosMapping This attribute defines MEP CoS mapping. The value 0..7 indicates fixed CoS selection. The value 255 defines using of dot1agXCfmMepCosMappingProfile OBJECT belonging to this table (see below).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.19
dot1agXCfmMepCosMappingProfile This attribute contains cosInternalProfileIndex that defines CoS mapping profile assigned to this MEP, see cosInternalProfileTable.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.20
dot1agXCfmMepCcStatus This obejct indicates the Continuity Check status. If no bit is set then it means that the ststus is ok. If notApplicable (0) is set then the other bits should not be set. If otherFail (1) is set then the other bits sho…	Bits Enumerated Values: 0 notApplicable 1 otherFail 2 mismerge 3 unexpectedMep 4 unexpectedMepLevel 5 unexpectedPeriod	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.24
dot1agXCfmMepStatus This objects indicates the test status of the MEP.	Enumeration Enumerated Values: 1 none 2 y1564 3 rfc2544 4 mef46Loop	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.28
dot1agXCfmMepExcludeCustomerTags This objects denotes whether the tag structure of transmitted OAM frames includes or excludes the customer tags (C-tags). A value of true(1) forbids C-tags on OAM frames. A value of false(2) allows C-tags…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.29
dot1agXCfmMepClearStatsCmd A command that instructs the agent to clear running statistics of selected MEP. Setting this object to on(3), shall clear the MEP statistics. Upon completion, the value shall automatically change to off(2).	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.30
dot1agXCfmMepTimeElapsed The number of seconds that have elapsed since the beginning of the current statistics interval of the MEPs (local and remote). (Time elapsed is common to MEP current interval statistics tables: ethOamMepCurrentTable …	Unsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.31
dot1agXCfmMepCcmTx Total number of CCM PDUs transmitted by the MEP	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.3.1.6.1.3.9.1.32