Q-IN-Q-MIB Table View

A table that contains Q-in-Q VLAN mode information about each port.

swQinQPortEntry row .1.3.6.1.4.1.171.12.57.3.1.1

A list of Q-in-Q VLAN mode information for each port.

Indexes

swQinQPortIndex

Column	Syntax	OID
swQinQPortIndex This object indicates the module's port number.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.57.3.1.1.1
swQinQPortRole This object sets the port role in Q-in-Q mode. It can be UNI port or NNI port.	Enumerationr/w Enumerated Values: 1 nni 2 uni	.1.3.6.1.4.1.171.12.57.3.1.1.2
swQinQPortMissDrop This object is used to enable/disable C-VLAN based SP-VLAN assignment miss drop. If missdrop is enabled, the packet that does not match any assignment rule in the Q-in-Q profile will be dropped. If missdrop is disabled,…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.57.3.1.1.3
swQinQPortTpid Specifies the outer TPID for each port.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.57.3.1.1.4
swQinQPortUseInnerPriority This object specifies whether to use the priority in the C-VLAN tag as the priority in the SP-VLAN tag.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.57.3.1.1.5
swQinQPortInnerTagState Specifies whether to add inner tag for ingress untagged packets.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.57.3.1.1.6
swQinQPortInnerTag If swQinQPortInnerTagState is enabled, this object specifies the inner tag.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.57.3.1.1.7
swQinQPortTrustCVID If swQinQState is enabled, this object specifies whether to use the C-VID of the ingress packet to get S-VID on the UNI port or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.57.3.1.1.8
swQinQPortVlanTranslation If swQinQState and swQinQPortTrustCVID are enabled, this object specifies whether to lookup VLAN translation table to get S-VID by the C-VID of the ingress packet on the UNI port or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.57.3.1.1.9
swQinQPortInnerTpid Specifies the inner TPID for each port.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.12.57.3.1.1.10

A table that is used to configure a port's Q-in-Q SP-VLAN assignment rule.

swQinQPortRuleEntry row .1.3.6.1.4.1.171.12.57.3.2.1

A list of Q-in-Q SP-VLAN assignment rules for each port.

Indexes

swQinQPortRuleIndex swQinQProfileId

Column	Syntax	OID
swQinQPortRuleIndex This object indicates the module's port number.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.57.3.2.1.1
swQinQProfileId This object indicates the Q-in-Q profile ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.57.3.2.1.2
swQinQPortRuleRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.3.2.1.3

A table that contains VLAN translation information.

swVlanTranslateEntry row .1.3.6.1.4.1.171.12.57.3.3.1

A list of VLAN translation information.

Indexes

swVlanTranslatePortIndex swVlanTranslateCVID

Column	Syntax	OID
swVlanTranslatePortIndex This object indicates the module's port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.57.3.3.1.1
swVlanTranslateCVID The customer VLAN identifier in a C-TAG.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.3.3.1.2
swVlanTranslateSVID A VLAN identifier conveyed in an S-TAG.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.3.3.1.3
swVlanTranslateSVIDOperation The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by…	Enumerationr/w Enumerated Values: 1 add 2 replace	.1.3.6.1.4.1.171.12.57.3.3.1.4
swVlanTranslatePriority The priority of the S-TAG. -1 is default value.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.57.3.3.1.5
swVlanTranslateRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.3.3.1.6

A table that contains Double Tag VLAN translation information.

swDoubleVlanTranslateEntry row .1.3.6.1.4.1.171.12.57.3.4.1

A list of Double Tag VLAN translation information
, only work on NNI port.

Indexes

swDoubleVlanTranslatePortIndex swDoubleVlanTranslateSVID swDoubleVlanTranslateCVID

Column	Syntax	OID
swDoubleVlanTranslatePortIndex This object indicates the module's port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.57.3.4.1.1
swDoubleVlanTranslateSVID The customer VLAN identifier in a S-TAG.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.3.4.1.2
swDoubleVlanTranslateCVID The customer VLAN identifier in a C-TAG.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.3.4.1.3
swDoubleVlanTranslateOperation The 'replace' action indicates to replace the S-VLAN in the tag by the New S-VLAN.	Enumerationr/w Enumerated Values: 2 replace	.1.3.6.1.4.1.171.12.57.3.4.1.4
swDoubleVlanTranslateNewSVID The SP-VLAN identifier used to replace.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.3.4.1.5
swDoubleVlanTranslatePriority The priority of the S-TAG. -1 is default value.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.57.3.4.1.6
swDoubleVlanTranslateRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.3.4.1.7

This table is used to create a Q-in-Q profile to assign SP-VLAN.
Multiple rules can be specified for a Q-in-Q profile.

swQinQProfileEntry row .1.3.6.1.4.1.171.12.57.4.1.1

A list containing Q-in-Q profile information.

