swQinQRuleSpvidOperation

Q-IN-Q-MIB · .1.3.6.1.4.1.171.12.57.4.2.1.17
MIB view Table view

Object

column r/w Enumeration 
The 'add' action indicates to add a tag for the assigned SP-VLAN
before the C-VLAN tag. If there is S-TAG in the packet, this rule
will not take effect.
              
The 'replace' action indicates to replace the C-VLAN in the tag by
the SP-VLAN. If there is no C-TAG in the packet, this rule will not
take effect.

Context

MIB
Q-IN-Q-MIB
OID
.1.3.6.1.4.1.171.12.57.4.2.1.17
Type
column
Access
readwrite
Status
current
Parent
swQinQRuleEntry
Table
swQinQRuleTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1add
2replace

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swQinQRuleProfileID
Specifies the profile ID.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.1
swQinQRuleDstIPv4AddrMask
Specifies the IPv4 destination address mask.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.12.57.4.2.1.10
swQinQRuleInnerVid
Specifies the packet's inner VID range.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.171.12.57.4.2.1.11
swQinQRuleOuterVid
Specifies the packet's outer VID range.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.171.12.57.4.2.1.12
swQinQRule8021p
Specifies the packet's 802.1p priority. -1 means the 802.1p priority is not set
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.13
swQinQRuleIpProtocol
Specifies the IP protocol.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.14
swQinQRuleSourcePort
Specifies the source port number.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.15
swQinQRuleDestinationPort
Specifies the destination port number.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.16
swQinQRuleSpvid
Specifies the SP-VLAN ID to be assigned to the matched packet.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.18
swQinQPriority
Specifies the priority of the SP-VLAN. -1 is default value.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.19
swQinQRuleAccessID
Specifies the ID of the Q-in-Q rule entry related to the swQinQRuleProfileID.
columnInteger32.1.3.6.1.4.1.171.12.57.4.2.1.2
swQinQRuleRowStatus
This object indicates the status of this entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.12.57.4.2.1.20
swQinQRuleActivePort
Specifies the active port list which the rule takes effect.
columnQ-BRIDGE-MIBPortList.1.3.6.1.4.1.171.12.57.4.2.1.21
swQinQRuleClassifySrcMacAddr
Specifies the source MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.57.4.2.1.3
swQinQRuleClassifySrcMacAddrMask
Specifies the source MAC address mask.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.57.4.2.1.4
swQinQRuleClassifyDstMacAddr
Specifies the destination MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.57.4.2.1.5
swQinQRuleClassifyDstMacAddrMask
Specifies the destination MAC address mask.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.57.4.2.1.6
swQinQRuleSrcIPv4Address
Specifies an IPv4 source address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.12.57.4.2.1.7
swQinQRuleSrcIPv4AddrMask
Specifies the IPv4 source address mask.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.12.57.4.2.1.8
swQinQRuleDstIPv4Address
Specifies an IPv4 destination address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.12.57.4.2.1.9