Indexes

swQinQProfileID

Column	Syntax	OID
swQinQProfileID Specifies the Q-in-Q profile ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.57.4.1.1.1
swQinQProfileRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.4.1.1.2

This table contains Q-in-Q rule information. These rules will
indicate whether to add a tag for the SP-VLAN or to replace the
inner C-VLAN in the tag by the SP-VLAN. If the matched packet
has a SP-VLAN tag and the action is 'add', this rule will not
take effect for the packet. If the matched packet has no C-VLAN
tag and the action is 'replace', this rule will not take effect too.
          
C-VLAN based Q-in-Q rules have lower priority than flow-based Q-in-Q rules.
For flow-based Q-in-Q rules in the same profile, the rule's priority is
decided by the rule's ID; a smaller ID has a higher priority.

swQinQRuleEntry row .1.3.6.1.4.1.171.12.57.4.2.1

A list of information about Q-in-Q rules.

Indexes

swQinQRuleProfileID swQinQRuleAccessID

Column	Syntax	OID
swQinQRuleProfileID Specifies the profile ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.57.4.2.1.1
swQinQRuleAccessID Specifies the ID of the Q-in-Q rule entry related to the swQinQRuleProfileID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.57.4.2.1.2
swQinQRuleClassifySrcMacAddr Specifies the source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.57.4.2.1.3
swQinQRuleClassifySrcMacAddrMask Specifies the source MAC address mask.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.57.4.2.1.4
swQinQRuleClassifyDstMacAddr Specifies the destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.57.4.2.1.5
swQinQRuleClassifyDstMacAddrMask Specifies the destination MAC address mask.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.57.4.2.1.6
swQinQRuleSrcIPv4Address Specifies an IPv4 source address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.57.4.2.1.7
swQinQRuleSrcIPv4AddrMask Specifies the IPv4 source address mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.57.4.2.1.8
swQinQRuleDstIPv4Address Specifies an IPv4 destination address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.57.4.2.1.9
swQinQRuleDstIPv4AddrMask Specifies the IPv4 destination address mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.57.4.2.1.10
swQinQRuleInnerVid Specifies the packet's inner VID range.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.57.4.2.1.11
swQinQRuleOuterVid Specifies the packet's outer VID range.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.57.4.2.1.12
swQinQRule8021p Specifies the packet's 802.1p priority. -1 means the 802.1p priority is not set	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.57.4.2.1.13
swQinQRuleIpProtocol Specifies the IP protocol.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.57.4.2.1.14
swQinQRuleSourcePort Specifies the source port number.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.57.4.2.1.15
swQinQRuleDestinationPort Specifies the destination port number.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.57.4.2.1.16
swQinQRuleSpvidOperation The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLA…	Enumerationr/w Enumerated Values: 1 add 2 replace	.1.3.6.1.4.1.171.12.57.4.2.1.17
swQinQRuleSpvid Specifies the SP-VLAN ID to be assigned to the matched packet.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.171.12.57.4.2.1.18
swQinQPriority Specifies the priority of the SP-VLAN. -1 is default value.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.57.4.2.1.19
swQinQRuleRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.4.2.1.20
swQinQRuleActivePort Specifies the active port list which the rule takes effect.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.12.57.4.2.1.21

A table that contains VLAN translation information applied in enabling
port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.

swVlanTranslationCVIDEntry row .1.3.6.1.4.1.171.12.57.4.3.1

A list of VLAN translation information applied in enabling a
port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.

Indexes

swVlanTranslationCVID

Column	Syntax	OID
swVlanTranslationCVID The customer VLAN identifier in a C-TAG.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.4.3.1.1
swVlanTranslationSVID A VLAN identifier conveyed in an S-TAG.	VlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.57.4.3.1.2
swVlanTranslationSVIDOperation The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by…	Enumerationr/w Enumerated Values: 1 add 2 replace	.1.3.6.1.4.1.171.12.57.4.3.1.3
swVlanTranslationCVIDRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.57.4.3.1.4